Impact of Various Creep–Fatigue Interaction Loading Waveforms at 873 K on the Subgrains and M23C6 Carbides Interrelations and Stability in P91 Steel Weld Joints
Source abstract
Abstract
Abstract P91 steel and its weld joint (WJ) have been selected for the present study with the goal, to investigate the combined effects of fatigue and creep loadings [known as creep–fatigue interaction (CFI)] on the microstructures of the five constituting zones of actual P91 steel WJ when it is subjected to various types of CFI loading waveforms. Experiments were conducted at constant strain rate (3 × 10−3 s−1), temperature (873 K), and total strain amplitude (± 0.6 pct); the CFI loadings comprised of unsymmetrical loadings (short or long tensile/compressive holds) and symmetrical loadings (tensile plus compressive holds/pure fatigue). The hierarchical boundaries within the prior austenite grains and M23C6 carbides at the boundaries are investigated. Under CFI loading, the interrelations between the stabilities of M23C6 carbides at the hierarchical boundaries and the subgrains were found to be dependent upon the microstructural zone of the WJ in consideration, symmetricity/asymmetricity of the applied waveform and the extents of creep/fatigue contributions in the CFI waveform cycles. The subgrains of soft regions (intercritical and fine grain) and base metal were at stake under larger fatigue contributions, whereas the subgrains of hard regions (coarse grain and weld metal) were unaffected by the CFI loadings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. M. Tabuchi and Y. Takahashi: Proceedings of the ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference, 2006, vol. 6, pp. 529–34. https://doi.org/10.1115/PVP2006-ICPVT-11-93350.10.1115/PVP2006-ICPVT-11-93350 ↗
2. J. Hald: Steel Res., 1996, vol. 67, pp. 369–74. https://doi.org/10.1002/srin.199605503.10.1002/srin.199605503 ↗
3. H. Zhou, J. Li, J. Liu, P. Yu, X. Liu, Z. Fan, A. Hu, and Y. He: Sci. Rep., 2024, vol. 14, pp. 1–3. https://doi.org/10.1038/s41598-024-55557-w.10.1038/s41598-024-55557-w ↗
4. S. Kumar, C. Pandey, and A. Goyal: Int. J. Press. Vessel. Pip., 2020, vol. 185, . https://doi.org/10.1016/j.ijpvp.2020.104128.10.1016/j.ijpvp.2020.104128 ↗
5. A. Czyrska-filemonowicz, A. Zielińska-lipiec, and P.J. Ennis: J. Achiev. Mater. Manuf. Eng., 2006, vol. 19, pp. 43–48.
6. A. Chauhan, L. Strassberger, U. Führer, D. Litvinov, and J. Aktaa: Int. J. Fatigue, 2017, vol. 102, pp. 97–111. https://doi.org/10.1016/j.ijfatigue.2017.05.003.10.1016/j.ijfatigue.2017.05.003 ↗
7. K.-K. Wang, J.-F. Wen, R.-Z. Wang, T. Ye, J. Wang, J.-P. Tan, H.-F. Chen, X.-C. Zhang, and S.-T. Tu: Int. J. Fatigue, 2024, vol. 187, p. 108448. https://doi.org/10.1016/j.ijfatigue.2024.108448.10.1016/j.ijfatigue.2024.108448 ↗
8. C. Pandey, M.M. Mahapatra, P. Kumar, and N. Saini: J. Alloys Compd., 2018, vol. 743, pp. 332–64. https://doi.org/10.1016/j.jallcom.2018.01.120.10.1016/j.jallcom.2018.01.120 ↗
9. A. Fabricius and P.S. Jackson: Eng. Fail. Anal., 2016, vol. 66, pp. 398–406. https://doi.org/10.1016/j.engfailanal.2016.04.024.10.1016/j.engfailanal.2016.04.024 ↗
10. Technical Report, Electrical Power Research Institute, 2015.
11. Y. Wang, R. Kannan, and L. Li: Mater Charact, 2016, vol. 118, pp. 225–34. https://doi.org/10.1016/j.matchar.2016.05.024.10.1016/j.matchar.2016.05.024 ↗
12. T. Sakthivel, K. Laha, M. Vasudevan, M.K. Rao, and S.P. Selvi: Mater. High Temp., 2016, vol. 33, pp. 137–53. https://doi.org/10.1080/09603409.2015.1137158.10.1080/09603409.2015.1137158 ↗
13. F. Abe and M. Tabuchi: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 22–30. https://doi.org/10.1179/136217104225017107.10.1179/136217104225017107 ↗
14. V. Shankar, K. Mariappan, R. Sandhya, M.D. Mathew, and T. Jayakumar: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1390–400. https://doi.org/10.1007/s11661-013-2108-x.10.1007/s11661-013-2108-x ↗
15. W.B. Jones and J.A. Van Den Avyle: Metall. Trans. A, 1980, vol. 11A, pp. 1275–86. https://doi.org/10.1007/BF02653481.10.1007/BF02653481 ↗
16. V. Shankar, M. Valsan, K.B.S. Rao, R. Kannan, S.L. Mannan, and S.D. Pathak: Mater. Sci. Eng. A, 2006, vol. 437, pp. 413–22. https://doi.org/10.1016/j.msea.2006.07.146.10.1016/j.msea.2006.07.146 ↗
17. V. Shankar, V. Bauer, R. Sandhya, M.D. Mathew, and H.J. Christ: J. Nucl. Mater., 2012, vol. 420, pp. 23–30. https://doi.org/10.1016/j.jnucmat.2011.08.048.10.1016/j.jnucmat.2011.08.048 ↗
18. V. Shankar, K. Mariappan, R. Sandhya, K. Laha, and A.K. Bhaduri: Int. J. Fatigue, 2017, vol. 98, pp. 259–68. https://doi.org/10.1016/j.ijfatigue.2017.01.033.10.1016/j.ijfatigue.2017.01.033 ↗
19. P. Vaishali and V. Shankar: J. Mater. Sci., 2023, vol. 58, pp. 15901–16. https://doi.org/10.1007/s10853-023-09002-4.10.1007/s10853-023-09002-4 ↗
20. K. Mariappan and A. Nagesha: Mater. Sci. Eng. A, 2023, vol. 866, p. 144695. https://doi.org/10.1016/j.msea.2023.144695.10.1016/j.msea.2023.144695 ↗
21. E. Cerri, E. Evangelista, S. Spigarelli, and P. Bianchi: Mater. Sci. Eng. A, 1998, vol. 245, pp. 285–92. https://doi.org/10.1016/S0921-5093(97)00717-X.10.1016/S0921-5093(97)00717-X ↗
22. A. Aghajani, C. Somsen, and G. Eggeler: Acta Mater., 2009, vol. 57, pp. 5093–106. https://doi.org/10.1016/j.actamat.2009.07.010.10.1016/j.actamat.2009.07.010 ↗
23. C. Panait, A. Zielinska-Lipiec, T. Koziel, A. Czyrska-Filemonowicz, A.F. Gourgues- Lorenzon, W. Bendick, C. G. Panait, A. Zieli: Mater. Sci. Eng. A 2010, vol. 527, pp. 4062–6910.1016/j.msea.2010.03.010 ↗
24. H.G. Armaki, R. Chen, K. Maruyama, M. Igarashi: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2011, vol. 42, pp. 3084–94. https://doi.org/10.1007/s11661-011-0726-810.1007/s11661-011-0726-8 ↗
25. H. Zhao, Z. Wang, X. Han, and M. Wang: Materials (Basel), 2022, vol. 15, p. 2847. https://doi.org/10.3390/ma15082847.10.3390/ma15082847 ↗
26. G. Eggeler: Acta Metall., 1989, vol. 37, pp. 3225–34. https://doi.org/10.1016/0001-6160(89)90194-6.10.1016/0001-6160(89)90194-6 ↗
27. P. Anderson, T. Bellgardt, and F.L. Jones: Mater. Sci. Technol., 2003, vol. 19, pp. 207–13. https://doi.org/10.1179/026708303225009436.10.1179/026708303225009436 ↗
28. H.G. Armaki, R. Chen, S. Kano, K. Maruyama, Y. Hasegawa, and M. Igarashi: J. Nucl. Mater., 2011, vol. 416, pp. 273–79.10.1016/j.jnucmat.2011.06.007 ↗
29. K. Guguloth, S. Sivaprasad, D. Chakrabarti, S. Tarafder: Mater. Sci. Eng. A, 2014, vol. 604, pp. 196–206. https://doi.org/10.1016/j.msea.2014.02.076.10.1016/j.msea.2014.02.076 ↗
30. G. Golański and S. Mrozinski: Eng. Fail. Anal., 2013, vol. 35, pp. 692–702. https://doi.org/10.1016/j.engfailanal.2013.06.019.10.1016/j.engfailanal.2013.06.019 ↗
31. R. Mishnev, N. Dudova, and R. Kaibyshev: ISIJ Int., 2015, vol. 55, pp. 2469–76. https://doi.org/10.2355/isijinternational.ISIJINT-2015-336.10.2355/isijinternational.ISIJINT-2015-336 ↗
32. Z. Zhang, Z. Hu, L. Fan, and B. Wang: J. Iron. Steel Res. Int., 2015, vol. 22, pp. 534–42. https://doi.org/10.1016/S1006-706X(15)30037-6.10.1016/S1006-706X(15)30037-6 ↗
33. P. Verma, N.C.S. Srinivas, S.R. Singh, and V. Singh: Mater. Sci. Eng. A, 2016, vol. 652, pp. 30–41. https://doi.org/10.1016/j.msea.2015.11.060.10.1016/j.msea.2015.11.060 ↗
34. H. Jing, Z. Luo, L. Xu, L. Zhao, and Y. Han: Mater. Sci. Eng. A, 2018, vol. 731, pp. 394–402. https://doi.org/10.1016/j.msea.2018.06.071.10.1016/j.msea.2018.06.071 ↗
35. A. Chauhan, D. Litvinov, and J. Aktaa: Int. J. Fatigue, 2016, vol. 93, pp. 1–7. https://doi.org/10.1016/j.ijfatigue.2016.08.003.10.1016/j.ijfatigue.2016.08.003 ↗
36. V. Shankar, S.D. Yadav, and K. Mariappan: Mater. Lett., 2019, vol. 234, pp. 257–60. https://doi.org/10.1016/j.matlet.2018.09.110.10.1016/j.matlet.2018.09.110 ↗
37. H.C. Whitt, T.K. Payton, Z. Kaiwen, M.J. Mills, W. Zhang: Final Report (No. DOE/NEUP-13-4948), The Ohio State Univ., Columbus, OH (United States), 2018.
38. J. Dubey, H. Chilukuru, J.K. Chakravartty, M. Schwienheer, A. Scholz, and W. Blum: Mater. Sci. Eng. A, 2005, vol. 406, pp. 152–59. https://doi.org/10.1016/j.msea.2005.06.029.10.1016/j.msea.2005.06.029 ↗
39. M. Kimura, K. Yamaguchi, M. Hayakawa, K. Kobayashi, and K. Kanazawa: Int. J. Fatigue, 2006, vol. 28, pp. 300–08. https://doi.org/10.1016/j.ijfatigue.2005.04.013.10.1016/j.ijfatigue.2005.04.013 ↗
40. B. Fournier, F. Dalle, M. Sauzay, J. Longour, M. Salvi, C. Caës, I. Tournié, P.F. Giroux, and S.H. Kim: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6934–45. https://doi.org/10.1016/j.msea.2011.05.046.10.1016/j.msea.2011.05.046 ↗
41. R.P. Chen, H.G. Armaki, K. Maruyama, and M. Igarashi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4390–94.10.1016/j.msea.2011.02.060 ↗
42. A. Armas, C. Petersen, R. Schmitt, M. Avalos, and I. Alvarez: J. Nucl. Mater., 2002, vol. 307, pp. 509–13. https://doi.org/10.1016/S0022-3115(02)01086-3.10.1016/S0022-3115(02)01086-3 ↗
43. R. Mishnev, N. Dudova, and R. Kaibyshev: Int. J. Fatigue, 2020, vol. 134, 105522. https://doi.org/10.1016/j.ijfatigue.2020.105522.10.1016/j.ijfatigue.2020.105522 ↗
44. W. Zhong-Guang, K. Rahka, P. Nenonen, C. Laird: Acta Metall., 1985, vol. 33, pp. 2129–41. https://doi.org/10.1016/0001-6160(85)90174-9.10.1016/0001-6160(85)90174-9 ↗
45. F. Benjamin, S. Maxime, R. Alexandra, B. Françoise, and P. André: J. Nucl. Mater., 2009, vol. 386–388, pp. 71–74. https://doi.org/10.1016/j.jnucmat.2008.12.061.10.1016/j.jnucmat.2008.12.061 ↗
46. A. Sarkar, D. Vijayanand, P. Padmanabhan, V. Shankar, R. Sandhya, K. Laha, M.D. Mathew, T. Jayakumar, and E. Kumar: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3023–35. https://doi.org/10.1007/s11661-014-2237-x.10.1007/s11661-014-2237-x ↗
47. X. Wang, W. Zhang, J. Gong, and M.A. Wahab: J. Nucl. Mater., 2018, vol. 505, pp. 73–84. https://doi.org/10.1016/j.jnucmat.2018.03.055.10.1016/j.jnucmat.2018.03.055 ↗
48. S.-L. Zhang, F.-Z. Xuan, S.-J. Guo, and P. Zhao: Int. J. Mech. Sci., 2017, vol. 122, pp. 95–103. https://doi.org/10.1016/j.ijmecsci.2017.01.018.10.1016/j.ijmecsci.2017.01.018 ↗
49. V. Shankar, K. Mariappan, R. Sandhya, K. Laha, T. Jayakumar, and E.R. Kumar: Fusion Eng. Des., 2015, vol. 100, pp. 314–20. https://doi.org/10.1016/j.fusengdes.2015.06.191.10.1016/j.fusengdes.2015.06.191 ↗
50. V. Shankar, M. Valsan, K.B.S. Rao, and S.D. Pathak: Trans. Indian Inst. Met., 2010, vol. 63, pp. 622–27. https://doi.org/10.1007/s12666-010-0093-y.10.1007/s12666-010-0093-y ↗
51. R.S. Vidyarthy and D.K. Dwivedi: Mater. Res. Express, 2019, vol. 6, p. 0865f7. https://doi.org/10.1088/2053-1591/ab269910.1088/2053-1591/ab2699 ↗
52. ASTM E606/E606M-12: Standard Test Method for Strain-Controlled Fatigue Testing, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2012.
53. ASTM E2714-09: Standard Test Method for Creep-Fatigue Testing, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2009.
54. V. Shankar, K. Mariappan, R. Sandhya, and M.D. Mathew: Procedia Eng., 2013, vol. 55, pp. 128–35.10.1016/j.proeng.2013.03.231 ↗
55. K.B.S. Rao, M. Valsan, R. Sandhya, S.K. Ray, S.L. Mannan, and P. Rodriguez: Int. J. Fatigue, 1985, vol. 7, pp. 141–47. https://doi.org/10.1016/0142-1123(85)90024-6.10.1016/0142-1123(85)90024-6 ↗
56. K.B.S. Rao, M. Valsan, R. Sandhya, S.L. Mannan, and P. Rodriguez: High Temp. Mater. Process., . https://doi.org/10.1515/HTMP.1986.7.2-3.17110.1515/HTMP.1986.7.2-3.171 ↗
57. F.J. Humphreys: Scr. Mater., 2004, vol. 51, pp. 771–76.10.1016/j.scriptamat.2004.05.016 ↗
58. K.P. Mingard, A.P. Day, and P.N. Quested: IOP Conf. Ser. Mater. Sci. Eng. . https://doi.org/10.1088/1757-899X/55/1/01201110.1088/1757-899X/55/1/012011 ↗
59. R.C. Hildyard, S. Llana-fúnez, J. Wheeler, D.R. Faulkner, and D.J. Prior: J. Petrol., 2011, vol. 52, pp. 839–56. https://doi.org/10.1093/petrology/egr004.10.1093/petrology/egr004 ↗
60. M. Park and H. Jung: Geosci. J., 2020, vol. 24, pp. 679–87. https://doi.org/10.1007/s12303-020-0002-2.10.1007/s12303-020-0002-2 ↗
61. S.P.F. Bordín, J.M. Ranalli, V. Galván, G. Castellano, and S. Limandri: Mater Charact, 2023, vol. 195, p. 112525. https://doi.org/10.1016/j.matchar.2022.112525.10.1016/j.matchar.2022.112525 ↗
62. S.V. Raj, I.S. Iskovitz, and A.D. Freed: Unified Const. Laws Plast. Deform., 1996, pp. 343–439.10.1016/B978-012425970-6/50009-6 ↗
63. R. Sandström: Basic Modeling and Theory of Creep of Metallic Materials, 2024.10.1007/978-3-031-49507-6 ↗
64. S.V. Raj and G.M. Pharr: Mater. Sci. Eng. A, 1989, vol. 122, pp. 233–42. https://doi.org/10.1016/0921-5093(89)90635-7.10.1016/0921-5093(89)90635-7 ↗
65. F. Sun, Y. Adachi, K. Sato, T. Ishimoto, T. Nakano, and Y. Koizumi: Materials (Basel)., 2024, 17, vol. 17. https://doi.org/10.3390/ma1708185110.3390/ma17081851 ↗
66. J. Peŝiĉka, A. Dronhofer, and G. Eggeler: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 176–80. https://doi.org/10.1016/j.msea.2004.03.080.10.1016/j.msea.2004.03.080 ↗
67. T.G. Langdon: F. Bassani, G.L. Liedl, and P.B.T.-E. of C.M.P. Wyder, eds., Elsevier, Oxford, 2005, pp. 280–86.
68. J.P. Wharry, Z. Jiao, V. Shankar, J.T. Busby, and G.S. Was: J. Nucl. Mater., 2011, vol. 417, pp. 140–44. https://doi.org/10.1016/j.jnucmat.2010.12.052.10.1016/j.jnucmat.2010.12.052 ↗
69. T. Goswami: Int. J. Fatigue, 1999, vol. 21, pp. 55–76. https://doi.org/10.1016/S0142-1123(98)00056-5.10.1016/S0142-1123(98)00056-5 ↗
70. R. Kannan, V. Ganesan, K. Mariappan, G. Sukumaran, R. Sandhya, M.D. Mathew, and K.B.S. Rao: Nucl. Eng. Des., 2011, vol. 241, pp. 2807–12. https://doi.org/10.1016/j.nucengdes.2011.04.043.10.1016/j.nucengdes.2011.04.043 ↗
71. A. Chauhan, J. Hoffmann, D. Litvinov, and J. Aktaa: Mater. Sci. Eng. A, 2018, vol. 730, pp. 197–206. https://doi.org/10.1016/j.msea.2018.05.107.10.1016/j.msea.2018.05.107 ↗
72. G.S. Was: Fundamentals of Radiation Materials Science: Metals and Alloys, 2nd ed. Springer, New York, 2016.
73. D. Tabor: The Hardness of Metals, Oxford University Press, London, 1951.
74. V.T. Paul, S. Saroja, and M. Vijayalakshmi: J. Nucl. Mater., 2008, vol. 378, pp. 273–81. https://doi.org/10.1016/j.jnucmat.2008.06.033.10.1016/j.jnucmat.2008.06.033 ↗
75. T. Nakajima, S. Spigarelli, E. Evangelista, and T. Endo: Mater. Trans., 2003, vol. 44, pp. 1802–808. https://doi.org/10.2320/matertrans.44.1802.10.2320/matertrans.44.1802 ↗
76. .[76] D. Dingley: J. Microsc., 2004, vol. 213, pp. 214–24. https://doi.org/10.1111/j.0022-2720.2004.01321.x10.1111/j.0022-2720.2004.01321.x ↗
77. D. Litvinov, A. Chauchan, and J. Aktaa: Eur. Microsc. Congr. 2016 Proc., 2016, pp. 850–51. https://doi.org/10.1002/9783527808465.emc2016.609510.1002/9783527808465.emc2016.6095 ↗
78. Y. Wang, R. Kannan, L. Li: Mater. Des., 2020, vol. 190, p. 108570. https://doi.org/10.1016/j.matdes.2020.10857010.1016/j.matdes.2020.108570 ↗
79. J.A. Francis, W. Mazur, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 1387–95. https://doi.org/10.1179/174328406X148778.10.1179/174328406X148778 ↗
80. Y. Liu, S. Tsukamoto, T. Shirane, and F. Abe: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4626–33. https://doi.org/10.1007/s11661-013-1801-0.10.1007/s11661-013-1801-0 ↗
81. Y. Liu, S. Tsukamoto, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1306–14. https://doi.org/10.1007/s11661-013-2072-5.10.1007/s11661-013-2072-5 ↗
82. A.S. Argon: R. W. Cahn and P Haasent, Physical Metallurgy, 4th edition, Elsevier Science BV, North-Holland, 1996, pp. 1878–1980.
83. C. Gadelmeier, S. Haas, T. Lienig, A. Manzoni, M. Feuerbacher, and U. Glatzel: Metals (Basel), 2020, . https://doi.org/10.3390/met10111412.10.3390/met10111412 ↗
84. C. Payares, H. Katsumoto, and S. Liu: Weld. J. (Miami, Fla), 2008, vol. 87, pp. 279s-289s.
85. J. Hidalgo and M.J. Santofimia: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 5288–301. https://doi.org/10.1007/s11661-016-3525-4.10.1007/s11661-016-3525-4 ↗
86. C. Li, J. Chen, X. Tu, and Y. Han: J. Manuf. Process., 2021, vol. 67, pp. 1–1. https://doi.org/10.1016/j.jmapro.2021.04.039.10.1016/j.jmapro.2021.04.039 ↗
87. S.C. Kennett, G. Krauss, and K.O. Findley: Scr. Mater., 2015, vol. 107, pp. 123–26. https://doi.org/10.1016/j.scriptamat.2015.05.036.10.1016/j.scriptamat.2015.05.036 ↗
88. A. Pham, T. Ohba, S. Morito, T. Hayashi, T. Furuhara, and G. Miyamoto: Mater. Sci. Forum, 2013, vol. 738–739, pp. 25–29. https://doi.org/10.4028/www.scientific.net/MSF.738-739.25.10.4028/www.scientific.net/MSF.738-739.25 ↗
89. J. Dong, C. Liu, Y. Liu, C. Li, Q. Guo, and H. Li: Mater. Sci. Forum, 2016, vol. 848, pp. 624–32. https://doi.org/10.4028/www.scientific.net/MSF.848.624.10.4028/www.scientific.net/MSF.848.624 ↗
90. R. Han, G. Yang, Z. Fu, D. Xu, Y. Xu, and G. Zhao: Mater Charact, 2023, vol. 203, 113139. https://doi.org/10.1016/j.matchar.2023.113139.10.1016/j.matchar.2023.113139 ↗
91. M. Shamsujjoha: Mater. Sci. Eng. A, 2020, vol. 776, p. 139039. https://doi.org/10.1016/j.msea.2020.139039.10.1016/j.msea.2020.139039 ↗
92. K. Mariappan: PhD thesis, Homi Bhabha National Institute, 2021.
93. Z. Zhang, Z. Hu, S. Schmauder : S. Schmauder, C.-S. Chen, K.K. Chawla, N. Chawla, W. Chen, Y. Kagawa, Handbook of Mechanics of Materials. Springer, Singapore, 2019: pp. 1629–74. https://doi.org/10.1007/978-981-10-6884-3_3410.1007/978-981-10-6884-3_34 ↗
94. M. Li, L. Wang, and J. Almer: Acta Mater., 2014, vol. 76, pp. 381–93. https://doi.org/10.1016/j.actamat.2014.05.026.10.1016/j.actamat.2014.05.026 ↗
95. Z. Zhang, Z. Hu, S. Schmauder, B. Zhang, and Z. Wang: Mater Charact, 2019, vol. 157, 109923. https://doi.org/10.1016/j.matchar.2019.109923.10.1016/j.matchar.2019.109923 ↗
96. A. Gaur, Efect of strainageing on welded or nonwelded low carbon steel, BTech thesis, National Institute of Technology Rourkela (2010).
97. A practical guide to the use of nickel-containing alloys- Handbook of Welding of Maraging Steels, The Nickel Institute 2002.
98. H. Magnusson, R. Sandstroem: J. Lecomte-Beckers, Q. Contrepois, T. Beck and B. Kuhn, 9th Liege Conference: Materials for Advanced Power Engineering, In Kuhn, Bernd, Germany, 2010.
99. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed. Elsevier ltd, Oxford, 2004, pp. 121–67.10.1016/B978-008044164-1/50009-8 ↗
100. M.F. Giordana, I. Alvarez-Armas, and A. Armas: Steel Res. Int., 2012, vol. 83, pp. 594–99. https://doi.org/10.1002/srin.201100254.10.1002/srin.201100254 ↗