journal article·2024-12Open access

Electrophoretic Deposition and Physicochemical Properties of Ni- and Fe-Doped Cu–Mn Spinel Coatings Enhanced with Ce0.9Y0.1O2 Nanoparticles on Fe16Cr Ferritic Stainless Steel Interconnects for SOEC Applications

Łukasz Mazur, Tomasz Brylewski

Abstract

Abstract Cu- and Mn-based spinel coatings are currently among the most promising materials for solid oxide electrolyzer cell (SOEC) interconnects due to their high electrical conductivity and ability to eliminate environmentally hazardous cobalt, which is included in the most widely used coatings. However, their properties are affected by the presence of the Cr2O3 scale and high-temperature corrosion, and to mitigate this they could be doped with elements such as Ni and Fe. In addition, the electrical properties of such steel/shell layered systems can be further improved using rare-earth element nanoparticles (Ce0.9Y0.1O2). In this work, low-chromium steel was modified using nanoparticles and/or spinel coatings and oxidized in air atmosphere at 800 °C for 2000 hours. The oxidized systems were then characterized using diffraction studies, microstructural observations and electrical measurements. Electrical studies in particular showed a significant reduction in area-specific resistance for steels modified using a combination of both nanoparticles and spinel coatings.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Electrophoretic Deposition in Materials Science · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. F.M. Sapountzi, J. Gracia, C.J. Weststrate, H. Fredriksson, and H. Niemantsverdriet: Prog. Energy Combust. Sci., 2017, vol. 58, pp. 1–35.10.1016/j.pecs.2016.09.001 ↗
2. W.J. Quadakkers, J. Piron-Abellan, V. Shemet, and L. Singheiser: Mater. High Temp., 2003, vol. 20, pp. 115–27.
3. Z. Yang, K.S. Weil, D.M. Paxton, and J.W. Stevenson: J. Electrochem. Soc., 2003, vol. 150, p. A1188.10.1149/1.1595659 ↗
4. J. Molenda, J. Kupecki, R. Baron, M. Blesznowski, G. Brus, T. Brylewski, M. Bucko, J. Chmielowiec, K. Cwieka, M. Gazda, A. Gil, P. Jasinski, Z. Jaworski, J. Karczewski, M. Kawalec, R. Kluczowski, M. Krauz, F. Krok, B. Lukasik, M. Malys, A. Mazur, A. Mielewczyk-Gryn, J. Milewski, S. Molin, G. Mordarski, M. Mosialek, K. Motylinski, E.N. Naumovich, P. Nowak, G. Pasciak, P. Pianko-Oprych, D. Pomykalska, M. Rekas, A. Sciazko, K. Swierczek, J. Szmyd, S. Wachowski, T. Wejrzanowski, W. Wrobel, K. Zagorski, W. Zajac, and A. Zurawska: Int. J. Hydrogen Energy, 2017, vol. 42, pp. 4366–4403.10.1016/j.ijhydene.2016.12.087 ↗
5. VDM ® Crofer 22 APU. Material Datasheet No. 4046, vol. 10, 2010.
6. M.J. Reddy, T.E. Chausson, J.E. Svensson, and J. Froitzheim: Int. J. Hydrogen Energy, 2023, vol. 48, pp. 12893–2904.10.1016/j.ijhydene.2022.11.326 ↗
7. W. Zhang, D. Yan, J. Yang, J. Chen, B. Chi, J. Pu, and J. Li: J. Power Sources, 2014, vol. 271, pp. 25–31.10.1016/j.jpowsour.2014.07.170 ↗
8. J. Zhou, X. Hu, J. Li, and X. Jiang: Int. J. Hydrogen Energy, 2021, vol. 46, pp. 39457–68.10.1016/j.ijhydene.2021.09.167 ↗
9. B. Talic, V. Venkatachalam, P.V. Hendriksen, and R. Kiebach: J. Alloys Compd., 2020, vol. 821, 153229.10.1016/j.jallcom.2019.153229 ↗
10. W.Z. Zhu and S.C. Deevi: Mater. Res. Bull., 2003, vol. 38, pp. 957–72.10.1016/S0025-5408(03)00076-X ↗
11. J.W. Fergus: Mater. Sci. Eng. A, 2005, vol. 397, pp. 271–83.10.1016/j.msea.2005.02.047 ↗
12. K. Hilpert, D. Das, M. Miller, D.H. Peck, and R. Weiß: J. Electrochem. Soc., 1996, vol. 143, pp. 3642–47.10.1149/1.1837264 ↗
13. E. Konysheva, H. Penkalla, E. Wessel, J. Mertens, U. Seeling, L. Singheiser, and K. Hilpert: J. Electrochem. Soc., 2006, vol. 153, p. A765.10.1149/1.2172563 ↗
14. M.H.S. Bidabadi, T. Siripongsakul, T. Thublaor, P. Wiman, and S. Chandra-ambhorn: Surf. Coat. Technol., 2022, vol. 434, 128176.10.1016/j.surfcoat.2022.128176 ↗
15. B. Lemieszek, J. Ignaczak, B. Kamecki, J. Karczewski, M.B. Mogensen, S. Molin, and P. Jasiński: Int. J. Hydrogen Energy, 2022, vol. 47, pp. 33453–65.10.1016/j.ijhydene.2022.07.220 ↗
16. A. Gil, J. Wyrwa, and T. Brylewski: Oxid. Met., 2016, vol. 85, pp. 151–69.10.1007/s11085-015-9605-9 ↗
17. D.E. Alman and P.D. Jablonski: Int. J. Hydrogen Energy, 2007, vol. 32, pp. 3743–53.10.1016/j.ijhydene.2006.08.032 ↗
18. P.F. You, X. Zhang, H.L. Zhang, H.J. Liu, and C.L. Zeng: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 7492–500.10.1016/j.ijhydene.2018.02.178 ↗
19. S. Fontana, R. Amendola, S. Chevalier, P. Piccardo, G. Caboche, M. Viviani, R. Molins, and M. Sennour: J. Power. Sources, 2007, vol. 171, pp. 652–62.10.1016/j.jpowsour.2007.06.255 ↗
20. T. Brylewski, S. Molin, M. Marczyński, Mazur, K. Domaradzki, O. Kryshtal, and A. Gil: Int. J. Hydrogen Energy, 2021, vol. 46, pp. 6775–91.10.1016/j.ijhydene.2020.11.169 ↗
21. S. Molin, H. Persson, T.L. Skafte, A.L. Smitshuysen, S.H. Jensen, K.B. Andersen, H. Xu, M. Chen, and P.V. Hendriksen: J. Power Sources, 2019, vol. 440, 226814.10.1016/j.jpowsour.2019.226814 ↗
22. A. Gil, O. Kryshtal, T. Brylewski, and A. Czyrska-Filemonowicz: Surf. Coat. Technol., 2019, vol. 368, pp. 232–42.10.1016/j.surfcoat.2019.03.081 ↗
23. F. Riffard, H. Buscail, E. Caudron, R. Cueff, C. Issartel, and S. Perrier: J. Mater. Sci., 2002, vol. 37, pp. 3925–33.10.1023/A:1019667825476 ↗
24. R. Cueff, H. Buscail, E. Caudron, F. Riffard, C. Issartel, and S. El Messki: Appl. Surf. Sci., 2004, vol. 229, pp. 233–41.10.1016/j.apsusc.2004.01.072 ↗
25. F. Riffard, H. Buscail, E. Caudron, R. Cueff, C. Issartel, and S. Perrier: Corros. Sci., 2003, vol. 45, pp. 2867–80.10.1016/S0010-938X(03)00114-8 ↗
26. J. Froitzheim, L. Niewolak, M. Brandner, L. Singheiser, and W.J. Quadakkers: J. Fuel Cell Sci. Technol., 2010, vol. 7, pp. 0310201–07.10.1115/1.3182731 ↗
27. R. Sachitanand, M. Sattari, J.E. Svensson, and J. Froitzheim: Fuel Cells, 2016, vol. 16, pp. 32–38.10.1002/fuce.201500066 ↗
28. K. Schmale, M. Daniels, A. Buchheit, M. Grünebaum, L. Haase, S. Koops, and H.-D. Wiemhöfer: J. Electrochem. Soc., 2013, vol. 160, pp. F1081-1087.10.1149/2.119309jes ↗
29. D. Szymczewska, S. Molin, M. Chen, P. Vang Hendriksen, and P. Jasinski: Procedia Eng., 2014, vol. 98, pp. 93–100.10.1016/j.proeng.2014.12.493 ↗
30. B. Talic, H. Falk-Windisch, V. Venkatachalam, P.V. Hendriksen, K. Wiik, and H.L. Lein: J. Power Sources, 2017, vol. 354, pp. 57–67.10.1016/j.jpowsour.2017.04.023 ↗
31. B. Talic, S. Molin, K. Wiik, P.V. Hendriksen, and H.L. Lein: J. Power Sources, 2017, vol. 372, pp. 145–56.10.1016/j.jpowsour.2017.10.060 ↗
32. S. Molin, P. Jasinski, L. Mikkelsen, W. Zhang, M. Chen, and P.V. Hendriksen: J. Power Sources, 2016, vol. 336, pp. 408–18.10.1016/j.jpowsour.2016.11.011 ↗
33. J. Froitzheim, S. Canovic, M. Nikumaa, R. Sachitanand, L.G. Johansson, and J.E. Svensson: J. Power Sources, 2012, vol. 220, pp. 217–27.10.1016/j.jpowsour.2012.06.092 ↗
34. S. Molin, A.G. Sabato, H. Javed, G. Cempura, A.R. Boccaccini, and F. Smeacetto: Mater. Lett., 2018, vol. 218, pp. 329–33.10.1016/j.matlet.2018.02.037 ↗
35. I. Thaheem, D.W. Joh, T. Noh, and K.T. Lee: Int. J. Hydrogen Energy, 2019, vol. 44, pp. 4293–4303.10.1016/j.ijhydene.2018.12.173 ↗
36. H.P. Tseng, T.Y. Yung, C.K. Liu, Y.N. Cheng, and R.Y. Lee: Int. J. Hydrogen Energy, 2020, vol. 45, pp. 12555–64.10.1016/j.ijhydene.2020.02.178 ↗
37. A. Petric and H. Ling: J. Am. Ceram. Soc., 2007, vol. 90, pp. 1515–20.10.1111/j.1551-2916.2007.01522.x ↗
38. J. Ignaczak, Y. Naumovich, K. Górnicka, J. Jamroz, W. Wróbel, J. Karczewski, M. Chen, P. Jasiński, and S. Molin: J. Eur. Ceram. Soc., 2020, vol. 40, pp. 5920–29.10.1016/j.jeurceramsoc.2020.07.001 ↗
39. Ł Mazur, D. Koszelow, M. Zajusz, M. Łapiński, M. Bik, P. Zając, A. Adamczyk, P. Rutkowski, S. Molin, and T. Brylewski: J. Eur. Ceram. Soc., 2023, vol. 43, pp. 5557–74.10.1016/j.jeurceramsoc.2023.05.015 ↗
40. N.S. Waluyo, B.K. Park, S.B. Lee, T.H. Lim, S.J. Park, R.H. Song, and J.W. Lee: J. Solid State Electrochem., 2014, vol. 18, pp. 445–52.10.1007/s10008-013-2245-6 ↗
41. X. Chen, P.Y. Hou, C.P. Jacobson, S.J. Visco, and L.C. De Jonghe: Solid State Ionics, 2005, vol. 176, pp. 425–33.10.1016/j.ssi.2004.10.004 ↗
42. Y. Jin, W. Hao, M. Guo, M. Yu, Y. Guo, X. Liu, Z. Yang, B. Ge, Z. Lei, X. Xiong, and S. Peng: Ceram. Int., 2023, vol. 49, pp. 27716–23.10.1016/j.ceramint.2023.04.102 ↗
43. M.J. Reddy, B. Kamecki, B. Talic, E. Zanchi, F. Smeacetto, J.S. Hardy, J.P. Choi, L. Mazur, R. Vasßen, S.N. Basu, T. Brylewski, J.E. Svensson, and J. Froitzheim: J. Power Sources, 2023, https://doi.org/10.1016/j.jpowsour.2023.232831.10.1016/j.jpowsour.2023.232831 ↗
44. Z. Zhu, C. Darl-Uzu, U. Pal, S. Gopalan, A.M. Hussain, N. Dale, Y. Fukuyama, Y. Miura, Y. Miyoshi, and S. Basu: Int. J. Hydrogen Energy, 2022, vol. 47, pp. 36953–63.10.1016/j.ijhydene.2022.08.239 ↗
45. S. Joshi and A. Petric: Int. J. Hydrogen Energy, 2017, vol. 42, pp. 5584–89.10.1016/j.ijhydene.2016.08.075 ↗
46. J. Ignaczak, L. Zeng, D.F. Sanchez, M. Makowska, K. Górnicka, K. Lankauf, J. Karczewski, P. Jasiński, and S. Molin: Int. J. Hydrogen Energy, 2023, vol. 48, pp. 36076–93.10.1016/j.ijhydene.2023.06.041 ↗
47. Z. Yang, G.G. Xia, G.D. Maupin, and J.W. Stevenson: Surf. Coat. Technol., 2006, vol. 201, pp. 4476–83.10.1016/j.surfcoat.2006.08.082 ↗
48. Y. Fang, C. Wu, X. Duan, S. Wang, and Y. Chen: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 5611–16.10.1016/j.ijhydene.2011.01.130 ↗
49. T. Brylewski, J. Dabek, K. Przybylski, J. Morgiel, and M. Rekas: J. Power Sources, 2012, vol. 208, pp. 86–95.10.1016/j.jpowsour.2012.02.015 ↗
50. A. Kruk, M. Stygar, and T. Brylewski: J. Solid State Electrochem., 2013, vol. 17, pp. 993–1003.10.1007/s10008-012-1952-8 ↗
51. H. Zhu, J. Zhang, and W. Cao: Int. J. Hydrogen Energy, 2024, vol. 50, pp. 977–91.10.1016/j.ijhydene.2023.09.242 ↗
52. S. Molin: Int. J. Appl. Ceram. Technol., 2018, vol. 15, pp. 349–60.10.1111/ijac.12816 ↗
53. A. Mosavi and H. Ebrahimifar: Int. J. Hydrogen Energy, 2020, vol. 45, pp. 3145–62.10.1016/j.ijhydene.2019.11.183 ↗
54. E. Zanchi, J. Ignaczak, S. Molin, G. Cempura, A.R. Boccaccini, and F. Smeacetto: J. Eur. Ceram. Soc., 2022, vol. 42(7), pp. 3271–81.10.1016/j.jeurceramsoc.2022.02.008 ↗
55. E. Zanchi, A.G. Sabato, S. Molin, G. Cempura, A.R. Boccaccini, and F. Smeacetto: Mater. Lett., 2021, vol. 286, 129229.10.1016/j.matlet.2020.129229 ↗
56. M. Bobruk, S. Molin, M. Chen, T. Brylewski, and P.V. Hendriksen: Mater. Lett., 2018, vol. 213, pp. 394–98.10.1016/j.matlet.2017.12.046 ↗
57. H. Abdoli, S. Molin, and H. Farnoush: Mater. Lett., 2020, vol. 259, 126898.10.1016/j.matlet.2019.126898 ↗
58. Ł Mazur, J. Ignaczak, M. Bik, S. Molin, M. Sitarz, A. Gil, and T. Brylewski: Int. J. Hydrogen Energy, 2022, vol. 47, pp. 6295–311.10.1016/j.ijhydene.2021.11.256 ↗
59. B. Lemieszek, J. Ignaczak, K. Lankauf, P. Błaszczak, M. Bik, M. Zając, M. Sitarz, P. Jasiński, and S. Molin: J. Eur. Ceram. Soc., 2024, vol. 44, 116743.10.1016/j.jeurceramsoc.2024.116743 ↗
60. B. Wang, K. Li, J. Liu, T. Zhang, T. Yang, and N. Zhang: Int. J. Hydrogen Energy, 2024, vol. 61, pp. 216–25.10.1016/j.ijhydene.2024.02.198 ↗
61. N. Hosseini, F. Karimzadeh, M.H. Abbasi, and G.M. Choi: J. Alloys Compd., 2016, vol. 673, pp. 249–57.10.1016/j.jallcom.2016.02.249 ↗
62. K. Domaradzki, Ł Mazur, M. Zajusz, M. Bik, P. Rutkowski, M. Rękas, J. Cieślak, and T. Brylewski: J. Eur. Ceram. Soc., 2024, vol. 44, pp. 7103–119.10.1016/j.jeurceramsoc.2024.05.019 ↗
63. G. Kerkhoff. (n.d.). Material Data Sheet, Ferritic corrosion resisting steel, 1–4.
64. Ł Mazur, K. Domaradzki, P. Winiarski, Ł Zych, and T. Brylewski: Ceram. Int., 2024, vol. 50, pp. 34017–26.10.1016/j.ceramint.2024.06.221 ↗
65. K. Okuyama and W.W. Lenggoro: Chem. Eng. Sci., 2003, vol. 58, pp. 537–47.10.1016/S0009-2509(02)00578-X ↗
66. S. Mrowec: An Introduction to the Theory of Metal Oxidation, National Bureau of Standards and National Science Foundation, Washington, DC, 1982.
67. M. Bobruk, K. Durczak, J. Dąbek, and T. Brylewski: J. Mater. Eng. Perform., 2017, vol. 26, pp. 1598–604.10.1007/s11665-017-2588-8 ↗
68. Z. Sun, S. Gopalan, U.B. Pal, S.N. Basu: Electrophoretically Deposited Copper Manganese Spinel Coatings for Prevention of Chromium Poisoning in Solid Oxide Fuel Cells, Springer, Minerals, Metals and Materials Series, 2019, pp. 265–72.10.1007/978-3-030-06209-5_27 ↗
69. A. Navrotsky and O.J. Kleppa: J. Inorg. Nucl. Chem., 1967, vol. 29, pp. 2701–714.10.1016/0022-1902(67)80008-3 ↗
70. H. Zhu, S. Geng, G. Chen, and F. Wang: Corros. Sci., 2022, vol. 194, 109932.10.1016/j.corsci.2021.109932 ↗
71. Y. Zhang, Y. Zhang, C. Wu, Y. Yang, Q. Li, and Y. Chen: Ceram. Int., 2022, vol. 48, pp. 9550–57.10.1016/j.ceramint.2021.12.153 ↗
72. T.C. Kaspar, P.V. Sushko, M.E. Bowden, S.M. Heald, A. Papadogianni, C. Tschammer, O. Bierwagen, and S.A. Chambers: Phys. Rev. B, 2016, vol. 94, pp. 1–2.10.1103/PhysRevB.94.155409 ↗
73. S. Ishikawa, K. Shoji, and N. Amano: Trans. Jpn. Inst. Met., 1985, vol. 26(10), pp. 753–62.10.2320/matertrans1960.26.753 ↗
74. R. Thanneeru: Vacancy Engineered Doped And Undoped Nanocrystalline Rare Earth Oxide Particles For High Temperature Oxidation Resistant Coating, Doctoral Thesis, University of Central Florida, 2007.