Microstructural Evolution During Welding of High Si Solution-Strengthened Ferritic Ductile Cast Iron Using Different Filler Metals
Source abstract
Abstract
Abstract The paper deals in depth with characterizing bead-on-plate welds on EN-GJS-500-14 base metal, utilizing two filler metals: a pure Ni wire and a NiFe wire containing 45 wt pct Ni. The welds were conducted using the same heat input to ensure comparability in microstructure analysis. The microstructural observations were carried out using optical and scanning electron microscopies, X-ray tomography, X-ray diffraction analysis, and microhardness testing. Thermodynamic simulations using the non-equilibrium Scheil solidification model provide insights into the solidification process and the underlying metallurgical factors associated with the observed microstructural evolution. The observations revealed that the pure Ni wire deposited a softer fusion zone with graphite precipitation, while cementite precipitated in the fusion zone of NiFe alloy. The formation of martensite structures with different morphologies was the predominant microstructural evolution in the heat-affected zone of both welds. The partially melted zone of the pure Ni weld is narrower than the NiFe weld because more diffusion of Ni avoids widening the brittle structures in the partially melted zone. An unmixed zone in the form of a peninsula was exclusively observed in the fusion zone of the NiFe weld because of inadequate diffusion of Ni into the liquified materials along the fusion boundary.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Y.B. Zhang, T. Andriollo, S. Fæster, R. Barabash, R. Xu, N. Tiedje, J. Thorborg, J. Hattel, D. Juul Jensen, and N. Hansen: Acta Mater., 2019, vol. 167, pp. 221–30.10.1016/j.actamat.2019.01.038 ↗
2. N.S. Tiedje: Mater. Sci. Technol., 2010, vol. 26, pp. 505–14.10.1179/026708310X12668415533649 ↗
3. M. Shirani and G. Härkegård: Eng. Fail. Anal., 2010, https://doi.org/10.1016/j.engfailanal.2010.07.001.10.1016/j.engfailanal.2010.07.001 ↗
4. K.M. Pedersen and N.S. Tiedje: Mater Charact, 2008, vol. 59, pp. 1111–21.10.1016/j.matchar.2007.09.001 ↗
5. C.M. Lin, A.S. Chandra, L. Morales-Rivas, S.Y. Huang, H.C. Wu, Y.E. Wu, and H.L. Tsai: Int. J. Cast Met. Res., 2014, vol. 27, pp. 378–83.10.1179/1743133614Y.0000000126 ↗
6. F. Malek Ghaini, M. Ebrahimnia, and S. Gholizade: Eng. Fail. Anal., 2011, vol. 18, pp. 47–51.10.1016/j.engfailanal.2010.08.002 ↗
7. S. Kou: Welding Metallurgy, 2nd ed. Wiley, New Jersey, 2003.
8. N. Sommer and S. Böhm: J. Adv. Join. Process., 2022, vol. 5, p. 100078.10.1016/j.jajp.2021.100078 ↗
9. Z. Weng, A. Wang, Y. Wang, D. Xiong, and H. Tang: Surf. Coat. Technol., 2016, vol. 286, pp. 64–71.10.1016/j.surfcoat.2015.12.031 ↗
10. Y. Li, S. Dong, S. Yan, P. He, and B. Xu: Surf. Coat. Technol., 2018, vol. 339, pp. 37–47.10.1016/j.surfcoat.2018.02.011 ↗
11. E.M. El-Banna: Mater. Lett., 1999, vol. 41, pp. 20–26.10.1016/S0167-577X(99)00098-1 ↗
12. R.C. Voigt and C.R. Loper: Weld. J., 1983, vol. 62, p. 82.
13. E.S.V. Marques, F.J.G. Silva, O.C. Paiva, and A.B. Pereira: Materials, 2019, https://doi.org/10.3390/ma12142263.10.3390/ma12142263 ↗
14. E.M. El-Banna, M.S. Nageda, and M.M. Abo El-Saadat: Mater. Lett., 2000, vol. 42, pp. 311–20.10.1016/S0167-577X(99)00204-9 ↗
15. M. Pascual, J. Cembrero, F. Salas, and M.P. Martínez: Mater. Lett., 2008, vol. 62, pp. 1359–62.10.1016/j.matlet.2007.08.070 ↗
16. M. Pouranvari: Mater. Des., 2010, vol. 31, pp. 3253–58.10.1016/j.matdes.2010.02.034 ↗
17. T. Suzuki, S. Hiratsuka, H. Horie, S. Moriya, and M. Nakamura: J. Jpn. Found. Eng. Soc., 2005, vol. 77, pp. 314–19.
18. M. Ebrahimnia, F.M. Ghaini, S. Gholizade, and M. Salari: Mater. Des., 2012, vol. 33, pp. 551–56.10.1016/j.matdes.2011.04.063 ↗
19. M. Zuk, J. Górka, R. Dojka, and A. Czupryński: in IOP Conference Series: Materials Science and Engineering, vol. 227, Institute of Physics Publishing, 2017.10.1088/1757-899X/227/1/012139 ↗
20. Z. Lestan, M. Milfelner, J. Balic, M. Brezocnik, and I. Karabegovic: Int. J. Adv. Manuf. Technol., 2013, vol. 66, pp. 2023–28.10.1007/s00170-012-4478-4 ↗
21. M. Askari-Paykani, M. Shayan, and M. Shamanian: J. Iron Steel Res. Int., 2014, pp. 252–63.10.1016/S1006-706X(14)60039-X ↗
22. D. Franzen, K. Weiß, J. Gundlach, and A. Bührig-Polaczek: Int. J. Metalcast., 2020, vol. 14, pp. 1041–51.10.1007/s40962-020-00406-5 ↗
23. T. Ikeda, T. Umetani, N. Kai, N.A. Noda, and Y. Sano: ISIJ Int., 2016, vol. 56, pp. 868–74.10.2355/isijinternational.ISIJINT-2015-516 ↗
24. DIN EN 1563:2012 “Founding–Spheroidal graphite cast irons”, 2012.
25. D. Franzen, P. Weiß, B. Pustal, and A. Bührig-Polaczek: Int. J. Metalcast., 2020, vol. 14, pp. 1105–14.10.1007/s40962-020-00412-7 ↗
26. W. Menk: Materials Science Forum, vol. 925, Trans Tech Publications Ltd, MSF, 2018, pp. 224–30.
27. T. Umetani, H. Takada, T. Ikeda, T. Yamaguchi, H. Era, and K. Nishio: Weld. Int., 2015, vol. 29, pp. 342–48.10.1080/09507116.2014.921063 ↗
28. M. Riebisch, P. Weiß, C. Cremer, I. Aboulkhair, and A. Bührig-Polaczek: Mater. Sci. Technol., 2018, vol. 34, pp. 725–30.10.1080/02670836.2017.1410952 ↗
29. E.B. Farahani, A. Sarhadi, M. Alizadeh-Sh, S. Fæster, H.K. Danielsen, and M.A. Eder: J. Manuf. Process., 2023, vol. 104, pp. 443–59.10.1016/j.jmapro.2023.08.059 ↗
30. N.Q. Trinh, S. Tashiro, T. Suga, T. Kakizaki, K. Yamazaki, A. Lersvanichkool, H. Van Bui, and M. Tanaka: Metals (Basel), 2022, https://doi.org/10.3390/met12101577.10.3390/met12101577 ↗
31. S. Kotsakis and K. Drosos: Chalmers University of Technology, 2014.
32. É.M. Miná, Y.C. da Silva, J. Dille, and C.C. Silva: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 6138–47.10.1007/s11661-016-3786-y ↗
33. M. Alizadeh-Sh, S.P.H. Marashi, E. Ranjbarnodeh, R. Shoja-Razavi, and J.P. Oliveira: Opt. Laser Technol., 2020, vol. 128, p. 106244.10.1016/j.optlastec.2020.106244 ↗
34. L.A. Feldkamp, L.C. Davis, and J.W. Kress: Practical Cone-Beam Algorithm, vol. 1, 1984.10.1364/JOSAA.1.000612 ↗
35. A. Joseph, D. Farson, D. Harwig, and R. Richardson: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 311–18.10.1179/174329305X40624 ↗
36. R. Zong, J. Chen, and C. Wu: J. Mater. Process. Technol., 2020, https://doi.org/10.1016/j.jmatprotec.2020.116781.10.1016/j.jmatprotec.2020.116781 ↗
37. B. Mvola and P. Kah: Int. J. Adv. Manuf. Technol., 2017, vol. 88, p. 88.10.1007/s00170-016-8936-2 ↗
38. B. Silwal, A. Nycz, C.J. Masuo, M.W. Noakes, D. Marsh, and D. Vaughan: Int. J. Adv. Manuf. Technol., 2020, vol. 108, pp. 1285–96.10.1007/s00170-020-05395-7 ↗
39. L.L. Wang, F.G. Lu, H.P. Wang, A.B. Murphy, and X.H. Tang: J. Phys. D Appl. Phys., 2014, https://doi.org/10.1088/0022-3727/47/46/465202.10.1088/0022-3727/47/46/465202 ↗
40. P. Magnin and W. Kurz: Metall. Trans. A, 1988, vol. 19, pp. 1965–71.10.1007/BF02645200 ↗
41. ASM Handbook: in Alloy Phase Diagram, vol. 3, ASM International, 2004.
42. L. Battezzati, M. Baricco, and S. Curiotto: Acta Mater., 2005, vol. 53, pp. 1849–56.10.1016/j.actamat.2004.12.035 ↗
43. P. Magnin and W. Kurz: Metall. Trans. A, 1988, vol. 19, pp. 1955–63.10.1007/BF02645199 ↗
44. S. Itomura, K. Heshiki, F. Matsuda, and Y. Kikuta: Weld. Int., 1989, vol. 3, pp. 872–77.10.1080/09507118909446676 ↗
45. T. Maki: in Phase Transformations in Steels, Elsevier, 2012, pp. 34–58.10.1533/9780857096111.1.34 ↗
46. M. Alizadeh-Sh, S.P.H. Marashi, E. Ranjbarnodeh, R. Shoja-Razavi, and J.P. Oliveira: J. Laser Appl., 2020, vol. 32, p. 022048.10.2351/1.5124932 ↗
47. T. Soysal, S. Kou, D. Tat, and T. Pasang: Acta Mater., 2016, vol. 110, pp. 149–60.10.1016/j.actamat.2016.03.004 ↗
48. S. Kou and Y.K. Yang: Weld. J., 2007, vol. 86, p. 303.