Misorientation Development at Σ3 Boundaries in Pure Copper: Experiments and MD Simulations
Source abstract
Abstract
During deformation of bulk polycrystalline materials, misorientation develops due to plastic deformation within grains and additionally due to mismatch in the deformation of adjacent grains across grain boundaries. We have carried out incremental deformation of pure copper and studied misorientation development (Kernel Average Misorientation, KAM) near specific boundaries as a function of strain based on Electron Backscatter Diffraction (EBSD) measurements. To analyse misorientation variation within grains and near boundaries, we propose a novel method, section partitioning, which gives more representative measurements of misorientation as a function of distance from grain boundary. We find three kinds of behaviour near boundaries in terms of KAM: (i) lower than, (ii) intermediate between and (iii) higher than in-grain sections on either side of boundary. We also show that Grain Reference Orientation Deviation shows the best correlation with changes in the boundary character that occur as a result of deformation. Further we have performed molecular dynamics (MD) simulations of deformation of twinned crystals of copper. These results are used to qualitatively understand the misorientation development that we see in deformed samples. Our results highlight that similar Σ3 boundaries could show differences in misorientation development after deformation—and these are related to variations in dislocation boundary interactions. These results suggest that models for polycrystal deformation must incorporate such heterogeneous behaviour of boundaries. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. K. Konopka, J. Mizera, and J.W. Wyrzykowski: J. Mater. Process. Technol., 2000, vol. 99, pp. 255–59.10.1016/S0924-0136(99)00434-3 ↗
2. X. Zhang, A. Mishra, H. Wang, M. Nastasi, J.D. Embury, T.E. Mitchell, R.G. Hoagland, and J.P. Hirth: Appl. Phys. Lett., 2004, vol. 84, pp. 1096–98.10.1063/1.1647690 ↗
3. Y.G. Zheng, J. Lu, H.W. Zhang, and Z. Chen: Scr. Mater., 2009, vol. 60, pp. 508–11.10.1016/j.scriptamat.2008.11.039 ↗
4. A.J. Cao, Y.G. Wei, and S.X. Mao: Appl. Phys. Lett., 2007, vol. 90, pp. 1–4.
5. K.A. Afanasyev and F. Sansoz: Nano. Lett., 2007, vol. 7, pp. 2056–62.10.1021/nl070959l ↗
6. Y.B. Wang, B. Wu, and M.L. Sui: Appl. Phys. Lett., 2008, vol. 93, pp. 1–4.
7. W.A.T. Clark, C.E. Wise, Z. Shen, and R.H. Wagoner: Ultramicroscopy, 1989, vol. 30, pp. 76–89.10.1016/0304-3991(89)90175-7 ↗
8. J. Kacher, B.P. Eftink, B. Cui, and I.M. Robertson: Curr. Opin. Solid State Mater. Sci., 2014, vol. 18, pp. 227–43.10.1016/j.cossms.2014.05.004 ↗
9. T. Malis and K. Tangri: Acta Metall., 1979, vol. 27, pp. 25–32.10.1016/0001-6160(79)90053-1 ↗
10. J. Jiang, T.B. Britton, and A.J. Wilkinson: Acta Mater., 2013, vol. 61, pp. 7227–39.10.1016/j.actamat.2013.08.027 ↗
11. J. Jiang, T.B. Britton, and A.J. Wilkinson: Philos. Mag. Lett., 2012, vol. 92, pp. 580–88.10.1080/09500839.2012.700412 ↗
12. R.K. Davies and V. Randle: Mater. Sci. Eng. A, 2000, vol. 283, pp. 251–65.10.1016/S0921-5093(00)00618-3 ↗
13. M. Kamaya, J.Q. da Fonseca, L.M. Li, and M. Preuss: Appl. Mech. Mater., 2007, vol. 7, pp. 173–79.10.4028/www.scientific.net/AMM.7-8.173 ↗
14. S. Subedi, R. Pokharel, and A.D. Rollett: Mater. Sci. Eng. A, 2015, vol. 638, pp. 348–56.10.1016/j.msea.2015.04.051 ↗
15. S. Scheriau and R. Pippan: Mater. Sci. Eng. A, 2008, vol. 493, pp. 48–52.10.1016/j.msea.2007.08.092 ↗
16. A.K. Veneva, M.R. Koblischka, X.L. Zeng, J. Schmauch, and U. Hartmann: J. Phys., 2018, vol. 1054, pp. 1–8.
17. B. Wu, A. Heidelberg, and J.J. Boland: Nat. Mater., 2005, vol. 4, pp. 525–29.10.1038/nmat1403 ↗
18. A. Cao, Y. Wei, and E. Ma: Phys. Rev. B, 2008, vol. 77, pp. 1–8.
19. H.D. Espinosa, B.C. Prorok, and B. Peng: J. Mech. Phys. Solids, 2004, vol. 52, pp. 667–89.10.1016/j.jmps.2003.07.001 ↗
20. G. Dehm, T.J. Balk, H. Edongué, and E. Arzt: Microelectron. Eng., 2003, vol. 70, pp. 412–24.10.1016/S0167-9317(03)00395-2 ↗
21. L. Nicola, Y. Xiang, J.J. Vlassak, E. van der Giessen, and A. Needleman: J. Mech. Phys. Solids, 2006, vol. 54, pp. 2089–110.10.1016/j.jmps.2006.04.005 ↗
22. P.J. Imrich, C. Kirchlechner, C. Motz, and G. Dehm: Acta Mater., 2014, vol. 73, pp. 240–50.10.1016/j.actamat.2014.04.022 ↗
23. N.K. Aragon, J.D. Gravell, and I. Ryu: Acta Mater., 2022, vol. 223, pp. 1–21.10.1016/j.actamat.2021.117455 ↗
24. P.J. Imrich, C. Kirchlechner, and G. Dehm: Mater. Sci. Eng. A, 2015, vol. 642, pp. 65–70.10.1016/j.msea.2015.06.064 ↗
25. N. Kheradmand, H. Vehoff, and A. Barnoush: Acta Mater., 2013, vol. 61, pp. 7454–65.10.1016/j.actamat.2013.08.056 ↗
26. S. Zaefferer, J. Kuo, Z. Zhao, M. Winning, and D. Raabe: Acta Mater., 2003, vol. 51, pp. 4719–35.10.1016/S1359-6454(03)00259-3 ↗
27. N.A. Bonasso, F. Wagner, S. Berbenni, and D.P. Field: Mater. Sci. Eng. A, 2012, vol. 548, pp. 56–63.10.1016/j.msea.2012.03.068 ↗
28. X. Zhao, C. Lu, A.K. Tieu, L. Pie, L. Zhang, L. Su, and L. Zhan: Mater. Sci. Eng. A, 2017, vol. 687, pp. 343–51.10.1016/j.msea.2016.12.061 ↗
29. X.X. Zhao, J. Wu, Y.L. Chiu, I.P. Jones, R. Gu, and A.H.W. Ngan: Scr. Mater., 2019, vol. 163, pp. 137–41.10.1016/j.scriptamat.2019.01.020 ↗
30. C. Howard, D. Frazer, A. Lupinacci, S. Parker, R.Z. Valiev, C. Shin, B.W. Choi, and P. Hosemann: Mater. Sci. Eng. A, 2016, vol. 649, pp. 104–13.10.1016/j.msea.2015.09.110 ↗
31. L.L. Li, Z.J. Zhang, J. Tan, C.B. Jiang, R.T. Qu, P. Zhang, J.B. Yang, and Z.F. Zhang: Sci. Rep., 2015, vol. 5, pp. 1–8.
32. J. Guo, S. Amira, P. Gougeon, and X.G. Chen: Mater. Charact., 2011, vol. 62, pp. 865–77.10.1016/j.matchar.2011.06.007 ↗
33. V. Randle, N. Hansen, and D.J. Jensen: Philos. Mag. A, 1996, vol. 73, pp. 265–82.10.1080/01418619608244382 ↗
34. N.I. Thiruselvam, R. Jeyaraam, S.J. Subramanian, and S. Sankaran: Materials, 2021, vol. 18, pp. 1–8.
35. I. Ryu, W.D. Nix, and W. Cai: Acta. Mater., 2013, vol. 61, pp. 3233–41.10.1016/j.actamat.2013.02.011 ↗
36. M.M. Nowell and S.I. Wright: Ultramicroscopy, 2005, vol. 103, pp. 41–58.10.1016/j.ultramic.2004.11.012 ↗
37. N.P. Kryuchkov, S.O. Yurchenko, Y.D. Fomin, E.N. Tsiok, and V.N. Ryzhov: Soft Matter, 2018, vol. 14, pp. 2152–62.10.1039/C7SM02429K ↗
38. A. Stukowski: Model. Simul Mat. Sci. Eng., 2010, vol. 18, pp. 1–8.
39. L. Ward, A. Agrawal, K. M. Flores, and W. Windl: arXiv:1209.0619, 2012, pp. 1–26.
40. G. Kamalakshi, P. Pant, and M.P. Gururajan: Comput. Mater. Sci., 2022, vol. 203, pp. 1–1.10.1016/j.commatsci.2021.111087 ↗
41. M.N. Gussev and K.J. Leonard: J. Nucl. Mater., 2019, vol. 517, pp. 45–56.10.1016/j.jnucmat.2019.01.034 ↗
42. C. Schayes, J. Bouquerel, J.B. Vogt, F. Palleschi, and S. Zaefferer: Mater. Charact., 2016, vol. 115, pp. 61–70.10.1016/j.matchar.2016.03.020 ↗
43. S.I. Wright, S. Suzuki, and M.M. Nowell: JOM, 2016, vol. 68, pp. 2730–36.10.1007/s11837-016-2084-x ↗
44. K. Fujiyama, K. Mori, D. Kaneko, H. Kimachi, T. Saito, R. Ishii, and T. Hino: Int. J. Pres. Ves. Pip., 2009, vol. 86, pp. 570–7.10.1016/j.ijpvp.2009.04.011 ↗
45. L. Hua, X. Hu, and X. Han: Mater. Des., 2020, vol. 196, pp. 1–26.10.1016/j.matdes.2020.109192 ↗
46. J. Wang, G. Chen, S. Huang, H. Zhang, Q. Chen, C. Zhang, and Z. Du: Int. J. Mech. Sci., 2022, vol. 218, pp. 1–2.10.1016/j.ijmecsci.2022.107069 ↗
47. Z. Li, Y.C. Lin, L. Zhang, J. Zheng, J. Zhao, R. Wang, and Z. Jiang: Int. J. Mech. Sci., 2022, vol. 231, pp. 1–1.
48. S.V. Boxel, M. Seefeldt, B. Verlinden, and P.V. Houtte: Mater. Sci. Forum, 2005, vol. 495, pp. 1025–30.10.4028/www.scientific.net/MSF.495-497.1025 ↗
49. Y. Wadamori, K. Hirayama, H. Fujiwara, T. Uenoya, and H. Miyamoto: J. Jpn. I. Met. Mater., 2013, vol. 77, pp. 348–52.
50. Y. Takayama and J.A. Szpunar: Mater. Trans., 2004, vol. 45, pp. 2316–25.10.2320/matertrans.45.2316 ↗
51. S.I. Wright, M.M. Nowell, and D.P. Field: Microsc. Microanal., 2011, vol. 17, pp. 316–29.10.1017/S1431927611000055 ↗
52. A. Kundu, D.P. Field, and P.C. Chakraborti: Mater. Sci. Eng. A, 2020, vol. 773, pp. 2–11.10.1016/j.msea.2019.138854 ↗
53. D.N. Githinji, S.M. Northover, P.J. Bouchard, and M.A. Rist: Metall. Mater. Trans. A, 2013, vol. 44, pp. 4150–67.10.1007/s11661-013-1787-7 ↗
54. Y. Kim, P.A. Rad, J. Lee, G.H. Gu, M. Jang, O. Bouaziz, Y. Estrin, H. Kato, and H.S. Kim: Mater. Sci. Eng. A, 2022, vol. 835, pp. 1–6.
55. M. Kamaya: Mater. Charact., 2012, vol. 66, pp. 56–67.10.1016/j.matchar.2012.02.001 ↗
56. M. Kamaya, K. Kubushiro, Y. Sakakibara, S. Suzuki, H. Morita, R. Yoda, D. Kobayashi, K. Yamagiwa, T. Nishiyoka, Y. Yamazaki, Y. Kamada, T. Hanada, and T. Ohtani: Mech. Eng. J., 2016, vol. 3, pp. 1–5.
57. A. Ma, F. Roters, and D. Raabe: Acta Mater., 2006, vol. 54, pp. 2181–94.10.1016/j.actamat.2006.01.004 ↗
58. A. Ma, F. Roters, and D. Raabe: Int. J. Solids Struct., 2006, vol. 43(24), pp. 7287–303.10.1016/j.ijsolstr.2006.07.006 ↗
59. N. Pai, A. Prakash, I. Samajdar, and A. Patra: Int. J. Plast., 2022, vol. 156, 103360.10.1016/j.ijplas.2022.103360 ↗
60. Z. Shen, R.H. Wagoner, and W.A.T. Clark: Scr. Metall., 1986, vol. 20, pp. 921–26.10.1016/0036-9748(86)90467-9 ↗
61. M. Chassagne, M. Legros, and D. Rodney: Acta Mater., 2011, vol. 59, pp. 1456–63.10.1016/j.actamat.2010.11.007 ↗
62. C.M. Kuo and C.S. Lin: Scr. Mater., 2007, vol. 57, pp. 667–70.10.1016/j.scriptamat.2007.06.054 ↗
63. A. Rohatgi, K.S. Vecchio, and G.T. Gray: Metall. Mater. Trans. A, 2001, vol. 32, pp. 135–45.10.1007/s11661-001-0109-7 ↗