journal article·2023-02

Advanced Characterization of Precipitation and Microstructure Heterogeneity in X70 Steel

Chen Gu, Michael J. Gaudet, Jing Su, Brian Langelier, Hui Yuan, Nabil Bassim, Hatem Zurob

Publisher page

Abstract

The spatial distribution of precipitates and microstructure heterogeneity in a vacuum induction melted X70 steel rolled at a pilot-scale facility were investigated using advanced characterization techniques. Electron Backscatter Diffraction was used to identify areas with low and high Kernel Average Misorientation (KAM). A newly developed procedure utilizing a Plasma Focused Ion Beam microscope was used to lift-out plane view sections of small and large grains within the areas of low and high KAM values. Quantitative analysis by transmission electron microscopy (TEM) revealed a uniformly dispersed set of core-cap structure precipitates varying between 30 and 70 nm in diameter. The core was enriched in Ti and N, while the shell typically contained Nb and C. Strain-induced precipitation of fine (5 to 20 nm) NbC particles on dislocations was not observed by TEM and 3D atom probe tomography (APT). The absence of strain-induced precipitation is believed to be due to the depletion of Nb from solid solution as the result of the core-cap structure of NbC on pre-existing TiN particles. The similarity of precipitates in each location suggests that the local features (strain, grain size) in the final microstructure arise from phase transformations during cooling.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. T. Gladman: The Physical Metallurgy of Microalloyed Steels, 1st ed. Maney for the Institute of Materials, Abington, 1997, pp. 1–6.
2. A.T. Davenport, L.C. Brossard, and R.E. Miner: JOM, 1975, vol. 27, pp. 21–27.10.1007/BF03355951 ↗
3. M. Charleux, W.J. Poole, M. Militzer, and A. Deschamps: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1635–47.10.1007/s11661-001-0142-6 ↗
4. D.B. Rosado, W.D. Waele, D. Vanderschueren, S. Hertelé, in 5th International Conference on Sustainable Construction and Design, vol. 4 (2013)
5. V.M.H. Konstrukcijska: Mater. Tehnol., 2011, vol. 45, pp. 295–301.
6. H.J. Kong and C.H. Liu: Technologies, 2018, vol. 6, p. 36.10.3390/technologies6010036 ↗
7. C. Klinkenberg, K. Hulka, and W. Bleck: Steel Res. Int., 2004, vol. 75, pp. 744–52.10.1002/srin.200405837 ↗
8. S.L. Liang, X. Wang, C. Andrei, and H.S. Zurob: Mater. Sci. Eng. A, 2021, vol. 802, 140447.10.1016/j.msea.2020.140447 ↗
9. S.L. Liang, X. Wang, and H.S. Zurob: Mater. Sci. Eng. A, 2020, vol. 772, 138748.10.1016/j.msea.2019.138748 ↗
10. B. Dutta, E.J. Palmiere, and C.M. Sellars: Acta Mater., 2001, vol. 49, pp. 785–94.10.1016/S1359-6454(00)00389-X ↗
11. P. Gong, E.J. Palmiere, and W. Mark Rainforth: Mater. Charact., 2017, vol. 124, pp. 83–89.10.1016/j.matchar.2016.12.009 ↗
12. D. Poddar, P. Cizek, H. Beladi, and P.D. Hodgson: Acta Mater., 2014, vol. 80, pp. 1–15.10.1016/j.actamat.2014.07.035 ↗
13. H.K. Dong, H. Chen, W. Wang, Y.J. Zhang, G. Miyamoto, T. Furuhara, C. Zhang, Z.G. Yang, and S.V.D. Zwaag: Acta Mater., 2018, vol. 158, pp. 167–79.10.1016/j.actamat.2018.07.052 ↗
14. S. Clark, V. Janik, A. Rijkenberg, and S. Sridhar: Mater. Charact., 2016, vol. 115, pp. 83–89.10.1016/j.matchar.2016.03.021 ↗
15. A.T. Davenport, F.G. Berry, and R.W.K. Honeycombe: Met. Sci. J., 1968, vol. 2, pp. 104–06.10.1179/030634568790443341 ↗
16. R. Okamoto, A. Borgenstam, and J. Ågren: Acta Mater., 2010, vol. 58, pp. 4783–90.10.1016/j.actamat.2010.05.014 ↗
17. H.J. Kestenbach, S.S. Campos, and E.V. Morales: Mater. Sci. Technol., 2006, vol. 22, pp. 615–26.10.1179/026708306X81487 ↗
18. F.Z. Bu, X.M. Wang, S.W. Yang, C.J. Shang, and R.D.K. Misra: Mater. Sci. Eng. A, 2015, vol. 620, pp. 22–29.10.1016/j.msea.2014.09.111 ↗
19. V.S.A. Challa, W.H. Zhou, R.D.K. Misra, R. O’Malley, and S.G. Jansto: Mater. Sci. Eng. A, 2014, vol. 595, pp. 143–53.10.1016/j.msea.2013.12.002 ↗
20. Z. Jia, R.D.K. Misra, R. O’malley, and S.J. Jansto: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7077–83.10.1016/j.msea.2011.05.073 ↗
21. J.I. Omale, E.G. Ohaeri, J.A. Szpunar, M. Arafin, and F. Fateh: Mater. Charact., 2019, vol. 147, pp. 453–63.10.1016/j.matchar.2018.12.003 ↗
22. J.I. Omale, E.G. Ohaeri, A.A. Tiamiyu, M. Eskandari, K.M. Mostafijur, and J.A. Szpunar: Mater. Sci. Eng. A, 2017, vol. 703, pp. 477–85.10.1016/j.msea.2017.07.086 ↗
23. S.I. Lee, S.Y. Lee, S.G. Lee, H.G. Jung, and B. Hwang: Met. Mater. Int., 2018, vol. 24, pp. 1221–31.10.1007/s12540-018-0173-9 ↗
24. L.-H. Lee, Yu. Chia-Hao, C.-Y. Wei, P.-C. Lee, J.-S. Huang, and C.-Y. Wen: Ultramicroscopy, 2019, vol. 197, pp. 95–9.10.1016/j.ultramic.2018.12.001 ↗
25. C. Li, G. Habler, L.C. Baldwin, and R. Abart: Ultramicroscopy, 2018, vol. 184, pp. 310–17.10.1016/j.ultramic.2017.09.011 ↗
26. T. Malis, S.C. Cheng, and R.F. Egerton: J. Electron Microsc. Technol., 1988, vol. 8, pp. 193–200.10.1002/jemt.1060080206 ↗
27. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131–39.10.1016/j.ultramic.2006.06.008 ↗
28. M.K. Miller: Atom Probe Tomography: Analysis at the Atomic Level, 1st ed. Springer, New York, 2012, pp. 157–97.
29. B. Gault, M.P. Moody, J.M. Cairney, and S.P. Ringer: Atom Probe Microscopy, 1st ed. Springer, New York, 2012, pp. 157–309.10.1007/978-1-4614-3436-8_7 ↗
30. S. Zaefferer, P. Romano, and F. Friedel: J. Microsc., 2008, vol. 230, pp. 499–508.10.1111/j.1365-2818.2008.02010.x ↗
31. Y.-W. Chen, Y.-T. Tsai, P.-Y. Tung, S.-P. Tsai, C.-Y. Chen, S.-H. Wang, and J.-R. Yang: Mater. Charact., 2018, vol. 139, pp. 49–58.10.1016/j.matchar.2018.01.041 ↗
32. H. Hu, H.S. Zurob, G. Xu, D. Embury, and G.R. Purdy: Mater. Sci. Eng. A, 2015, vol. 626, pp. 34–40.10.1016/j.msea.2014.12.043 ↗
33. W. Bleck and E. Ratte: Fundamentals of Cold Formable HSLA Steels, TMS, Pittsburgh, 2006, pp. 551–64.
34. X. Ma, C. Miao, B. Langelier, and S. Subramanian: Mater. Des., 2017, vol. 132, pp. 244–49.10.1016/j.matdes.2017.07.006 ↗
35. A.J. Craven, K. He, L.A.J. Garvie, and T.N. Baker: Acta Mater., 2000, vol. 48, pp. 3857–68.10.1016/S1359-6454(00)00194-4 ↗
36. S.G. Hong, K.B. Kang, and C.G. Park: Scr. Mater., 2002, vol. 46, pp. 163–68.10.1016/S1359-6462(01)01214-3 ↗
37. M.J. Leap and E.L. Brown: Scr. Mater., 2002, vol. 47, pp. 793–97.10.1016/S1359-6462(02)00283-X ↗
38. Z. Chen, M.H. Loretto, and R.C. Cochrane: Mater. Sci. Technol., 1987, vol. 3, pp. 836–44.10.1179/mst.1987.3.10.836 ↗
39. M. Grujicic, I.J. Wang, and W.S. Owen: Calphad, 1988, vol. 12, pp. 261–75.10.1016/0364-5916(88)90007-7 ↗
40. H.S. Zurob, C.R. Hutchinson, Y. Brechet, and G. Purdy: Acta Mater., 2002, vol. 50, pp. 3077–94.10.1016/S1359-6454(02)00097-6 ↗
41. X. Li, P. Wu, R. Yang, S. Zhao, S. Zhang, S. Chen, X. Cao, and X. Wang: Mater. Des., 2017, vol. 115, pp. 165–69.10.1016/j.matdes.2016.11.017 ↗
42. Q. Yu, Z. Wang, X. Liu, and G. Wang: Mater. Sci. Eng. A, 2004, vol. 379, pp. 384–90.10.1016/j.msea.2004.03.022 ↗