journal article·2022-06

Influences of High-Basicity High-Alumina Refining Slags on the Cleanliness and Control of Non-metallic Inclusions in Inconel 625 Superalloy

Pei Zhang, Wanyuan Gui, Min Jiang, Benli Luan

Publisher page

Abstract

Inconel 625 is a corrosion and oxidation-resistant nickel-based alloy with potential applications in boilers and pressure vessel. However, its corrosion resistance and mechanical properties are related to its purity. Unfortunately, fabrication of Inconel 625 alloy with high cleanliness and competitive cost remains a research and engineering challenge. With that, we report a new study on high-basicity slag-smelting technique used to improve the purity of Inconel 625. More specifically, the effect of slag basicity and reaction time on the cleanliness and the control of oxide inclusions in Inconel 625 alloy were thoroughly investigated. The results showed that slag B with higher basicity possesses stronger ability in improving cleanliness and removing inclusions. Moreover, the inclusions in Inconel 625 alloy refining using slag A mainly and consistently composed of MgO-Al2O3. In the case of refining using slag B, however, three different types of impurity inclusions were formed, including MgO, binary MgO-Al2O3, and ternary CaO-MgO-Al2O3 in the refined Inconel 625 alloy. A more detailed analysis based on thermodynamic calculations revealed that MgO-Al2O3 can be spontaneously formed in the alloys during the smelting using both slag systems. However, the content of MgO in slag B is closer to saturation, which contributed significantly to the formation of MgO-based inclusions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Iron and Steelmaking Processes · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. L. E. Shoemaker: TMS, Warrendale, PA, 2005, pp. 409–18.10.7449/2005/Superalloys_2005_409_418 ↗
2. J.L. Yang, X.M. Zhu, J.Y. Xiong, Q. Chen, and J.Z. Guo: Rare Met. Mater. Eng., 2020, vol. 49, pp. 1615–22.
3. D. Brooksbank: Andrews K W. J. Iron Steel Inst., 1968, vol. 30, pp. 595–99.
4. J.P. Niu, X.F. Sun, T. Jin, K.N. Yang, H.R. Guan, and H.Z. Qi: Acta Metall. Sin., 2002, vol. 10, pp. 36–42.
5. X.C. Chen, C.B. Shi, H.J. Guo, F. Wang, H. Ren, and D. Feng: Metall. Mater. Trans. B., 2012, vol. 43B, pp. 1596–1607.10.1007/s11663-012-9723-6 ↗
6. S.C.Duan, X. Shi, M. C. Zhang. B. Li, W. S. Yang, F. Wang, H .J. Guo and J. Guo: Metall. Mater. Trans. B, 2020, vol. 51B, pp. 353–64.10.1007/s11663-019-01729-3 ↗
7. X.C. Chen, R. Fu, and H. Ren: China New Technol. New Prod., 2011, vol. 10, pp. 1–2.
8. Y.T. Ding, W. Wang, H.F. Li, T.B. Guo, Y. Hu, and J.J. Liu: Rare Met. Mater. Eng., 2018, vol. 47, pp. 687–91.
9. Z.D. Yin, B.Y. Dai, and Z.B. Liu: China Fou., 2011, vol. 5, pp. 462–65.
10. J. P. Niu, Preparation Technology of Pure Steel and Superalloy, 2009, pp. 122–17.
11. H. Ohta and H. Suito: ISIJ Int., 2003, vol. 43, pp. 1301–08.10.2355/isijinternational.43.1301 ↗
12. S.W. Cho and H. Suito: ISIJ Int., 1994, vol. 34, pp. 746–54.10.2355/isijinternational.34.746 ↗
13. D. Janke and W.A. Fischer: Arch. Eisenhuettenwes., 1975, vol. 46, pp. 297–302.
14. Y. A. Ageev and S. A. Archugow: Izv. Akad. Nauk SSSR, Met., 1984, pp 78.
15. N. Nadif and C. Gatellier: Rev. Metall. Cah., Inf. Tech., 1986, pp. 377–94.10.1051/metal/198683050377 ↗
16. J.H. Park and H. Todoroki: ISIJ Int., 2010, vol. 50, pp. 1333–46.10.2355/isijinternational.50.1333 ↗
17. M. Kohler, H.J. Engell, and D. Janke: Steel Res., 1985, vol. 56, pp. 419–23.10.1002/srin.198500659 ↗
18. G.K. Sigworth, J.F. Elliott, G. Vaugh, and G.H. Geiger: Metall. Soc. CIM., 1977, vol. 16, pp. 104–10.
19. Z.Y. Deng and M.Y. Zhu: ISIJ Int., 2013, vol. 53, pp. 450–58.10.2355/isijinternational.53.450 ↗
20. Y. Miyazaki, F. Kirihara, and H. Todoroki: ISIJ Int., 2019, vol. 59, pp. 1205–13.10.2355/isijinternational.ISIJINT-2018-685 ↗
21. J.Y. Chio and H.G. Lee: ISIJ Int., 2003, vol. 43, pp. 1348–55.10.2355/isijinternational.43.1348 ↗
22. M. Valdez, G.S. Shannon, and S. Sridhar: ISIJ Int., 2006, vol. 46, pp. 450–7.10.2355/isijinternational.46.450 ↗
23. M. Jiang, X.H. Wang, B. Chen, and W.J. Wang: ISIJ Int., 2010, vol. 50, pp. 95–104.10.2355/isijinternational.50.95 ↗
24. C.Y. Liu, F.X. Huang, J.L. Suo, and X.H. Wang: Metall. Mater. Trans. B., 2016, vol. 47B, pp. 989–98.10.1007/s11663-015-0540-6 ↗
25. H. Todoroki and K. Mizuno: Iron Steelmaker., 2003, vol. 30, pp. 60–7.
26. H. Ohta and H. Suito: Metall. Mater. Trans. B., 1998, vol. 29B, pp. 119–29.10.1007/s11663-998-0014-1 ↗
27. X.A. Li, N. Wang, M. Chen, and R.Q. Zeng: ISIJ Int., 2020, vol. 20, pp. 2446–54.10.2355/isijinternational.ISIJINT-2020-237 ↗