journal article·2021-03

Plastic Deformation and Microstructure Evolution in Niobium at Temperatures from 1473 K to 1823 K

Emily A. D. Brady, Eric M. Taleff

Publisher page

Abstract

Plastic deformation and microstructure evolution are investigated at elevated temperatures in a low-impurity (ASTM B393-18 Type 1) niobium sheet material. Data from tensile tests are reported for temperatures from 1473 K to 1823 K (1200 °C to 1550 °C) at constant true-strain rates of 10−3 and 10−4 s−1. Microstructures produced by static annealing and by tensile deformation at these temperatures are characterized using backscatter electron imaging. Significant static grain growth is observed and increases with increasing temperature. Young’s elastic modulus data for niobium from the literature are reviewed to recommend modulus values from 293 K to 2300 K (20 °C to 2027 °C) for randomly textured polycrystalline niobium. Steady-state creep analysis of data above 1370 K (1097 °C), half the melting temperature, produces a stress exponent of 5.6 and an activation energy for creep of 454 kJ/mol, which is close to that of lattice self-diffusion. Dislocation substructure is observed following elevated temperature deformation. These data are compared with data from the literature to conclude that low-impurity niobium deforms by five-power creep across the conditions examined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. T.H. Schofield: J. Inst. Metals, 1956–57, vol. 85, pp. 372–74.
2. J.B. Lambert and J.J. Rausch: Refractory Metals and Alloys, ASM Handbook, vol. 2, ASM International, 1990, pp. 557–65.10.31399/asm.hb.v02.a0001079 ↗
3. ASTM B393-18, Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate, ASTM International, West Conshohocken, PA, 2018, www.astm.org.
4. 4.A. N. Behera, R. Kapoor, A. Sarkar and J. K. Chakravartty: Mater. Sci. Technol., 2014, vol. 30, pp. 637-64410.1179/1743284713Y.0000000387 ↗
5. G. Brinson and B. B. Argent: J. Inst. Metals, 1962–63, vol. 91, pp. 293–98.
6. J. Stoop and P. Shahinian: NRL Report 6095, 1964.
7. J. Stoop and P. Shahinian: NRL Report 6464, 1966.
8. 8.J. D. W. Rawson and B. B. Argent: J. Inst. Metals, 1967, vol. 95, pp. 212-16.
9. 9.M. J. Klein and M. E. Gulden: Metall. Trans., 1973, vol. 4, pp. 2175-8010.1007/BF02643284 ↗
10. 10.A. C. Lewis, D. van Heerden, C. Eberl, K. J. Hemker, and T. P. Weihs: Acta Mater., 2008, vol. 56, pp. 3044-305210.1016/j.actamat.2008.02.033 ↗
11. D.P. Gregory and G.H. Rowe: Columbium Metallurgy, AIME Metallurgical Society Conferences, 1960, vol. 10, pp. 309–41.
12. C.R. Tottle: J. Inst. Metals, 1956–57, vol. 85, pp. 375–78.
13. L.R. Williams and T.J. Heal: Metallwerk Plansee Proceedings, 1958, vol. F. Benesovsky ed., pp. 350–70.
14. T.J. Heal: Second United Nations International Conference on the Peaceful Uses of Atomic Energy, 1958, no. 305, pp. 208–19
15. 15.M. J. Davidson, M. Biberger, and A. K. Mukherjee: Scr. Metall., 1992, vol. 27, pp.1829-183410.1016/0956-716X(92)90028-D ↗
16. Plansee. “Niobium.” Plansee, https://www.plansee.com/en/materials/niobium.html. Accessed 12 May 2020.
17. ASTM E112-13, Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 2013, www.astm.org.
18. 18.O.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1968, vol. 13, pp. 325-39010.1016/0079-6425(68)90024-8 ↗
19. 19.J. Ciulik and E. M. Taleff: Scr. Mater., vol. 61, 2009, pp. 895-89810.1016/j.scriptamat.2009.07.021 ↗
20. 20.D. L. Worthington, N. A. Pedrazas, P. J. Noell, and E. M. Taleff: Metall. Mater. Trans. A, vol. 44A, 2013, pp. 5025-503810.1007/s11661-013-1865-x ↗
21. 21.N. A. Pedrazas, T. E. Buchheit, E. A. Holm, and E. M. Taleff: Mater. Sci. Engrg. A, vol. 610, 2014, pp. 76-8410.1016/j.msea.2014.05.031 ↗
22. 22.P. J. Noell, D. L. Worthington, and E. M. Taleff: Metall. Mater. Trans. A, vol. 46A, 2015, pp. 5708-571810.1007/s11661-015-3188-6 ↗
23. 23.P. J. Noell and E. M. Taleff: JOM, vol. 67, 2015, pp. 2642-4510.1007/s11837-015-1592-4 ↗
24. 24.P. J. Noell and E. M. Taleff: Metall. Mater. Trans. A, vol. 47A, 2016, pp. 5023-503610.1007/s11661-016-3644-y ↗
25. 25.P. J. Noell, D. L. Worthington, and E. M. Taleff: Mater. Sci. Engrg. A, vol. 692, 2017, pp. 24-3410.1016/j.msea.2017.03.021 ↗
26. 26.O. A. Ruano and O. D. Sherby: Revue Phys. Appl., 1988, vol. 23, pp. 625-63710.1051/rphysap:01988002304062500 ↗
27. M.E. Kassner: Fundamentals of Creep in Metals and Alloys, Butterworth-Heinemann, 2015, pp. 9–91.10.1016/B978-0-08-099427-7.00001-3 ↗
28. 28.P. E. Armstrong and H. L. Brown: Trans. ASM, 1965, vol. 58, pp. 30-37.
29. D.J. Livesey: J. Inst. Metals, 1959-60, vol. 88, pp. 144.
30. 30.M. B. Reynolds: Trans. ASM, 1953, vol. 45, pp. 839-861.
31. 31.H. A. Wriedt and R. A. Oriani: Scr. Metall., 1974, vol. 8, pp. 203-08.10.1016/0036-9748(74)90239-7 ↗
32. D.P. Laverty and E.B. Evans: Columbium Metallurgy, AIME Metallurgical Society Conferences, 1960, vol. 10, pp. 299–307.
33. J.J. Harwood: Aircr. Missiles, May 1958, pp. 32–38.10.1093/ptj/38.1.32 ↗
34. W.S. Hazelton: Aircr. Missiles, April 1958, pp. 41–45.10.1051/mattech/195841020045 ↗
35. Colin James Smithells: Smithells Metals Reference Book, 8th ed, Elsevier Science, Netherlands, 2004, pp. 13–12, 15–5
36. Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology, New Series, Group III, Vol. 2, Berlin, Springer-Verlag, 1969
37. 37.E. Walker and M. Peter, J. Appl. Phys., 1977, vol. 48, 2820-2610.1063/1.324064 ↗
38. 38.D. M. Schlader and J. F. Smith, J. Appl. Phys., 1977, vol. 48, 5062-6610.1063/1.323581 ↗
39. 39.A. I. Artemov, A. E. Kissil, E. M. Lyutyi, and O. S. Zvikilevich: Probl. Prochn., 1983, no. 1, pp. 14-17.
40. 40.C. Zener and J. H. Hollomon: J. Appl. Phys., 1944, vol. 15, 22-3210.1063/1.1707363 ↗
41. ASTM B392-18, Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire, ASTM International, West Conshohocken, PA, 2018, www.astm.org.