journal article·2018-09

Reaction of Ni-Based Superalloy with Liquid Sn During Liquid-Metal-Cooled Directional Solidification

J. Shen, Z. G. Xu, Y. Z. Lu, W. Zheng, L. H. Lou, J. Zhang

Publisher page

Abstract

The liquid metal cooling (LMC) process has attracted increasing attention in the investment casting industry in recent years. Liquid Sn is generally used as the cooling medium in state-of-the-art LMC processes even though Sn is known to be a detrimental element in Ni-based superalloys. Therefore, Sn contamination in superalloys has become one of the top concerns for the LMC process. In this work, the reaction between liquid Sn and a Ni-based superalloy was investigated. The detectable reaction between superalloy and liquid Sn began at approximately 500 °C, and the reaction products became complex with increasing temperature. At high temperatures beyond 750 °C, a very short contact period of less than 1 minute led to a severe surface reaction. The results were compared to the surface reaction zone of the large blade. The critical time when the superalloy casting contacted liquid Sn is obtained based on experimental observations and numerical simulations. The surface reaction will occur if the ceramic mold cracked at this point or previously. The surface contamination during LMC solidification is associated with the volume of the casting. The present results indicate that surface reaction would be avoided if the volume of the large blade is reduced to ~ 30 pct of the original size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. A Lohmüeller, W Esser, J Gossmann, M Hoerdler, J Preuhs, and RF Singer (2000). In: TM Pollock, RD Kissinger, RR Bowman, KA Green, M Mclean, S Olson and JJ Schirra (eds) Superalloys. TMS, Warrendale, pp. 181-188.10.7449/2000/Superalloys_2000_181_188 ↗
2. A. Kermanpur, N. Varahraam, P. Davami, and M. Rappaz: Metall. Mater. Trans., 2000, vol. 31B, pp. 1293-1304.10.1007/s11663-000-0017-z ↗
3. AJ Elliott, GB Karney, MFX Gigliotti, TM Pollock (2004) In: KA Green, TM Pollock, H Harada, TE Howson, RC Reed, JJ Schirra, S Walston (eds) Superalloys. TMS, Warrendale, pp. 421-430.10.7449/2004/Superalloys_2004_421_430 ↗
4. J. Zhang and L.H. Lou: J. Mater. Sci. Technol., 2007, 23, pp. 289-300.
5. R.F. Guo, L. Liu, Y.F. Li, X.B. Zhao, J. Zhang and H.Z. Fu: Foundry, 2017, 63, pp. 145-151.
6. L. Liu, J. Zhang, J. Shen, T.W. Huang and H.Z. Fu: Mater. China, 2010, 29, pp. 1-9.
7. A.J. Elliott, S. Tin, W.T. King, S.C. Huang, M.F.X. Gifliotti, and T.M. Pollock: Metall. Mater. Trans., 2004, vol. 35A, pp. 3221-3231.10.1007/s11661-004-0066-z ↗
8. S. Steuer, P. Villechaise, T.M. Pollock, and J. Cormier: Mater. Sci. Eng., 2015, 645A, pp. 109-115.10.1016/j.msea.2015.07.045 ↗
9. A.J. Elliott and T.M. Pollock: Metall. Mater. Trans., 2007, vol. 38A, pp. 871-882.10.1007/s11661-006-9085-2 ↗
10. M.M. Franke, R.M. Hilbinger, A. Lohmüller, and R.F. Singer: J. Mater. Process. Technol., 2013, 213, pp. 2081-2088.10.1016/j.jmatprotec.2013.06.001 ↗
11. CL Brundidge, TM Pollock (2012) In: ES Huron, RC Reed, MC Hardy, MJ Mills, RE Montero, PP Portella, J Telesman (eds) Superalloys. TMS, Warrendale, pp. 379-85.10.1002/9781118516430.ch41 ↗
12. C. Liu, K.W. Li, J. Shen, J. Zhang, and L.H. Lou: Metall. Mater. Trans., 2012, vol. 43A, pp. 405-409.10.1007/s11661-011-1023-2 ↗
13. X.W. Li, L. Wang, J.S. Dong, L.H. Lou, and J. Zhang: Metall. Mater. Trans., 2017, vol. 48A, pp. 2682-2686.10.1007/s11661-017-4057-2 ↗
14. S.C. Huang, S.F.R. Wski, M.F.X. Gigliotti, R.J. Petterson, and L.B. Kool: United States Patent, US 8210240 B2, 2012.
15. Y.Z. Lu, H.J. Xi, J. Shen, W. Zheng, G. Xie, L.H. Lou and J. Zhang: Acta Metall. Sinica, 2015, vol. 51, pp. 603-611.
16. Y.Z. Lu: Ph.D. Thesis, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 2015.
17. C. Liu, D.M. Liao, Y.Z. Lu, and T. Chen: Metall. Mater. Trans., 2016, vol. 47A, pp. 4640-4647.
18. P. Peng, J.R. Yang, X.Z. Li, Y.Q. Su, J.J. Guo, and H.Z. Fu: J. Mater. Sci., 2016, vol. 51, pp. 1512-1521.10.1007/s10853-015-9472-4 ↗
19. C.C. Yu, P.C. Su, S.J. Bai, and T.H. Chuang: Inter. J. Precision Eng. Manuf., 2014, vol. 15, No. 1, pp. 143-147.10.1007/s12541-013-0317-2 ↗
20. D. Gur, and M. Bamberger: Acta mater., 1998, vol. 46, pp. 4917-4923.10.1016/S1359-6454(98)00192-X ↗
21. M. Hördler: Ph.D. Thesis, University of Erlangen-Nürnberg, Erlangen, 2006.