journal article·2018-08

Effects of Solid Solution Treatments on the Microstructure and Mechanical Properties of a Nanoscale Precipitate-Strengthened Ferritic Steel

Y. Zhao, H. Guo, S. S. Xu, M. J. Mao, L. Chen, O. Gokhman, Z. W. Zhang

Publisher page

Abstract

Solid solution treatment (SST) and age hardening are the two main treatments used to produce nanoscale precipitation-strengthened steels. In this work, solution treatment and aging are employed to develop a nanoscale precipitation-strengthened steel displaying high degrees of strength, ductility, and toughness. The effects of SST on the microstructure and mechanical properties of the produced steel are investigated. The results show that the solution temperature strongly influences the matrix microstructure. Partial austenitization between $$ A_{{{\text{c}}1}} $$ and $$ A_{{{\text{c}}3}} $$ favors the formation of granular ferrite, while complete austenitization above $$ A_{{{\text{c}}3}} $$ leads to the formation of polygonal ferrite. Refined granular ferrite with a low dislocation density can effectively improve the plasticity and low-temperature toughness of steel. Precipitation strengthening is mainly related to the nature of the nano-precipitates, specifically their size and number density, independently of the matrix microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. S. Vaynman, M.E. Fine, S. Lee, and H.D. Espinosa: Scripta Mater., 2006, vol. 55, pp. 351-354.10.1016/j.scriptamat.2006.04.029 ↗
2. Y.R. Wen, Y.P. Li, A. Hirata, Y. Zhang, T. Fujita, T. Furuhara, C.T. Liu, A. Chiba, and M.W. Chen: Acta Mater., 2013, vol. 61, pp. 7726-7740.10.1016/j.actamat.2013.09.011 ↗
3. D. Isheim, M.S. Gagliano, M.E. Fine, and D.N. Seidman: Acta Mater., 2006, vol. 54, pp. 841-849.10.1016/j.actamat.2005.10.023 ↗
4. Z.B. Jiao, J.H. Luan, Z.W. Zhang, M.K. Miller, W.B. Ma, and C.T. Liu: Acta Mater., 2013, vol. 61 (16), pp. 5996-6005.10.1016/j.actamat.2013.06.040 ↗
5. Z.W. Zhang, C.T. Liu, Y.R. Wen, A. Hirata, S. Guo, G. Chen, M.W. Chen, and B.A. Chin: Metall. Mater. Trans. A, 2012, vol. 43, pp. 351-359.10.1007/s11661-011-0835-4 ↗
6. S. Vaynman, D. Isheim, R.P. Kolli, S.P. Bhat, D.N. Seidman, and M.E. Fine: Metall. Mater. Trans. A, 2008, vol. 39, pp. 363-373.10.1007/s11661-007-9417-x ↗
7. Y. Zhao, S.S. Xu, J.P. Li, J. Zhang, L.W. Sun, L. Chen, G.A. Sun, S.M. Peng, and Z.W. Zhang: Mater. Sci. Eng. A, 2017, vol. 691, pp. 162-167.10.1016/j.msea.2017.03.018 ↗
8. M. Kapoor, D. Isheim, S. Vaynman, M.E. Fine, and Y.W. Chung: Acta Mater., 2016, vol. 104, pp. 166-171.10.1016/j.actamat.2015.11.041 ↗
9. D. Jain, D. Isheim, A.H. Hunter, and D.N. Seidman: Metall. Mater. Trans. A, 2016, vol. 47, pp. 1-13.
10. M.J. Alinger, G.R. Odette, and D.T. Hoelzer: Acta Mater., 2009, vol. 57, pp. 392-406.10.1016/j.actamat.2008.09.025 ↗
11. Z.K. Teng, C.T. Liu, G. Ghosh, P.K. Liaw, and M.E. Fine: Intermetallics, 2010, vol. 18, pp. 1437-1443.10.1016/j.intermet.2010.03.026 ↗
12. A. Ghosh, S. Sahoo, M. Ghosh, R. Ghosh, and D. Chakrabarti: Mater. Sci. Eng. A, 2014, vol. 613, pp. 37-47.10.1016/j.msea.2014.06.091 ↗
13. Z.W. Zhang, C.T. Liu, S. Guo, J.L. Cheng, G. Chen, T. Fujita, M.W. Chen, Y.W. Chung, S. Vaynman, and M.E. Fine: Mater. Sci. Eng. A, 2011, vol. 528, pp. 855-859.10.1016/j.msea.2010.10.058 ↗
14. M. Kapoor, D. Isheim, G. Ghosh, S. Vaynman, M.E. Fine, and Y.W. Chung: Acta Mate., 2014, vol. 73, pp. 56-74.10.1016/j.actamat.2014.03.051 ↗
15. A. Urakami, and M.E. Fine: Scripta Metal., 1970, vol. 4, pp. 667-671.10.1016/0036-9748(70)90203-6 ↗
16. Y.R. Wen, A. Hirata, Z.W. Zhang, T. Fujita, C.T. Liu, J.H. Jiang, and M.W. Chen: Acta Mater., 2013, vol. 61, pp. 2133-2147.10.1016/j.actamat.2012.12.034 ↗
17. J. Weertman: Phys. Rev., 1956, vol. 101, pp. 1429-1430.10.1103/PhysRev.101.1429 ↗
18. L. Tan, T.S. Byun, Y. Katoh, and L.L. Snead: Acta Mater., 2014, vol. 71, pp. 11-19.10.1016/j.actamat.2014.03.015 ↗
19. Z.B. Jiao, J.H. Luan, M.K. Miller, C.Y. Yu, and C.T. Liu: Acta Mater., 2015, vol. 84, pp. 283-291.10.1016/j.actamat.2014.10.065 ↗
20. D.N. Seidman: Annu. Rev. Mater. Res., 2007, vol. 37, pp. 127-158.10.1146/annurev.matsci.37.052506.084200 ↗
21. M.A. Suarez, M.A. Alvarez-Pérez, O. Alvarez-Fregoso, and J.A. Juarez-Islas: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4924-4926.10.1016/j.msea.2011.03.016 ↗
22. S.W. Thompson: Mater. Charact., 2013, vol. 77, pp. 89-98.10.1016/j.matchar.2013.01.002 ↗
23. Z.W. Zhang, C.T. Liu, X.L. Wang, K. Littrell, M.K. Miller, K. An, B. Chin: Phys. Rev. B, 2011, vol. 84, pp. 5324-5326.
24. Q.Wu, D.L. Sun, and C.S. Liu, J. Mater. Eng. Perform., 2009, vol. 18, pp. 952-958.10.1007/s11665-008-9333-2 ↗
25. A. Rajasekhar, G. Madhusudhan Reddy, T. Mohandas and V. S. R. Murti, Mater. Des., 2009, vol. 30, pp. 1612-1624.10.1016/j.matdes.2008.07.042 ↗
26. N. Liu, Z.G. Deng, and M.G. Huang, Mater. Sci. Technol., 1991, vol. 7 (11), pp. 1057-1062.;10.1179/mst.1991.7.11.1057 ↗
27. H. R. Yang, K. B. Lee and H. Kwon, Metall. Mater. Trans. A, 2001, vol. 32, pp. 2393-2396.10.1007/s11661-001-0213-8 ↗
28. L.A. Dobrzański, and J. Trzaska: J. Mater. Process. Technol., 2004, vol. 155, pp. 1950-1955.10.1016/j.jmatprotec.2004.04.056 ↗
29. K. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-727.
30. T. Furuhara, H. Saito, G. Miyamoto, and T. Maki: Materials Science Forum, 2010, vol. 654, pp. 7-10.10.4028/www.scientific.net/MSF.654-656.7 ↗
31. H.J. Song, R.P. Shi, Y.Z. Wang and J.J. Hoyt: Metall. Mater. Trans. A, 2017, vol. 48 (6) pp. 2730-2738.10.1007/s11661-016-3711-4 ↗
32. H. I. Aaronson, G. Spanos, R. A. Masamura, R. G. Vardiman, D. W. Moon, E. S. K. Menon, and M. G. Hall: Mater. Sci. Eng. B, 1995, vol. 32, pp. 107-123.10.1016/0921-5107(95)80022-0 ↗
33. H. I. Aaronson and C. Wells: JOM, 1956, vol. 8, pp. 1216-1223.10.1007/BF03377853 ↗
34. J. Kang, C.N. Li, G. Yuan, and G.D. Wang: Mater. Lett., 2016, vol. 175, pp. 157-160.10.1016/j.matlet.2016.04.007 ↗
35. T. Inoue, F. Yin, Y. Kimura, K. Tsuzaki, and S. Ochiai: Metall. Mater. Trans. A, 2009, vol. 41, pp. 341-355.
36. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1-17.10.1016/j.msea.2006.08.095 ↗
37. R. Kuzel: Z. Kristallogr. Suppl., 2006, vol. 2006, pp. 75-80.10.1524/zksu.2006.suppl_23.75 ↗
38. M.A. Krivoglaz: Z. Kristallogr., 1996, vol. 211, pp. 587-588.
39. S. Morito, J. Nishikawa, and T. Maki: ISIJ. Int., 2003, vol. 43, pp. 1475-1477.10.2355/isijinternational.43.1475 ↗
40. A. Zare, and A. Ekrami: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4422-4426.10.1016/j.msea.2011.02.021 ↗
41. J. Zhang, H. Di, Y. Deng, and R.D.K. Misra: Mater. Sci. Eng. A, 2015, vol. 627, pp. 230-240.10.1016/j.msea.2015.01.006 ↗
42. D.K. Matlock, G. Krauss, L.F. Ramos, and G.S. Huppi: Structure and Properties of Dual-Phase Steels. AIME, New York, 1979, vol. 62.
43. E.N. Birgani, and M. Pouranvari: Metal 2009, Vol. 2009, pp. 19–21.
44. G. Stechauner and E. Kozeschnik: Acta Mater., 2015, 100: 135-146.10.1016/j.actamat.2015.08.042 ↗
45. K. C. Russell: Advances in Colloid and Interface Science, 1980, 13(3-4): 205-318.10.1016/0001-8686(80)80003-0 ↗
46. S.S. Xu, Y. Zhao, X. Tong, H. Guo, L. Chen, L.W. Sun, M. Peng, M.J. Chen, D. Chen, Y. Cui, G.A. Sun, S.M. Peng, and Z.W. Zhang: J. Alloy. Compd., 2017, vol. 712, pp. 573-578.10.1016/j.jallcom.2017.04.143 ↗