Finite Element Analysis of Deformation Due to Ball Indentation and Evaluation of Tensile Properties of Tempered P92 Steel
Source abstract
Abstract
Ball indentation (BI) technique has been effectively used to evaluate the tensile properties with minimal volume of material. In the present investigation, BI test carried out on P92 steel (9Cr-0.5Mo-1.8W), using 0.76 mm diameter silicon nitride ball indenter was modeled using finite element (FE) method and analyzed. The effect of test temperature [300 K and 923 K (27 °C and 650 °C)], tempering temperature [1013 K, 1033 K, and 1053 K (740 °C, 760 °C, and 780 °C)], and coefficient of friction of steel (0.0 to 0.5) on the tensile strength and material pile-up was investigated. The stress and strain distributions underneath the indenter and along the top elements of the model have been studied to understand the deformation behavior. The tensile strength was found to decrease with increase in tempering and test temperatures. The increased pile-up around the indentation was attributed to the decrease in strain hardening exponent (n) with increase in the test temperature. The pile-up height determined from profilometry studies and FE analysis as well as the load depth curve from BI and FE analysis was in agreement. The maximum strain location below the indentation changes with the test temperature. Stress–strain curves obtained by conventional tensile, BI test, and representative stress–strain concepts of FE model were found exactly matching.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. A. Nayebi, R. El Abdi, O. Bartier, G. Mauvoisin, Mechanics of Materials, 2002, 34 243–254,10.1016/S0167-6636(02)00113-8 ↗
2. J. S. Field, M.V. Swain, J. Mater. Res., 1995, 10 (1), 101–112.10.1557/JMR.1995.0101 ↗
3. K. L. Murty, P. Q. Miraglia, M. D. Mathew, V. N. Shah, F. M. Haggag, 1999, INT J PRES VES PIP, 76, 361-369.10.1016/S0308-0161(99)00006-X ↗
4. F.M. Haggag, R.K. Nanstad, J.T. Hutton, D.L. Thomas, and R.L. Swain, Applications of Automation Technology to Fatigue and Fracture Testing, American Society for Testing and Materials, Philadelphia, 1990, pp. 188–208.10.1520/STP25039S ↗
5. F.M. Haggag, Standard Test Methods for Automated Ball Indentation (ABI) Testing of Metallic Materials and Structures to Determine Tensile Properties and Stress–Strain Curves Copyright 1988–2009, Advanced Technology Corporation, Oak Ridge, TN, pp. 1–24.
6. F.M. Haggag: U.S. Patent No. 4852397, 1989, p. 1.
7. F.M. Haggag and K.L. Murty: Non-destructive Evaluation and Materials Properties III, P.K. Liaw, O. Buck, R.J. Arsenault, and R.E. Green, Jr., eds., TMS, Warrendale, PA, 1997, p. 101.
8. H.K. Khandelwal, K. Sharma, and R. Chhibber: . Miner. Mater. Charact. Eng., 2012, vol. 11, pp. 1095–1100.
9. K. Sharma, P.K. Singh, V. Bhasin, and K.K. Vaze: J. Miner. Mater. Charact. Eng., 2011, vol. 10(7), pp. 661–69
10. Dipika R. Barbadikar, D.R. Peshwe, A.R. Ballal, J. Ganeshkumar, K. Laha and M.D. Mathew, Materials Science and Engineering A, 2015, 624, 92–101.10.1016/j.msea.2014.11.075 ↗
11. M. D. Mathew, K. L. Murty, K. B. S. Rao, S. L. Mannan, Mater. Sci. Eng., A, 1999, 264 159-166.10.1016/S0921-5093(98)01098-3 ↗
12. M. D. Mathew, L. M. Lietzan, K. L. Murty and V. N. Shah, Mater. Sci. Eng., A, 1999, 269, 186-196.10.1016/S0921-5093(99)00140-9 ↗
13. K. L. Murty, M. D. Mathew, Y. Wang, V. N. Shah, F. M. Haggag, Int. J. Pres. Ves. Pip., 1998, 75, 831-840.10.1016/S0308-0161(98)00093-3 ↗
14. Kamal Sharma, P. K. Singh, Vivek Bhasin, K. K. Vaze, J. Nucl. Mater., 1998, 252, 187-194.10.1016/S0022-3115(97)00338-3 ↗
15. M.D. Mathew, J. Ganesh Kumar, V. Ganesan, and K. Laha: High Temp. Mater. Process., 2014, inprint.
16. D. Tabor, The hardness of metals, Oxford University Press, London, 1951, 46-47.
17. F.M. Haggag: Standard Technical Publication 1204, American Society for Testing and Materials, Philadelphia, 1993, pp. 27–44.
18. V. Karthik, P. Visweswaran, A. Bhushan, D.N. Pawaskar, K.V. Kasiviswanathan, T. Jayakumar, and B. Raj: Int. J. Mech. Sci., 2012, vol. 54, pp. 74–83.10.1016/j.ijmecsci.2011.09.009 ↗
19. X. Hernot, O. Bartier, Y. Bekouche, R. El Abdi, G. Mauvoisin, Acta Mater., 2006, 54, 1965–1973.10.1016/j.ijsolstr.2005.06.007 ↗
20. B. Taljat, G.M. Phar, Int.J. Solids Struc., 2004, 41 3891–3904.10.1016/j.ijsolstr.2004.02.033 ↗
21. A. Bolshakov, G. M. Pharr, Journal of Materials Research, 1998, 13 (4), 1049–1058.10.1557/JMR.1998.0146 ↗
22. A. L. Norbury, T. Samuel,. J Iron Steel Inst, 1928, 117, 673–675.
23. J. R. Matthews. Indentation hardness and hot pressing. Acta Metall (1980), 28:311–318.10.1016/0001-6160(80)90166-2 ↗
24. S. Biwa, B. Storakers An analysis of fully plastic Brinell indentation. J Mech Phys Solids 1995, 43, 1303–1333.10.1016/0022-5096(95)00031-D ↗
25. B. Taljat, T. Zacharia, and F. Kosel: Int. J. Solids Struct. 1998, vol. 35(33), pp. 411–26.10.1016/S0020-7683(97)00249-7 ↗
26. T. Yamamoto, H. Kurishita, and H. Matsui: J. Nucl. Mater., 1999, vol. 440, pp. 271–72.
27. S. H. Kim, M. K. Baik. Dongil Kwon, J. Eng. Mater., 2005, 127, 265-272.
28. H. Lee, J.H. Lee, and G.M. Pharr: J. Mech. Phys. Solids, 2005, vol. 53, pp. 2037–69.10.1016/j.jmps.2005.04.007 ↗
29. Olivier Bartier, Xavier Hernot, Gérard Mauvoisin, Mech. Mater., 2010, 42, 640-656.10.1016/j.mechmat.2010.03.003 ↗
30. M. Beghini, L. Bertini, and V. Fontanari: Int. J. Solids Struct., 2006, vol. 43, pp. 2441–59.10.1016/j.ijsolstr.2005.06.068 ↗
31. Yan Ping Cao, Jian Lu, Acta Mater., 2004, 52 4023–4032.10.1016/j.actamat.2004.05.018 ↗
32. H. Habbab, B.G. Mellor, S. Syngellakis Acta Mater., 2006, 54, 1965–1973.10.1016/j.actamat.2005.12.021 ↗
33. Jeong-Hoon Ahn and Dongil Kwon, J. Mater. Res., 2001, 16, 11, 3170-3178.10.1557/JMR.2001.0437 ↗
34. Sung Hoon Kim, Baik Woo Lee, Yeol Choi, Dongil Kwon, Mater. Sci. Eng., A, 2006, 415, 59-65.10.1016/j.msea.2005.08.217 ↗
35. Carl D. Lundin, Peng Liu and Yan Cui, WRC Bulletin, 2000, 454, 1-36.
36. P. J. Ennis and A. Czyrska-Filemonowicz, Sadhana, 2003, 28, 709-730.10.1007/BF02706455 ↗
37. Kouichi Maruyama, Kota Sawada and Jun-ichi Koike, ISIJ International, 2001, 46, 6, 641-653.10.2355/isijinternational.41.641 ↗
38. S. Senturia: Micro System Design, Illustrated Reprint, Springer, New York, 2013, p. 196.
39. E. RichardBooser, Tribology Data Handbook: An Excellent Friction, Lubrication, and Wear Resource, CRC Press, Boca Raton, FL, 1997, pp. 495–98.10.1201/9781420050479 ↗
40. George E. Dieter, Mechanical metallurgy, 3rd ed., Mc Graw-Hill book co., New York, 1988, 534.
41. T.R. Malow, C.C. Koch, P.Q. Miraglia, K.L. Murty, Mater. Sci. Eng., A, 1998, 252, 1, 36-43.10.1016/S0921-5093(98)00661-3 ↗
42. G. Das, S. Ghosh, and S. Ghosh: NDTE Int., 2006, vol. 39, pp. 155–61.10.1016/j.ndteint.2005.06.011 ↗
43. A. Kumaraswamy, V. Vasudeva Rao, Mater. Sci. Eng., A, 2010, 527, 6230–6234.10.1016/j.msea.2010.06.034 ↗
44. Hu Huang, Chengli Shi, Hongwei Zhao, and Lin Zhang, AIP Advances 3, 2013, 042116-1-12.10.1063/1.4802835 ↗
45. S. Jahanmir: Friction and Wear of Ceramics, CRC Press, New York, 1993, p. 167.10.1201/9781482277555 ↗
46. N.J. GaneshKumar and M.D. Mathew: J. Mater. Eng. Perform., 2013, vol. 22, pp. 492–97.10.1007/s11665-012-0290-4 ↗