Microstructure Formation in Hypoeutectic Alloys in the Fe–C–B–Cr–W System
Source abstract
Abstract
Abstract This work investigates the influence of tungsten (W) on the microstructure of alloys in the system Fe–C–B–Cr. The main goal is to examine the effect of W-additions on the microstructure and especially the potential stabilization of primary or eutectic borides in alloys with the compositions of Fe–0.4C–1B–2.5Cr + W. Thermodynamic equilibrium and Scheil–Gulliver calculations are performed to identify microstructurally significant alloy-compositions which are also devoid of borocarbides at austenitizing temperature. Accordingly, laboratory melts are cast, samples are swaged, austenitized, quenched and tempered. Additionaly, a near-equilibrium state is created by a diffusion annealing step to validate the equilibrium calculation. The resulting microstructures are characterized by X-ray diffraction, scanning electron microscopy. It is shown that swaging can effectively convert the eutectic network into a powder-metallurgical-like spherical and isotropic hard phase dispersion without introducing microscopic or macroscopic defects. W-additions lead to the stabilization of eutectic FeWB and B-rich M23(B,C)6 carboborides as opposed to C-rich M23(C,B)6 formed in the quarternary Fe–C–B–Cr system. Thus, the chemical binding of B in M23(B,C)6 leads to a significant destabilization of the M2B-type borides FeWB and (Fe,Cr)2B. The results show that W-addition strongly influences the solidification reaction of Fe–Cr–C–B–W alloys and thus the present phases, even after diffusion annealing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. H. Berns and W. Theisen: Eisenwerkstoffe - Stahl und Gusseisen, 4th ed. Springer, Berlin, 2008.
2. H.-J. Bargel and G. Schulze, eds.: Werkstoffkunde: Jetzt mit Aufgaben und Lösungen, Springer Vieweg, Berlin, 2012.
3. DIN Deutsches Institut für Normung E.V.: Werkzeugstähle, DIN Deutsches Institut für Normung E.V., 2001, p. 4957.
4. H. Berns: Werkstoffkunde für gebräuchlichen Stähle, Teil 2: Kaltarbeitsstähle für Schneidwerkzeuge, Stahleisen, Düsseldorf, 1977, pp. 205–13.
5. E. Heinrich, ed.: Die Werkzeugstähle: Unlegierte und legierte Werkzeugstähle, ihre Zusammensetzung, Eigenschaften, Herstellung und Behandlung, mit einem Anhang über „Schneidmetalle“, Springer, Berlin, 1964.
6. A. Kulmburg: Das Gefüge der Werkzeugstähle: Ein Überblick für den Praktiker. Teil 2: Besonderheiten des Gefüges der einzelnen Stahlgruppen, Graz, 1998.10.1515/pm-1998-350505 ↗
7. U. Baudis and R. Fichte: Ullmann’s Encyclopedia of Industrial Chemistry, Wiley, Chichester, 2010.
8. H. Berns, ed.: Hartlegierungen und Hartverbundwerkstoffe: Gefüge, Eigenschaften, Bearbeitung, Anwendung, Springer, Berlin, 1998.10.1007/978-3-642-51505-7 ↗
9. W. Schedler, ed.: Hartmetall für den Praktiker: Aufbau, Herstellung, Eigenschaften und industrielle Anwendung einer modernen Werkstoffgruppe, VDI-Verl, Düsseldorf, 1988.
10. J. Lentz: Werkstofftechnische Charakterisierung untereutektischer Legierungen im System Fe-C-B-X, 1st ed. Ruhr-Universität Bochum - Lehrstuhl Werkstofftechnik, Bochum, 2018.
11. B. Aronsson, T. Lundström, and I. Engström: Anisotropy in Single-Crystal Refractory Compounds, F.W. Vahldiek and S.A. Mersol, eds., Springer, Boston, 1968, pp. 3–22.10.1007/978-1-4899-5307-0_1 ↗
12. D. Kotzott, M. Ade, and H. Hillebrecht: Solid State Sci., 2008, vol. 10, pp. 291–302.10.1016/j.solidstatesciences.2007.09.014 ↗
13. S. Karagöz, H.-O. Andrén, and H. Fischmeister: J. Phys. Colloques, 1987, vol. 48, C6-405–C6-410.10.1051/jphyscol:1987666 ↗
14. N. Wulbieter: Verschleißbeständige PM-Werkzeugstähle für den Einsatz bei erhöhter Betriebstemperatur, Eigenverlag des Lehrstuhls Werkstofftechnik der Ruhr-Universität Bochum, Bochum, 2019.
15. Y. Azakli and M. Tarakci: Surf. Eng., 2018, vol. 34, pp. 226–34.10.1080/02670844.2016.1263712 ↗
16. Y. Liu, H. Fu, W. Li, J. Xing, Y. Li, and B. Zheng: J. Mater. Res., 2018, vol. 33, pp. 3665–76.10.1557/jmr.2018.207 ↗
17. J.M. Marshall, F. Tang, Y. Han, P. Bagot, and M.P. Moody: Nucl. Mater. Energy, 2022, vol. 33, 101285.10.1016/j.nme.2022.101285 ↗
18. J. Li, J. Li, C. Li, and Y. Liu: Int. J. Refract. Met. Hard Mater., 2014, vol. 46, pp. 80–83.10.1016/j.ijrmhm.2014.05.011 ↗
19. W. Jeitschko: Acta Crystallogr. B, 1968, vol. 24, pp. 930–34.10.1107/S0567740868003432 ↗
20. H. Nowotny, H. Hascke, and F. Benesovsky: Bor-reiche Wolframboride. Monatsh Chem., 1967, vol. 98, pp. 547–54.10.1007/BF00901362 ↗
21. F. Halla and W. Thury: Z. Anorg. Allg. Chem., 1942, vol. 249, pp. 229–37.10.1002/zaac.19422490301 ↗
22. Z. Huang, J. Xing, and L. Lv: Mater. Charact., 2013, vol. 75, pp. 63–68.10.1016/j.matchar.2012.09.007 ↗
23. H. Schaefer, S. Weber, and J. Lentz: Berg Huettenmaenn Monatsh, 2024, vol. 169, pp. 154–60.10.1007/s00501-024-01436-w ↗
24. DIN Deutsches Institut für Normung E.V., Mikrobereichsanalyse – Elektronenstrahl-Mikroanalyse – Leitfaden für die Bestimmung des Kohlenstoffgehalts von Stählen mittels einer Kalibrierkurven-Methode, DIN Deutsches Institut für Normung E.V., 2015, p. 16592.
25. S. Benito, N. Wulbieter, F. Pöhl, and W. Theisen: J. Mater. Eng. Perform., 2019, vol. 28, pp. 2919–36.10.1007/s11665-019-04036-9 ↗
26. P.E. Busby, M.E. Warga, and C. Wells: JOM, 1953, vol. 5, pp. 1463–68.10.1007/BF03397637 ↗
27. D. Zhuang, Y. Liu, N. Jin, J. Li, Z. Cao, and J. Zhang: Mater. Res. Express, 2021, vol. 8, p. 46405.
28. J. Lentz, A. Röttger, and W. Theisen: Steel Res. Int., 2020, vol. 91, p. 31.10.1002/srin.201900416 ↗
29. N.I. Medvedeva, D.C. van Aken, and J.E. Medvedeva: Comput. Mater. Sci., 2015, vol. 96, pp. 159–64.10.1016/j.commatsci.2014.09.016 ↗
30. W. Trojahn: Gefüge und Eigenschaften ledeburitischer Chromstähle mit Niob und Titan. Dissertation, Bochum, 1985.
31. G. Laplanche, O. Horst, F. Otto, G. Eggeler, and E.P. George: J. Alloy. Compd., 2015, vol. 647, pp. 548–57.10.1016/j.jallcom.2015.05.129 ↗
32. S. Chen, X. Jin, and L. Rong: Mater. Sci. Eng. A, 2015, vol. 631, pp. 139–43.10.1016/j.msea.2015.02.044 ↗
33. D. Panov, E. Kudryavtsev, S. Naumov, D. Klimenko, R. Chernichenko, V. Mirontsov, N. Stepanov, S. Zherebtsov, G. Salishchev, and A. Pertcev: Materials (Basel, Switzerland), 2023, vol. 16, p. 1706.10.3390/ma16041706 ↗
34. D. Panov, R. Chernichenko, E. Kudryavtsev, D. Klimenko, S. Naumov, and A. Pertcev: Materials (Basel, Switzerland), 2022, vol. 15, 2468.10.3390/ma15072468 ↗
35. W. Feng, Z. Wang, Q. Sun, Y. He, and Y. Sun: J. Market. Res., 2022, vol. 19, pp. 2470–82.
36. X. Zhou, M. Wang, C. Chen, and H. Zhao: Steel Res. Int., 2016, vol. 87, pp. 1648–56.10.1002/srin.201600041 ↗