journal article·2024-01Open access

Near-Surface Layer Perforations as Precursors to Fracture in Accumulative Roll Bonding of a Multilayered Metal Composite

L. V. Semenchenko, R. M. Mier, N. S. Muyanja, M. J. Demkowicz

Abstract

We use micro-computed tomography (µ-CT) to characterize the sizes, shapes, and locations of layer perforation (LP) defects in laminates of copper (Cu) and tantalum (Ta) processed by accumulative roll bonding (ARB). One—termed Cu/Ta—was processed from an initial stacking of seven alternating Cu and Ta sheets, with the exterior sheets being Cu. In the other—termed Ta/Cu—the exterior sheets are Ta. Cu/Ta remained intact during processing and exhibits an approximately uniform spatial distribution of LPs. By contrast, Ta/Cu fractured by longitudinal splitting. LPs in this latter sample are concentrated near the sample surfaces. Moreover, their density increases with decreasing distance to the fracture surface. These findings show that materials undergoing ARB may remain intact, despite profuse formation of LPs, provided that the LPs are uniformly distributed. However, a non-uniform distribution of LPs is correlated with longitudinal splitting.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
2. A.R. Eivani, A. Shojaei, M.T. Salehi, H.R. Jafarian, and N. Park: J. Market. Res., 2021, vol. 10, pp. 291–305.
3. R. Jamaati and M.R. Toroghinejad: Mater. Design 2010, vol. 31, pp. 4508–13.10.1016/j.matdes.2010.04.022 ↗
4. M.C. Chen, H.C. Hsieh, and W. Wu: J. Alloys Compds., 2006, vol. 416, pp. 169–72.10.1016/j.jallcom.2005.09.017 ↗
5. T. Wang, H. Nie, Y. Mi, X. Hao, F. Yang, C. Chi, and W. Liang: J. Mater. Res., 2019, vol. 34, pp. 344–53.10.1557/jmr.2018.428 ↗
6. D. C. C. Magalhães, J. B. Rubert, O. M. Cintho, V. L. Sordi, and A. M. Kliauga: Frontiers in Materials 2020, vol. 7.10.3389/fmats.2020.600162 ↗
7. M. Tayyebi and B. Eghbali: Int. J. Miner. Metall. Mater., 2018, vol. 25, pp. 357–64.10.1007/s12613-018-1579-6 ↗
8. T. Hausöl, H.W. Höppel, and M. Göken: Materialwiss. Werkstofftech., 2012, vol. 43, pp. 334–39.10.1002/mawe.201200950 ↗
9. T. Nizolek, N.A. Mara, I.J. Beyerlein, J.T. Avallone, J.E. Scott, and T.M. Pollock: Metallogr. Microstruct. Anal., 2014, vol. 3, pp. 470–76.10.1007/s13632-014-0172-2 ↗
10. C. Ding, Xu. Jie, D. Shan, B. Guo, and T.G. Langdon: Composite B, 2021, vol. 211, p. 108662.10.1016/j.compositesb.2021.108662 ↗
11. A. Misra, M.J. Demkowicz, X. Zhang, and R.G. Hoagland: JOM, 2007, vol. 59, pp. 62–65.10.1007/s11837-007-0120-6 ↗
12. Nathan A. Mara and Irene J. Beyerlein: In Special Section: Ultrafinegrained Materials; Guest Editors: Suveen N. Mathaudhu, Yuri Estrin, Zenji Horita, Enrique Lavernia, Xiao Zhou Liao, Lei Lu, Qiuming Wei, Gerhard Wilde, and Yun Tian Zhu, Kluwer Academic Publishers: 2014, pp 6497-516.
13. Dinh Cuong Tran, Nicolas Tardif, and Ali Limam: International Journal of Solids and Structures 2015, vol. 69-70, pp. 343-49.10.1016/j.ijsolstr.2015.05.017 ↗
14. J.T. Avallone, T.J. Nizolek, B.B. Bales, and T.M. Pollock: Acta Mater., 2019, vol. 176, pp. 189–98.10.1016/j.actamat.2019.06.029 ↗
15. C. Ding, Xu. Jie, X. Li, D. Shan, B. Guo, and T.G. Langdon: Adv. Eng. Mater., 2020, vol. 22, p. 1900702.10.1002/adem.201900702 ↗
16. L.F. Zeng, R. Gao, Q.F. Fang, X.P. Wang, Z.M. Xie, S. Miao, T. Hao, and T. Zhang: Acta Mater., 2016, vol. 110, pp. 341–51.10.1016/j.actamat.2016.03.034 ↗
17. D. Yang, P. Cizek, P. Hodgson, and C. Wen: Scr. Mater., 2010, vol. 62, pp. 321–24.10.1016/j.scriptamat.2009.11.036 ↗
18. C.W. Schmidt, M. Ruppert, H.W. Hoppel, F. Nachtrab, A. Dietrich, R. Hanke, and M. Goken: Adv. Eng. Mater., 2012, vol. 14, pp. 1009–017.10.1002/adem.201200046 ↗
19. H. Wu, G.H. Fan, M. Huang, L. Geng, X.P. Cui, R.C. Chen, and G.Y. Peng: Compos. Struct., 2017, vol. 163, pp. 123–28.10.1016/j.compstruct.2016.12.036 ↗
20. K.M.M. Rahman, J. Szpunar, M.R. Toroghinejad, and G. Belev: J. Compos. Mater., 2019, vol. 53, pp. 1215–27.10.1177/0021998318796177 ↗
21. B. Dodd and P. Boddington: J. Mech. Work. Technol., 1980, vol. 3, pp. 239–52.10.1016/0378-3804(80)90045-5 ↗
22. Franz Dieter Fischer, Nikolaus Friedl, Andreas Noé, and Franz G. Rammerstorfer: steel research international 2005, vol. 76, pp. 327-35.10.1002/srin.200506016 ↗
23. I.W. Chen, E.J. Winn, and M. Menon: Mater. Sci. Eng. A, 2001, vol. 317, pp. 226–35.10.1016/S0921-5093(01)01161-3 ↗
24. S.R. Chen and G.T. Gray: Metall. Mater. Trans. A, 1996, vol. 27, pp. 2994–3006.10.1007/BF02663849 ↗
25. S. Nemat-Nasser and Y.L. Li: Acta Mater., 1998, vol. 46, pp. 565–77.10.1016/S1359-6454(97)00230-9 ↗
26. M. Ardeljan, M. Knezevic, T. Nizolek, I.J. Beyerlein, N.A. Mara, and T.M. Pollock: Int. J. Plast., 2015, vol. 74, pp. 35–57.10.1016/j.ijplas.2015.06.003 ↗
27. J.M. Lee, B.R. Lee, and S.B. Kang: Mater. Sci. Eng. A, 2005, vol. 406, pp. 95–101.10.1016/j.msea.2005.06.030 ↗
28. M. Rahdari, M. Reihanian, and S.M.L. Baghal: Mater. Sci. Eng. A, 2018, vol. 738, pp. 98–110.10.1016/j.msea.2018.09.080 ↗
29. N.V. Govindaraj, J.G. Frydendahl, and B. Holmedal: Mater. Des., 2013, vol. 52, pp. 905–15.10.1016/j.matdes.2013.06.031 ↗