Carbon in Solution and the Charpy Impact Performance of Medium Mn Steels
Source abstract
Abstract
Abstract Carbon is a well known austenite stabiliser and can be used to alter the stacking fault energy and stability against martensitic transformation in medium Mn steels, producing a range of deformation mechanisms such as the Transformation Induced Plasticity (TRIP) or combined Twinning and Transformation Induced Plasticity (TWIP + TRIP) effects. However, the effect of C beyond quasi-static tensile behaviour is less well known. Therefore, two medium Mn steels with 0.2 and 0.5 wt pct C were designed to produce similar austenite fractions and stability and therefore tensile behaviour. These were processed to form lamellar and mixed equiaxed + lamellar microstructures. The low C steel had a corrected Charpy impact energy (KV$$10$$) of 320 J cm$$-2$$ compared to 66 J cm$$-2$$ in the high C steel despite both having a ductility of over 35 pct. Interface segregation, e.g., of tramp elements, was investigated as a potential cause and none was found. Only a small amount of Mn rejection from partitioning was observed at the interface. The fracture surfaces were investigated and the TRIP effect was found to occur more readily in the Low C Charpy specimen. Therefore it is concluded that the use of C to promote TWIP + TRIP behaviour should be avoided in alloy design but the Charpy impact performance can be understood purely in terms of C in solution.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. R.L. Miller: Metall. Mater. Trans. B, 1972, vol. 3B, pp. 905–12.10.1007/BF02647665 ↗
2. X. Xu, T.W.J. Kwok, P. Gong, and D. Dye: Materialia, 2022, vol. 22, 101422.10.1016/j.mtla.2022.101422 ↗
3. Z.C. Li, X.J. Li, Y.J. Mou, R.D. Misra, H. Ding, L.F. He, and H.P. Li: Mater. Sci. Technol., 2020, vol. 36(12), pp. 1308–17.10.1080/02670836.2020.1777650 ↗
4. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6039–52.10.1007/s11661-014-2540-6 ↗
5. S. Lee, K. Lee, and B.C. De Cooman: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2356–63.10.1007/s11661-015-2854-z ↗
6. S.S. Sohn, H. Song, J.H. Kwak, and S. Lee: Sci. Rep., 2017, vol. 7, p. 1927.10.1038/s41598-017-02183-4 ↗
7. T.W.J. Kwok, P. Gong, R. Rose, and D. Dye: Mater. Sci. Eng. A, 2022, vol. 855, 143864.10.1016/j.msea.2022.143864 ↗
8. V. Savic, L. Hector, H. Singh, M. Paramasuwom, U. Basu, A. Basudhar, and N. Stander: SAE Int. J. Mater. Manuf., 2018, vol. 11, pp. 303–13.10.4271/2018-01-1026 ↗
9. D. Krizan, K. Steineder, R. Schenider, C. Béal, C. Sommitsch, and T. Hebesberger: 20th Anniversary Int. Conf. Transfer, 2019.
10. T. Taylor and A. Clough: Mater. Sci. Technol., 2018, vol. 34(7), pp. 809–61.10.1080/02670836.2018.1425239 ↗
11. D.W. Fan, H.S. Kim, and B.C. De Cooman: Steel Res. Int., 2009, vol. 80(3), pp. 241–48.
12. K. Olsson, M. Gladh, J.E. Hedin, and J. Larsson: Adv. Mater. Processes, 2006, vol. 164(8), pp. 44–46.
13. B. Hu, H. Luo, F. Yang, and H. Dong: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1457–64.10.1016/j.jmst.2017.06.017 ↗
14. Y. Ma: Mater. Sci. Technol., 2017, vol. 33(15), pp. 1713–27.10.1080/02670836.2017.1312208 ↗
15. K.M. Rahman, V.A. Vorontsov, and D. Dye: Mater. Sci. Eng. A, 2014, vol. 589, pp. 252–61.10.1016/j.msea.2013.09.081 ↗
16. R. Rana, E. De Moor, J.G. Speer, and D.K. Matlock: Jom, 2018, vol. 70(5), pp. 706–13.10.1007/s11837-018-2779-2 ↗
17. E. Lucon: J. Res. Nat. Inst. Stand. Technol., 2016, vol. 121, pp. 165–79.10.6028/jres.121.007 ↗
18. K. Steineder, D. Krizan, R. Schneider, C. Béal, and C. Sommitsch: Acta Mater., 2017, vol. 139, pp. 39–50.10.1016/j.actamat.2017.07.056 ↗
19. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107(2–3), pp. 131–39.10.1016/j.ultramic.2006.06.008 ↗
20. B.M. Jenkins, J.O. Douglas, H.M. Gardner, D. Tweddle, A. Kareer, P.S. Karamched, N. Riddle, J.M. Hyde, P.A. Bagot, G.R. Odette, and M.P. Moody: Appl. Surf. Sci., 2020, vol. 528, p. 147011.10.1016/j.apsusc.2020.147011 ↗
21. A. Dumay, J.P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A, 2008, vol. 483–484, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
22. T.W.J. Kwok, P. Gong, X. Xu, J. Nutter, W.M. Rainforth, and D. Dye: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 597–609.10.1007/s11661-021-06534-9 ↗
23. R. Rana and S. Singh: Automotive Steels: Design, Mellaurgy, Processing and Applications, Woodhead Publishing, Sawston, 2016.
24. L. Liu, Z.G. Yang, C. Zhang, and W.B. Liu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7204–09.10.1016/j.msea.2010.07.083 ↗
25. M.T. Kim, T.M. Park, K.H. Baik, W.S. Choi, and J. Han: Mater. Sci. Eng., A, 2019, vol. 752, pp. 43–54.10.1016/j.msea.2019.02.091 ↗
26. K. Wallin: Int. J. Press. Vessels Pip., 2001, vol. 78(7), pp. 463–70.10.1016/S0308-0161(01)00063-1 ↗
27. Y.J. Chao, J.D. Ward, and R.G. Sands: Mater. Des., 2007, vol. 28, pp. 551–57.10.1016/j.matdes.2005.08.009 ↗
28. J. Han, A.K. da Silva, D. Ponge, D. Raabe, S.M. Lee, Y.K. Lee, S.I. Lee, and B. Hwang: Acta Mater., 2017, vol. 122, pp. 199–206.10.1016/j.actamat.2016.09.048 ↗
29. B. Sun, F. Fazeli, C. Scott, N. Brodusch, R. Gauvin, and S. Yue: Acta Mater., 2018, vol. 148, pp. 249–62.10.1016/j.actamat.2018.02.005 ↗
30. S. Kaar, K. Steineder, R. Schneider, D. Krizan, and C. Sommitsch: Scripta Mater., 2021, vol. 200, 113923.10.1016/j.scriptamat.2021.113923 ↗
31. T. Angel: J. Iron Steel Inst., 1954, vol. 5, pp. 165–75.
32. K. Nohara, Y. Ono, and N. Ohashi: J. Iron Steel Inst. Jpn., 1977, vol. 63(5), pp. 772–82.10.2355/tetsutohagane1955.63.5_772 ↗
33. T.W.J. Kwok, K.M. Rahman, X. Xu, I. Bantounas, J.F. Kelleher, S. Daswari, T. Alam, R. Banerjee, and D. Dye: Mater. Sci. Eng. A, 2020, vol. 782, 139258.10.1016/j.msea.2020.139258 ↗
34. R. Ding, Z. Dai, M. Huang, Z. Yang, C. Zhang, and H. Chen: Acta Mater., 2018, vol. 147, pp. 59–69.10.1016/j.actamat.2018.01.009 ↗
35. T.M. Link, B.M. Hance: in International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2017 pp. 19–30.
36. E. Ratte, S. Leonhardt, W. Bleck, M. Franzen, and P. Urban: Steel Res. Int., 2006, vol. 77(9–10), pp. 692–97.10.1002/srin.200606449 ↗
37. R. Zaera, J.A. Rodríguez-Martínez, G. Vadillo, and J. Fernández-Sáez: J. Mech. Phys. Solids, 2014, vol. 64(1), pp. 316–37.10.1016/j.jmps.2013.11.006 ↗
38. K.I. Sugimoto, H. Tanino, and J. Kobayashi: Steel Res. Int., 2015, vol. 86(10), pp. 1151–60.10.1002/srin.201400585 ↗
39. W. Cao, M. Zhang, C. Huang, S. Xiao, H. Dong, and Y. Weng: Sci. Rep., 2017, vol. 7, pp. 1–8.10.1038/s41598-016-0028-x ↗
40. Z. He, H. Liu, Z. Zhu, W. Zheng, Y. He, and L. Li: Materials, 2019, vol. 12(22), p. 3781.10.3390/ma12223781 ↗
41. S.M. Song, K. Sugimoto, M. Kobayashi, H. Matsubara, and T. Kashima: J. Iron Steel Inst. Jpn., 2000, vol. 86(8), pp. 563–68.10.2355/tetsutohagane1955.86.8_563 ↗
42. S. Zhang and K.O. Findley: Acta Mater., 2013, vol. 61, pp. 1895–1903.10.1016/j.actamat.2012.12.010 ↗
43. P. Jacques, Q. Furnémont, T. Pardoen, and F. Delannay: Acta Mater., 2001, vol. 49(1), pp. 139–52.10.1016/S1359-6454(00)00215-9 ↗
44. G. Roe, B. Bramfitt: ASM Handbook, Volume 1: Properties and Selection: Irons, Steels, and High-Performance Alloys, 1990, pp. 737–54.10.31399/asm.hb.v01.a0001040 ↗
45. M. Bordone, J. Perez-Ipina, R. Bolmaro, A. Artigas, and A. Monsalve: Metals, 2021, vol. 11(1), pp. 1–6.
46. B. Hwang, T.H. Lee, and S.J. Kim: Philos. Mag. Lett., 2012, vol. 92(2), pp. 93–102.10.1080/09500839.2011.634841 ↗
47. V.L. De la Concepción, H.N. Lorusso, and H.G. Svoboda: Procedia Mater. Sci., 2015, vol. 8, pp. 1047–56.10.1016/j.mspro.2015.04.167 ↗
48. G. Gao, B. Gao, X. Gui, J. Hu, J. He, Z. Tan, and B. Bai: Mater. Sci. Eng. A, 2019, vol. 753, pp. 1–10.10.1016/j.msea.2019.03.018 ↗
49. G. Speich and H. Warlimont: J. Iron Steel Inst., 1968, vol. 206(4), pp. 385–92.
50. J.J. Sun, Y.N. Liu, Y.T. Zhu, F.L. Lian, H.J. Liu, T. Jiang, S.W. Guo, W.Q. Liu, and X.B. Ren: Sci. Rep., 2017, vol. 7(1), pp. 1–7.10.1038/s41598-016-0028-x ↗
51. M.T. Kim, T.M. Park, K.H. Baik, W.S. Choi, P.P. Choi, and J. Han: Acta Mater., 2019, vol. 164, pp. 122–34.10.1016/j.actamat.2018.10.043 ↗