Residual Stress Gradient Built in X40CrMoVN16-2 Austenitic Steel Cube Manufactured by Laser Powder Bed Fusion
Source abstract
Abstract
International audience ; Additive manufacturing processes and especially the family of laser powder bed fusion technologies have a great industrial potential since it enables, from metal powder beds, to produce full density complex monolithic parts. The high-temperature gradient resulting from the locally concentrated energy input leads to strong temperature fields driving non-negligible residual stress gradients, part deformations and crack formation. Resulting stress and texture gradients arise from the interdependent physical phenomena (metallurgical, thermal, mechanical and fluid mechanics) occurring during the process. Present work focuses on the residual stress being built in an austenitic stainless steel cubical shaped part of 1 cm side, prepared by a laser powder bed fusion process from a gas-atomized metallic powder (from martensitic X40CrMoVN16-2 stainless steel), through a full residual stress tensor mapping achieved thanks to neutron diffraction. Stress analyses incorporate morphological and crystallographic textures, as well as elastic anisotropy. Components of the principal stress tensor display compressive values close to the baseplate that develop into low compression, and a tensile stress state at the subsurface (surrounding thermal history effects). Results also underline the strong impact of matter environment (and thus thermal environment) onto stress gradient magnitude and the complex loading origins of the residual stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. W.E. Frazier: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1917–28.10.1007/s11665-014-0958-z ↗
2. K.V. Wong and A. Hernandez: ISRN Mech. Eng., 2012, vol. 2012, pp. 1–10.10.5402/2012/208760 ↗
3. L.E. Murr, S.M. Gaytan, F. Medina, H. Lopez, E. Martinez, B.I. Machado, D.H. Hernandez, L. Martinez, M.I. Lopez, R.B. Wicker, and J. Bracke: Philos. Trans. R. Soc. A, 2010, vol. 368, pp. 1999–2032.10.1098/rsta.2010.0010 ↗
4. A. Uriondo, M. Esperon-Miguez, and S. Perinpanayagam: Proc. Inst. Mech. Eng. Part G, 2015, vol. 229, pp. 2132–47.10.1177/0954410014568797 ↗
5. S.H. Huang, P. Liu, A. Mokasdar, and L. Hou: Int. J. Adv. Manuf. Technol., 2013, vol. 67, pp. 1191–1203.10.1007/s00170-012-4558-5 ↗
6. C.Y. Yap, C.K. Chua, Z.L. Dong, Z.H. Liu, D.Q. Zhang, L.E. Loh, and S.L. Sing: Appl. Phys. Rev., 2015, vol. 2, pp. 1–21.10.1063/1.4935926 ↗
7. Y. Wang, K.M. Yu, and C.C.L. Wang: CAD Comput. Aided Des., 2015, vol. 63, pp. 1–11.10.1016/j.cad.2014.11.012 ↗
8. J.P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts, and B. Lauwers: J. Mater. Process. Technol., 2004, vol. 149, pp. 616–22.10.1016/j.jmatprotec.2003.11.051 ↗
9. D.W. Brown, J.D. Bernardin, J.S. Carpenter, B. Clausen, D. Spernjak, and J.M. Thompson: Mater. Sci. Eng. A, 2016, vol. 678, pp. 291–98.10.1016/j.msea.2016.09.086 ↗
10. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann: Acta Mater., 2016, vol. 117, pp. 371–92.10.1016/j.actamat.2016.07.019 ↗
11. H.E. Sabzi and P.E.J. Rivera-Díaz-del-Castillo: Materials, 2019, vol. 12, p. 3791.10.3390/ma12223791 ↗
12. J.L. Bartlett and X. Li: Addit. Manuf., 2019, vol. 27, pp. 131–49.
13. P.J. Withers: Rep. Prog. Phys., 2007, vol. 70, pp. 2211–64.10.1088/0034-4885/70/12/R04 ↗
14. V. (Viktor) Hauk: Structural and Residual Stress Analysis by Nondestructive Methods. Elsevier, Amsterdam, 1997.
15. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355–65.10.1179/026708301101509980 ↗
16. C. Li, Z.Y. Liu, X.Y. Fang, and Y.B. Guo: Procedia CIRP, 2018, vol. 71, pp. 348–53.10.1016/j.procir.2018.05.039 ↗
17. P. Mercelis and J.P. Kruth: Rapid Prototyp. J., 2006, vol. 12, pp. 254–65.10.1108/13552540610707013 ↗
18. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
19. L. Pintschovius, V. Jung, E. Macherauch, and O. Vöhringer: Mater. Sci. Eng., 1983, vol. 61, pp. 43–50.10.1016/0025-5416(83)90124-6 ↗
20. D. Gloaguen, B. Girault, B. Courant, P.-A. Dubos, M.-J. Moya, F. Edy, and J. Rebelo Kornmeier: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 951–61.10.1007/s11661-019-05538-w ↗
21. T. Fritsch, M. Sprengel, A. Evans, L. Farahbod-Sternahl, R. Saliwan-Neumann, M. Hofmann, and G. Bruno: J. Appl. Crystallogr., 2021, vol. 54, pp. 228–36.10.1107/S1600576720015344 ↗
22. F. Bayerlein, F. Bodensteiner, C. Zeller, M. Hofmann, and M.F. Zaeh: Addit. Manuf., 2018, vol. 24, pp. 587–94.
23. H. Jones: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 104–11.10.1016/j.msea.2003.10.077 ↗
24. J. Dunkley Dr: in Advances in Powder Metallurgy: Properties, Processing and Applications, Elsevier Inc., Amsterdam, 2013, pp. 3–18.10.1533/9780857098900.1.3 ↗
25. A.V. Gusarov and I. Smurov: Phys. Procedia, 2010, vol. 5, pp. 381–94.10.1016/j.phpro.2010.08.065 ↗
26. W.E. King, H.D. Barth, V.M. Castillo, G.F. Gallegos, J.W. Gibbs, D.E. Hahn, C. Kamath, and A.M. Rubenchik: J. Mater. Process. Technol., 2014, vol. 214, pp. 2915–25.10.1016/j.jmatprotec.2014.06.005 ↗
27. J.R. Santisteban, M.R. Daymond, J.A. James, and L. Edwards: J. Appl. Crystallogr., 2006, vol. 39, pp. 812–25.10.1107/S0021889806042245 ↗
28. P.J. Withers, M. Preuss, A. Steuwer, and J.W.L. Pang: J. Appl. Crystallogr., 2007, vol. 40, pp. 891–904.10.1107/S0021889807030269 ↗
29. W. Kockelmann, L.C. Chapon, and P.G. Radaelli: Phys. B, 2006, vol. 385–386, pp. 639–43.10.1016/j.physb.2006.06.091 ↗
30. A.C. Hannon: Nucl. Instrum. Methods Phys. Res. Sect. A, 2005, vol. 551, pp. 88–107.10.1016/j.nima.2005.07.053 ↗
31. H.R. Wenk, S. Matthies, J. Donovan, and D. Chateigner: J. Appl. Crystallogr., 1998, vol. 31, pp. 262–69.10.1107/S002188989700811X ↗
32. T. Simson, A. Emmel, A. Dwars, and J. Böhm: Addit. Manuf., 2017, vol. 17, pp. 183–89.
33. A. Baczmański, N. Hfaiedh, M. François, and K. Wierzbanowski: Mater. Sci. Eng. A, 2009, vol. 501, pp. 153–65.10.1016/j.msea.2008.09.072 ↗
34. H. Dölle and V. Hauk: Int. J. Mater. Res., 1978, vol. 69, pp. 410–17.10.1515/ijmr-1978-690609 ↗
35. D. Gloaguen, T. Berchi, E. Girard, and R. Guillén: J. Nucl. Mater., 2008, vol. 374, pp. 138–46.10.1016/j.jnucmat.2007.07.017 ↗
36. V. Hounkpati, S. Fréour, D. Gloaguen, V. Legrand, J. Kelleher, W. Kockelmann, and S. Kabra: Acta Mater., 2016, vol. 109, pp. 341–52.10.1016/j.actamat.2016.02.065 ↗
37. T. Lorentzen and T. Leffers: Measurement of Residual and Applied Stress Using Neutron Diffraction, Springer, Dordrecht, 1992, pp. 253–61.10.1007/978-94-011-2797-4_16 ↗
38. B. Clausen, T. Lorentzen, and T. Leffers: Acta Mater., 1998, vol. 46, pp. 3087–98.10.1016/S1359-6454(98)00014-7 ↗
39. J.D. Eshelby: Proc. R. Soc. Lond. Ser. A. Math. Phys. Sci., 1957, vol. 241, pp. 376–96.
40. E. Kröner: Zeitschrift für Phys., 1958, vol. 151, pp. 504–18.10.1007/BF01337948 ↗
41. H.-R. Wenk and P. Van Houtte: Reports. Prog. Phys., 2004, vol. 67, pp. 1367–1428.10.1088/0034-4885/67/8/R02 ↗
42. Y.J. Liu, Q. Sun, X.L. Fan, and T. Suo: Mater. Sci. Eng. A, 2013, vol. 576, pp. 337–45.10.1016/j.msea.2013.04.013 ↗
43. K. Kempen, E. Yasa, L. Thijs, J.P. Kruth, and J. Van Humbeeck: Phys. Procedia, 2011, vol. 12, pp. 255–63.10.1016/j.phpro.2011.03.033 ↗
44. Z. Hu, H. Zhu, H. Zhang, and X. Zeng: Opt. Laser Technol., 2017, vol. 87, pp. 17–25.10.1016/j.optlastec.2016.07.012 ↗
45. R. Mertens, B. Vrancken, N. Holmstock, Y. Kinds, J.-P. Kruth, and J. Van Humbeeck: Phys. Procedia, 2016, vol. 83, pp. 882–90.10.1016/j.phpro.2016.08.092 ↗
46. A. Bénéteau, P. Weisbecker, G. Geandier, E. Aeby-Gautier, and B. Appolaire: Mater. Sci. Eng. A, 2005, vol. 393, pp. 63–70.10.1016/j.msea.2004.09.054 ↗
47. J.C. Zhao and M.R. Notis: Mater. Sci. Eng. R, 1995, vol. 15, pp. 135–207.10.1016/0927-796X(95)00183-2 ↗
48. R.M. German: Mater. Des., 1984, vol. 5, p. 294.
49. T. Vilaro, C. Colin, and J.D. Bartout: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3190–99.10.1007/s11661-011-0731-y ↗
50. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Sciences Publishers, London, 1978.
51. J.A. Brooks and A.W. Thompson: Int. Mater. Rev., 1991, vol. 36, pp. 16–44.10.1179/imr.1991.36.1.16 ↗
52. S. Astafurov and E. Astafurova: Metals, 2021, vol. 11, p. 1052.10.3390/met11071052 ↗
53. Q. Saby, J.-Y. Buffière, E. Maire, T. Joffre, J. Bajolet, S. Garabédian, P. Vikner, and X. Boulnat: Addit. Manuf., 2021, vol. 44, 102031.
54. J.P. Oliveira, T.G. Santos, and R.M. Miranda: Prog. Mater. Sci., 2020, vol. 107, 100590.10.1016/j.pmatsci.2019.100590 ↗
55. H.L. Wei, J. Mazumder, and T. DebRoy: Sci. Rep., 2015, vol. 5, pp. 1–7.
56. S. Cooke, K. Ahmadi, S. Willerth, and R. Herring: J. Manuf. Process., 2020, vol. 57, pp. 978–1003.10.1016/j.jmapro.2020.07.025 ↗
57. M. Sanjari, A. Hadadzadeh, H. Pirgazi, A. Shahriari, B.S. Amirkhiz, L.A.I. Kestens, and M. Mohammadi: Mater. Sci. Eng. A, 2020, vol. 786, 139365.10.1016/j.msea.2020.139365 ↗
58. P. Bajaj, A. Hariharan, A. Kini, P. Kürnsteiner, D. Raabe, and E.A. Jägle: Mater. Sci. Eng. A, 2020, vol. 772, 138633.10.1016/j.msea.2019.138633 ↗
59. A. Basak and S. Das: Annu. Rev. Mater. Res., 2016, vol. 46, pp. 125–49.10.1146/annurev-matsci-070115-031728 ↗
60. P. Krakhmalev, G. Fredriksson, K. Svensson, I. Yadroitsev, I. Yadroitsava, M. Thuvander, and R. Peng: Metals, 2018, vol. 8, p. 643.10.3390/met8080643 ↗
61. F. Geiger, K. Kunze, and T. Etter: Mater. Sci. Eng. A, 2016, vol. 661, pp. 240–46.10.1016/j.msea.2016.03.036 ↗
62. I. Serrano-Munoz, T. Mishurova, T. Thiede, M. Sprengel, A. Kromm, N. Nadammal, G. Nolze, R. Saliwan-Neumann, A. Evans, and G. Bruno: Sci. Rep., 2020, vol. 10, p. 14645.10.1038/s41598-020-71112-9 ↗
63. T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster, and D. Schwarze: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 794–96.10.1007/s11663-013-9875-z ↗
64. A. Röttger, K. Geenen, M. Windmann, F. Binner, and W. Theisen: Mater. Sci. Eng. A, 2016, vol. 678, pp. 365–76.10.1016/j.msea.2016.10.012 ↗
65. R. Casati, J. Lemke, and M. Vedani: J. Mater. Sci. Technol., 2016, vol. 32, pp. 738–44.10.1016/j.jmst.2016.06.016 ↗
66. S. Bahl, S. Mishra, K.U. Yazar, I.R. Kola, K. Chatterjee, and S. Suwas: Addit. Manuf., 2019, vol. 28, pp. 65–77.
67. J. Zhao, J. Hou, L. Chen, B. Dai, X. Xiong, L. Tan, K. Zhang, and A. Huang: Mater. Today Commun., 2020, vol. 25, 101299.10.1016/j.mtcomm.2020.101299 ↗
68. J. Hou, W. Chen, Z. Chen, K. Zhang, and A. Huang: J. Mater. Sci. Technol., 2020, vol. 48, pp. 63–71.10.1016/j.jmst.2020.01.011 ↗
69. H. Yu, J. Yang, J. Yin, Z. Wang, and X. Zeng: Mater. Sci. Eng. A, 2017, vol. 695, pp. 92–100.10.1016/j.msea.2017.04.031 ↗
70. N.E. Hodge, R.M. Ferencz, and J.M. Solberg: Comput. Mech., 2014, vol. 54, pp. 33–51.10.1007/s00466-014-1024-2 ↗
71. I. Tolosa, F. Garciandía, F. Zubiri, F. Zapirain, and A. Esnaola: Int. J. Adv. Manuf. Technol., 2010, vol. 51, pp. 639–47.10.1007/s00170-010-2631-5 ↗
72. O.O. Salman, F. Brenne, T. Niendorf, J. Eckert, K.G. Prashanth, T. He, and S. Scudino: J. Manuf. Process., 2019, vol. 45, pp. 255–61.10.1016/j.jmapro.2019.07.010 ↗
73. J. Robinson, I. Ashton, P. Fox, E. Jones, and C. Sutcliffe: Addit. Manuf., 2018, vol. 23, pp. 13–24.
74. B. Cheng, S. Shrestha, and K. Chou: Addit. Manuf., 2016, vol. 12, pp. 240–51.
75. J.-P. Kruth, J. Deckers, E. Yasa, and R. Wauthlé: Proc. Inst. Mech. Eng. Part B, 2012, vol. 226, pp. 980–91.10.1177/0954405412437085 ↗
76. L. Parry, I.A. Ashcroft, and R.D. Wildman: Addit. Manuf., 2016, vol. 12, pp. 1–15.
77. J.H. Robinson, I.R.T. Ashton, E. Jones, P. Fox, and C. Sutcliffe: Rapid Prototyp. J., 2019, vol. 25, pp. 289–98.10.1108/RPJ-06-2017-0111 ↗
78. M. Masoomi, N. Shamsaei, R.A. Winholtz, J.L. Milner, T. Gnäupel-Herold, A. Elwany, M. Mahmoudi, and S.M. Thompson: Data Br., 2017, vol. 13, pp. 408–14.10.1016/j.dib.2017.06.027 ↗
79. R.A. Winholtz and A.D. Krawitz: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1287–95.10.1007/BF02670622 ↗