Effect of V on the Hot Ductility Behavior of High-Strength Hot-Stamped Steels and Associated Microstructural Features
Source abstract
Abstract
The application of microalloying technology has been emerging as an effective method to enhance the strength-ductility synergy of high-strength hot-stamped steels, although the impact of microalloying elements on the hot ductility of hot-stamped steels remains an open question. In this work, we systematically studied the hot ductility behavior of V microalloyed hot-stamped steels, covering a broad temperature range from 650 °C to 1300 °C. It is found that a hot brittle range exists at testing temperatures ranging from 650 °C to 900 °C, with the hot ductility gradually decreasing between 900 °C and 650 °C. An increase in microalloying elements is not beneficial to hot ductility in this temperature range. Detailed microstructural analysis and thermodynamic calculation show that the deterioration of hot ductility from 900 °C to 650 °C is closely related to the formation of proeutectoid ferrite and nano-scaled precipitation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. J. Zhao and Z. Jiang: Prog. Mater. Sci., 2018, vol. 94, pp. 174–242.10.1016/j.pmatsci.2018.01.006 ↗
2. B.B. He, B. Hu, H.W. Yen, G.J. Cheng, Z.K. Wang, H.W. Luo, and M.X. Huang: Science, 2017, vol. 357, pp. 1029–32.10.1126/science.aan0177 ↗
3. Q. Lu, Q. Lai, Z. Chai, X. Wei, X. Xiong, H. Yi, M. Huang, W. Xu, and J. Wang: Sci. Adv., 2021, vol. 7, p. 0176.
4. O. Bouaziz, H. Zurob, and M. Huang: Steel Res. Int., 2013, vol. 84, pp. 937–47.10.1002/srin.201200288 ↗
5. E. Billur: Hot Stamping of Ultra High-Strength Steels: From a Technological and Business Perspective, Springer, Cham, 2019, pp. 7–9.10.1007/978-3-319-98870-2 ↗
6. J. Liang, H. Lu, L. Zhang, F. Li, R. Cao, K. Liu, H. Pan, H. Teng, X. Li, A. Guo, and Z. Zhao: Mater. Sci. Eng. A, 2021, vol. 801, p. 140419.10.1016/j.msea.2020.140419 ↗
7. H. Wu, B. Ju, D. Tang, R. Hu, A. Guo, Q. Kang, and D. Wang: Mater. Sci. Eng. A, 2015, vol. 622, pp. 61–66.10.1016/j.msea.2014.11.005 ↗
8. J. Yoo, M.C. Jo, M.C. Jo, S. Kim, S.H. Kim, J. Oh, S.S. Sohn, and S. Lee: Acta Mater., 2021, vol. 207, p. 116661.10.1016/j.actamat.2021.116661 ↗
9. Z. Cheng, S. Wang, J. Liu, R. Wu, J. Gao, H. Wu, T. Li, G. Wu, and X. Mao: Mater. Sci. Technol., 2023, 1–16.10.3390/ma16103799 ↗
10. K.M. Lekganyane, R.J. Mostert, C.W. Siyasiya, and K.M. Banks: Mater. Sci. Eng. A, 2021, vol. 810, p. 141007.10.1016/j.msea.2021.141007 ↗
11. R. A, C. Perlb, A. Ev, A. Rj, and D. Mek: Mater. Sci. Eng. A, 2020, vol. 772, p. 138691.
12. X. Jiang, X.M. Chen, S.H. Song, and Y.J. Shangguan: Mater. Sci. Eng. A, 2013, vol. 574, pp. 46–53.10.1016/j.msea.2013.02.072 ↗
13. H. Liu, J. Liu, B. Wu, Y. Shen, H. Yang, D. Hao, and X. Su: Mater. Sci. Eng. A, 2017, vol. 708, pp. 360–74.10.1016/j.msea.2017.10.001 ↗
14. J. Li and G. Cheng: J. Mater. Res. Technol., 2020, vol. 9, pp. 52–58.10.1016/j.jmrt.2019.10.028 ↗
15. C.H. Lee, J.Y. Park, J. Chung, D.B. Park, J.Y. Jang, S. Huh, S. JuKim, J.Y. Kang, J. Moon, and T.H. Lee: Mater. Sci. Eng. A, 2016, vol. 651, pp. 192–97.10.1016/j.msea.2015.11.006 ↗
16. B. Mintz, S. Yue, and J.J. Jonas: Int. Mater. Rev., 1991, vol. 36, pp. 187–220.10.1179/imr.1991.36.1.187 ↗
17. X. Jiang and S.H. Song: Mater. Sci. Eng. A, 2014, vol. 613, pp. 171–77.10.1016/j.msea.2014.06.094 ↗
18. Y. Wang, Q. Ren, L. Zhang, X. Yang, W. Yang, Y. Ren, and H. Zhang: Steel Res. Int., 2021, vol. 92, p. 2000649.10.1002/srin.202000649 ↗
19. M. Gontijo, C. Hoflehner, P. Estermann, S. Ilie, and C. Sommitsch: Steel Res. Int., 2020, vol. 91, p. 2000222.10.1002/srin.202000222 ↗
20. B. Mintz and D.N. Crowther: Int. Mater. Rev., 2010, vol. 55, pp. 168–96.10.1179/095066009X12572530170624 ↗
21. A.S. Hamada and L. Karjalainen: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1819–27.10.1016/j.msea.2010.11.030 ↗
22. K.R. Carpenter, R. Dippenaar, and C.R. Killmore: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 573–80.10.1007/s11661-008-9749-1 ↗
23. I. Mejía, A. Bedolla-Jacuinde, C. Maldonado, and J.M. Cabrera: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4468–74.10.1016/j.msea.2011.02.040 ↗
24. K.C. Cho, D.J. Mun, Y.M. Koo, and J.S. Lee: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3556–61.10.1016/j.msea.2011.01.097 ↗
25. Y. Liu, Y.H. Sun, and H.T. Wu: Int. J. Min. Met. Mater., 2021, vol. 28, pp. 1011–21.10.1007/s12613-020-2092-2 ↗
26. I. Mejia, A.E. Salas-Reyes, J. Calvo, and J.M. Cabrera: Mater. Sci. Eng. A, 2015, vol. 648, pp. 311–29.10.1016/j.msea.2015.09.079 ↗
27. I. Mejía, E.A. Salas-Reyes, A. Bedolla-Jacuinde, J. Calvo, and M.J. Cabrera: Mater. Sci. Eng. A, 2014, vol. 616, pp. 229–39.10.1016/j.msea.2014.08.030 ↗
28. G. Qian, G. Cheng, and Z. Hou: ISIJ Int., 2014, vol. 54, pp. 1611–20.10.2355/isijinternational.54.1611 ↗
29. Y. Guo, Y. Zhao, K. Wang, and S. Song: J. Mater. Res. Technol., 2020, vol. 9, pp. 16038–50.10.1016/j.jmrt.2020.11.059 ↗
30. Y. Guo, K. Wang, and S. Song: Mater. Sci. Eng. A, 2020, vol. 792, p. 139837.10.1016/j.msea.2020.139837 ↗
31. E. López-Chipres, I. Mejía, C. Maldonado, A. Bedolla-Jacuinde, and J.M. Cabrera: Mater. Sci. Eng. A, 2007, vol. 460, pp. 464–70.10.1016/j.msea.2007.01.098 ↗
32. D. Barbier, J. Guérin, M. Dubar, T. Bénard, S. Bonneau, and E. Cabrera: Mater. Sci. Eng. A, 2017, vol. 690, pp. 37–43.10.1016/j.msea.2017.02.053 ↗
33. H. Güler, R. Ertan, and R. Özcan: Mater. Sci. Eng. A, 2014, vol. 608, pp. 90–94.10.1016/j.msea.2014.04.053 ↗
34. K. Han, J. Yoo, B. Lee, I. Han, and C. Lee: Mater. Sci. Eng. A, 2014, vol. 618, pp. 295–304.10.1016/j.msea.2014.09.040 ↗
35. J. Yu, S. Zhang, H. Li, Z. Jiang, H. Feng, P. Xu, and P. Han: J. Mater. Sci. Technol., 2022, vol. 112, pp. 184–94.10.1016/j.jmst.2021.11.005 ↗
36. Y.J. Wang, S. Zhao, R.B. Song, and B. Hu: Int. J. Min. Met. Mater., 2021, vol. 28, pp. 422–29.10.1007/s12613-020-2206-x ↗
37. K.M. Hyeok, K. Jin-Kyung, B. Jian, M. Hardy, S. Taejin, K.S. Kyu, and C.B.C. De: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5509–23.
38. J.L. González-Velázquez: Brittle and Ductile Fractures, Fractography and Failure Analysis, Springer, Cham, 2018, pp. 49–69.10.1007/978-3-319-76651-5 ↗
39. Q.L. Yong: Secondary Phase in the Steel, Metallurgical Industry Press, Beijing, 2006.
40. H. Dong and X.J. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269–76.10.1016/j.cossms.2006.02.014 ↗
41. X.M. Chen, S.H. Song, Z.C. Sun, S.J. Liu, L.Q. Weng, and Z.X. Yuan: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2725–32.10.1016/j.msea.2010.01.047 ↗
42. C. Ioannidou, A. Navarro-López, A. Rijkenberg, R.M. Dalgliesh, S. Koelling, C. Pappas, J. Sietsma, A.A. van Well, and S. Erik Offerman: Acta Mater., 2020, vol. 201, pp. 217–30.10.1016/j.actamat.2020.09.083 ↗
43. A.E. Salas-Reyes, I. Mejía, A. Bedolla-Jacuinde, A. Boulaajaj, J. Calvo, and J.M. Cabrera: Mater. Sci. Eng. A, 2014, vol. 611, pp. 77–89.10.1016/j.msea.2014.05.072 ↗
44. Y. Zheng, F. Wang, C. Li, J. Cheng, and Y. Li: Mater. Sci. Eng. A, 2018, vol. 715, pp. 194–204.10.1016/j.msea.2018.01.001 ↗
45. J.G. Jung, J.S. Park, J. Kim, and Y.K. Lee: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5529–35.10.1016/j.msea.2011.03.086 ↗
46. J. Li, T. He, L. Cheng, P. Zhang, and L. Wang: Mater. Sci. Eng. A, 2019, vol. 763, p. 138187.10.1016/j.msea.2019.138187 ↗
47. J.C. Pang, H.L. Yi, Q. Lu, C.M. Enloe, and J.F. Wang: JOM, 2019, vol. 71, pp. 1329–37.10.1007/s11837-018-3308-z ↗
48. T.T.T. Trang, S.Y. Lee, Y.U. Heo, M.H. Kang, D.H. Lee, J.S. Lee, and C.H. Yim: Scr. Mater., 2022, vol. 215, p. 114685.10.1016/j.scriptamat.2022.114685 ↗