journal article·2023-07

Effect of KCl–ZnCl2 Ball-Milling Fluxing on Microstructure and Corrosion of Iron Ingot Hot-Dip Zinc Coating

Zhiwei Li, Haoping Peng, Aijun Xie, Changjun Wu, Jianhua Wang

Publisher page

Abstract

In this study, scanning electron microscopy, differential scanning calorimetry, X-ray photoelectron spectroscopy, and electrochemical workstation were used to study the effect of KCl–ZnCl2 ball-milling fluxing on the microstructure and corrosion of iron ingot hot-dip zinc coatings. The results show that compared with the solvent fluxing (S) NH4Cl–ZnCl2 and NH4Cl–ZnCl2–FeCl2, ball-milling fluxing (BM) KCl–ZnCl2 increases the thermal decomposition temperature of the ZnCl2·H2O salt and increases the thermostability of the fluxing salt film. KCl replaces NH4Cl, avoiding the white smoke particles produced by the condensation of NH3 and HCl. There are ζ and δ layers in the coating obtained by S-(NH4Cl–ZnCl2–FeCl2). The coatings obtained by S-(NH4Cl–ZnCl2) and BM-(KCl–ZnCl2) are the same, with η, ζ, and δ layers. In electrochemical corrosion, the η layer acts as the sacrificial anode, which delays the corrosion of the ζ layer and plays the sacrificial protection for the coating. Besides, in corrosion, the corrosion products generated by the η-layer are deposited on the coating surface. These corrosion products constitute the passivation film, which hinders the further development of corrosion and plays the barrier protection for the coating. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. H. Kania, J. Mendala, J. Kozuba, and M. Saternus: Materials, 2020, vol. 13, pp. 1–24.
2. Z.W. Li, H.P. Peng, Y. Liu, J.H. Wang, and X.P. Su: Trans. Indian Inst. Met., 2022, vol. 75, pp. 397–406.10.1007/s12666-021-02435-y ↗
3. S. Peng, S.K. Xie, J.T. Lu, and L.C. Zhang: J. Alloys Compd., 2017, vol. 728, pp. 1002–008.10.1016/j.jallcom.2017.09.091 ↗
4. Z.W. Li, H.P. Peng, Y. Liu, S.P. Su, S. Kawi, and J.H. Wang: J. Mater. Res. Technol., 2022, vol. 16, pp. 1402–412.10.1016/j.jmrt.2021.12.052 ↗
5. T.A. Pozdniakova, L.P. Mazur, R.A.R. Boaventyra, and V.J.P. Vilar: J. Clean. Prod., 2016, vol. 119, pp. 38–49.10.1016/j.jclepro.2016.02.003 ↗
6. M. Manna, G. Naidu, N. Rani, and N. Bandyopadhyay: Surf. Coat. Technol., 2008, vol. 202, pp. 1510–516.10.1016/j.surfcoat.2007.07.001 ↗
7. T. Bellezze, S. Saltykov, G. Roventi, M. Malavolta, and R. Fratesi: Surf. Coat. Technol., 2012, vol. 206, pp. 5023–027.10.1016/j.surfcoat.2012.04.008 ↗
8. R. Friess: Z. Anorg. Chem., 1903, vol. 206, pp. 3083–087.
9. N. Pistofidis, G. Vourlias, S. Konidaris, E. Pavlidou, G. Stergioudis, and D. Tsipas: Cryst. Res. Technol., 2006, vol. 41, pp. 759–65.10.1002/crat.200510664 ↗
10. S. Kahar, H. Panchal, and R. Patel: Int. J. Adv. Eng. Res. Dev., 2014, vol. 1, pp. 30–6.
11. W. Wołczynski, Z. Pogoda, G. Garzel, B. Kucharska, A. Sypien, and T. Okane: Arch. Metall. Mater., 2014, vol. 59, pp. 1393–404.10.2478/amm-2014-0237 ↗
12. B.D. Deshmukh and A.P. Patil: Int. J. Emerg. Technol. Adv. Eng., 2012, vol. 2, pp. 71–5.
13. S. Roy, Y. Liu, M. Topsakal, E. Dias, R. Gakhar, W.C. Phillips, J.F. Wishart, and D. Leshchev: J. Am. Chem. Soc., 2021, vol. 143, pp. 15298–5308.10.1021/jacs.1c06742 ↗
14. A.M.P. Simoes, R.O. Carbonari, A.R. Sarli, B.D. Amo, and R. Romagnoli: Corros. Sci., 2011, vol. 53, pp. 464–72.10.1016/j.corsci.2010.09.058 ↗
15. J. Wang, Y.Y. Zhang, K.K. Cui, T. Fu, J.J. Gao, and S.H. Hussain: J. Clean. Prod., 2021, vol. 298, 126788.10.1016/j.jclepro.2021.126788 ↗
16. Y. Boonyongmaneerate, K. Saenkiettiyut, P. Rattanawaleedirojn, C. Angkaprasert, J. Wanichsapan, and S. Saenapitak: J. Iron Steel Res. Int., 2010, vol. 17, pp. 74–8.10.1016/S1006-706X(10)60132-X ↗
17. T. Liu, R. Ma, Y.Z. Fan, A. Du, X. Zhao, M. Wen, and X.M. Cao: Surf. Coat. Technol., 2018, vol. 337, pp. 270–78.10.1016/j.surfcoat.2018.01.032 ↗
18. J.D. Hernández-Betancur, H.F. Hernandez, and L.M. Ocampo-Carmona: J. Clean. Prod., 2019, vol. 206, pp. 755–66.10.1016/j.jclepro.2018.09.177 ↗
19. R.E. Elewa, S.A. Afolalu, and O.S.I. Fayomi: International Conference on Engineering for Sustainable World, 2019, vol. 1378, pp. 022071.10.1088/1742-6596/1378/2/022071 ↗
20. G. Kong and R. White: J. Clean. Prod., 2010, vol. 18, pp. 1092–099.10.1016/j.jclepro.2010.03.006 ↗
21. B.B. Zhang, W.C. Xu, Q.J. Zhu, and B.R. Hou: J. Mater. Sci. Technol., 2021, vol. 66, pp. 74–81.10.1016/j.jmst.2020.06.035 ↗
22. T.J. Pan, W.M. Lu, Y.J. Ren, and W.T. Wu: Oxid. Met., 2009, vol. 72, pp. 179–90.10.1007/s11085-009-9154-1 ↗
23. A. Ul-Hamid: Cham, 2018. ISBN 978-3-319-98482-7.
24. G.W.H. Höhne, W.F. Hemminger, and H.J. Flammersheim: Applications of Differential Scanning Calorimetry, Springer, Berlin, 2003, pp. 147–244.10.1007/978-3-662-06710-9 ↗
25. A.P. Yadav, H. Katayama, K. Noda, H. Masuda, A. Nishikata, and T. Tsuru: Corros. Sci., 2007, vol. 49, pp. 3716–731.10.1016/j.corsci.2007.03.039 ↗
26. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
27. C.J. Li, P.W. Li, K. Wang, and E.E. Molina: AIMS Energy, 2014, vol. 2, pp. 133–57.10.3934/energy.2014.2.133 ↗
28. S. Niazi, E. Olsen, and H.S. Nygard: J. Mol. Liq., 2020, vol. 317, 114069.10.1016/j.molliq.2020.114069 ↗
29. Z. Yu, J.M. Hu, and H.M. Meng: Front. Mater., 2020, vol. 7, pp. 1–7.10.3389/fmats.2020.00001 ↗
30. P.C.J. Graat and M.A.J. Somers: Appl. Surf. Sci., 1996, vol. 101, pp. 36–40.10.1016/0169-4332(96)00252-8 ↗
31. X.L. Shang, B. Zhang, E.H. Han, and W. Ke: Electrochim. Acta, 2011, vol. 56, pp. 1417–425.10.1016/j.electacta.2010.10.067 ↗
32. P. Kaspar, D. Sobola, R. Dallaev, S. Ramazanov, A. Nebojsa, S. Rezaee, and L. Grmela: Appl. Surf. Sci., 2019, vol. 493, pp. 673–78.10.1016/j.apsusc.2019.07.058 ↗
33. P. Ghods, O.B. Isgor, J.R. Brown, F. Bensebaa, and D. Kingston: Appl. Surf. Sci., 2011, vol. 257, pp. 4669–677.10.1016/j.apsusc.2010.12.120 ↗
34. E. Diler, B. Lescop, S. Rioual, G. Nguyen, D. Thierry, and B. Rouvelou: Corros. Sci., 2014, vol. 79, pp. 83–8.10.1016/j.corsci.2013.10.029 ↗
35. X. Zhang, C. Leygraf, and L.O. Wallinder: Corros. Sci., 2013, vol. 73, pp. 62–71.10.1016/j.corsci.2013.03.025 ↗
36. Z.H. Wang, C.T. Chen, J.C. Liu, G. Zhang, and K. Suganuma: Corros. Sci., 2018, vol. 140, pp. 40–50.10.1016/j.corsci.2018.06.025 ↗
37. T.M.C. Nogueira, U.R. Seixas, and P.R. Rios: ISIJ Int., 1998, vol. 38, pp. 775–77.10.2355/isijinternational.38.775 ↗
38. H. Zhang, M.S. Yuan, N.M. Wen, and G.P. Cheng: Corros. Prot., 2002, vol. 23, pp. 436–40.
39. A. Besseyrias, F. Dalard, J.J. Rameau, and H. Baudin: Corros. Sci., 1995, vol. 37, pp. 587–95.10.1016/0010-938X(94)00155-Y ↗
40. M.S. Oh, S.H. Kim, J.S. Kim, J.W. Lee, J.H. Shon, and Y.S. Jin: Met. Mater. Int., 2016, vol. 22, pp. 26–33.10.1007/s12540-015-5411-9 ↗
41. J.W. Lee, B.R. Park, S.Y. Oh, D.W. Yun, J.K. Hawang, and M.S. Oh: Corros. Sci., 2019, vol. 160, 108170.10.1016/j.corsci.2019.108170 ↗