journal article·2023-05Open access

Identifying Critical Defect Sizes From Pore Clusters in Nickel-based Superalloys Using Automated Analysis and Casting Simulation

Naomi Piera Bellomo, Irem Öztürk, Michael Günzel, Rachel Reed, Veeraraghavan Sundar, Amine Ammar, Caspar Schwalbe

Abstract

Abstract Porosity can form during investment casting as a result of the solidification conditions. Significant porosity can result in agglomerations (pore clusters) which are a primary crack initiation source and can result in reduced fatigue life of Nickel-based superalloys. Such clusters of porosity are today conventionally measured using 2D micrographs. An approach to accurately predict and analyze casting porosity from 2D cuts while facing in reality a 3D shape problem is currently missing. In this work, an approach that combines automation and simulation to assess the representative pore dimension, their interconnectivity and the porosity position is presented. On a LPT blade made of IN100, the porosity percentage and Feret diameter have been measured in multiple cuts and the porosity was found to be in the range of 0.88 to 5.4 pct. From the same micrographs the critical defect sizes were estimated with an automated tool to be in the range of 200 to 1800 $$\mu$$m. The simulated shrinkage porosity for the same part, was predicted to be in the range of 1.67 to 2.33 pct. This study shows that the scaling factor between the pore Feret diameter and the critical pore size is equal to 2.9, in accordance to the proportionality of critical pores size clusters calculated from a 2D and 3D dataset. Finally, the simulated casting porosity was compared to that measured on cast blades in critical regions and the predictive accuracy is discussed in detail.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. A. Morad and Y. Shash: Int. Conf. Appl. Mech. Mech. Eng., 2014, vol. 16, pp. 1–22.
2. W. Jiang, P. Li, W.-X. Yao, S.-S. Rui, H.-J. Shi, and J. Huang: Int. J. Fatigue, 2021, vol. 147, 106191.10.1016/j.ijfatigue.2021.106191 ↗
3. Smith, R., Lewi, G., Yates, D. Aircraft engineering and aerospace technology (2001)
4. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006. https://doi.org/10.1017/CBO9780511541285.10.1017/CBO9780511541285 ↗
5. T.V. Sai, T. Vinod, and G. Sowmya: Eng. Technol., 2017, vol. 3(2), pp. 463–68.
6. N. D’Souza: Mater. Sci. Technol., 2009, vol. 25(2), pp. 170–78.10.1179/174328408X369302 ↗
7. A.K. Gupta, B.K. Saxema, S.N. Tiwari, and S.L. Malhorta: J. Mater. Sci., 1992, vol. 27, pp. 853–62.10.1007/BF01197634 ↗
8. G. Sigworth and C. Wang: Metall. Trans. B, 1993, vol. 24B, pp. 349–64.10.1007/BF02659138 ↗
9. K. Pang and H. Yuan: Int. J. Fatigue, 2020, vol. 136, 105575.10.1016/j.ijfatigue.2020.105575 ↗
10. A. Cervellon, S. Hemery, P. Kurnsteiner, B. Gault, P. Kontis, and J. Cormier: Acta Mater., 2020, vol. 188, pp. 131–44.10.1016/j.actamat.2020.02.012 ↗
11. B. Bokstein, A. Epishin, T. Link, V. Esin, A. Rodin, and I. Svetlov: Scripta Mater., 2007, vol. 57(9), pp. 801–04.10.1016/j.scriptamat.2007.07.012 ↗
12. B. Ruttert, C. Meid, L. Mujica Roncery, I. Lopez-Galilea, M. Bartsch, and W. Theisen: Scripta Mater., 2018, vol. 155, pp. 139–43.10.1016/j.scriptamat.2018.06.036 ↗
13. K. Liu, J. Wang, B. Wang, P. Mao, Y. Yang, and Y. Zhou: Mater. Charact., 2021, vol. 177, 111180.10.1016/j.matchar.2021.111180 ↗
14. J.-C. Gebelin and M.R. Jolly: J. Mater. Process. Technol., 2003, vol. 135(2–3), pp. 291–300.10.1016/S0924-0136(02)00860-9 ↗
15. S. Roskosz: Prac. Metallogr., 2013, vol. 50(8), pp. 527–47.10.3139/147.110214 ↗
16. A. Torroba, O. Koeser, L. Calba, L. Maestro, E. Carreno-Morelli, M. Rahimian, S. Milenkovic, I. Sabirov, and J. Llorca: Integr. Mater. Manuf. Innov., 2014, vol. 3, p. 25.10.1186/2193-9772-3-3 ↗
17. P.G.R. Deshpande: Int. J. Innov. Eng. Res. Technol., 2019, vol. 3, pp. 1–4.
18. E. Abhilash and M. Joseph: Indian Foundry J., 2009, vol. 55(10), pp. 28–37.
19. X. Yan, R. Nan Wang, Q. Xu, and B. Liu: High Temp. Mater. Process. (London), 2017, vol. 36(4), pp. 327–37.10.1515/htmp-2016-0116 ↗
20. D. Szeliga, K. Kubiak, A. Burbelko, M. Motyka, and J. Sieniawski: J. Mater. Eng. Perform., 2014, vol. 23(3), pp. 1088–95.10.1007/s11665-013-0820-8 ↗
21. C. Ridgeway, C. Gu, K. Ripplinger, D. Detwiler, M. Ji, S. Sohgrati, and A. Luo: Mater. Des., 2020, vol. 194, 108929.10.1016/j.matdes.2020.108929 ↗
22. L. Shark, C. Yu, J. Smith: J. ROMA. 15th WCNDT, 2000
23. K. Heim, F. Bernier, R. Pelletier, and L.-P. Lefebvre: Case Stud. Nondestruct. Test. Eval., 2016, vol. 6, pp. 45–52.10.1016/j.csndt.2016.09.002 ↗
24. T. Kowaluk: Pomiary Automatyka Robotyka, 2012, vol. 16, pp. 82–86.
25. S. Tian, L. Bowen, B. Liu, F. Zeng, H. Xue, V. Erastova, H. Chris Greenwell, Z. Dong, R. Zhao, and J. Liu: Fuel, 2021, vol. 304, 121319.10.1016/j.fuel.2021.121319 ↗
26. L. Ouichou, F. Lavaud, G. Lesoult: Proceedings of the Superalloys. Springer Nature 2021 LATEX template Identifying critical defect sizes using automated analysis, 1980.
27. C. Pequet, M. Rappaz, and M. Gremaud: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2095–2106.10.1007/s11661-002-0041-5 ↗
28. W. Walton: Nature, 1948, vol. 162(4113), pp. 329–30.10.1038/162329b0 ↗
29. Y. Murakami: Eng. Fract. Mech., 1985, vol. 22(1), pp. 101–14.10.1016/0013-7944(85)90163-8 ↗
30. Y. Murakami and M. Endo: Int. J. Fatigue, 1994, vol. 16(3), pp. 163–82.10.1016/0142-1123(94)90001-9 ↗
31. I. Ozturk: Automated evaluation of standard defect sizes for casting porosity. Master’s thesis, Technische Universitat Munchen, 2021.
32. J. Yousefi: Ontario, Canada: University of Guelph, 2011.
33. https://docs.opencv.org/3.4/d9/db0/tutorialhoughlines.html. Accessed Aug 2021.
34. S. Lloyd: IEEE Trans. Inf. Theory, 1982, vol. 28(2), pp. 129–37.10.1109/TIT.1982.1056489 ↗
35. I.T. Jolliffe and J. Cadima: Philos. Trans. R. Soc. A, 2016, vol. 374(2065), p. 20150202.10.1098/rsta.2015.0202 ↗
36. C. Krammer: Korrelation der flächenporosität mit der größe des risskeims in der nickelbasis-superlegierung mar-m247. masterthesis, technical university of munich (tum), 2013.
37. Y. Murakami and S. Beretta: Extremes, 1999, vol. 2(2), pp. 123–47.10.1023/A:1009976418553 ↗
38. J.E. Spowart, H.E. Mullens, and B.T. Puchala: JOM, 2003, vol. 55(10), pp. 35–37.10.1007/s11837-003-0173-0 ↗
39. T. Link, S. Zabler, A. Epishin, A. Haibel, M. Bansal, and X. Thibault: Mater. Sci. Eng. A, 2006, vol. 425(1), pp. 47–54.10.1016/j.msea.2006.03.005 ↗
40. S. Roskosz: Arch. Metall. Mater., 2017, vol. 62, pp. 253–58.10.1515/amm-2017-0038 ↗
41. M. Riedler, S. Michelic, and C. Bernhard: IOP Conf. Ser., 2016, vol. 143(1), 012035.10.1088/1757-899X/143/1/012035 ↗
42. L. Yang, L.H. Chai, L.Q. Zhang, and J. Lin: Mater. Sci. Forum, 2013, vol. 747, pp. 105–10.10.4028/www.scientific.net/MSF.747-748.105 ↗
43. J. Gumpinger, A. Brandao, E. Beevers, T. Rohr, T. Ghidini, S. Beretta, S. Romano: 2018.
44. D. Ma: Front. Mech. Eng. 2017, vol. 13.10.1007/s11465-018-0475-0 ↗
45. D. O’Mahoney and D.J. Browne: Exp. Thermal Fluid Sci., 2000, vol. 22(3), pp. 111–22.10.1016/S0894-1777(00)00014-5 ↗
46. Y. Zhou, B. Wang, S. Li, W. Li, K. Xu, J. Liang, F. Zhou, C. Wang, and J. Wang: J. Alloy. Compd., 2022, vol. 897, 163169.10.1016/j.jallcom.2021.163169 ↗