Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780
Source abstract
Abstract
Abstract VDM® Alloy 780 is a newly developed polycrystalline Ni-base superalloy with high contents of Co, Cr, and Al intended for operating temperatures up to 750 °C. The alloy is precipitation strengthened by the γ′ phase, which is analyzed by atom probe tomography. Additionally, δ and η phases are utilized for grain boundary pinning. It is shown that the δ and η phases precipitate either plate like or in a fine lamellar structure inside each other. VDM® Alloy 780 shows superior oxidation resistance in comparison with Udimet 720Li and A718Plus, as seen by a lower mass gain and thinner oxide layers at 800 °C and 900 °C. This superior behavior is analyzed in detail by TEM and STEM investigations of the oxide scales from which it is concluded that the Al/Ti ratio in these alloys plays an important role on the oxidation behavior.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, 1st ed. Cambridge University Press, New York, 2006.10.1017/CBO9780511541285 ↗
2. K. Bohan, E.V. Klapdor, B. Prade, A.Haeggmark, B. Ghenadie, P. Nakul, M. Welch, P. Adamsson, and T. Johnke: Hydrogen for Gas Turbines (white paper, 2020) https://www.infrastructureasia.org/-/media/Articles-for-ASIA-Panel/Siemens-Energy---Hydrogen-Power-with-Siemens-Gas-Turbines.ashx. Accessed 11 January 2022.
3. J. Rösler, T. Hentrich, and B. Gehrmann: Metals, 2019, vol. 9, pp. 1–20.10.3390/met9101130 ↗
4. K. Löhnert and F. Pyczak: 7th International Symposium on Superalloy 718 and Derivates, 2010.
5. O.M. Messé, J.S. Barnard, E.J. Pickering, P.A. Midgley, and C.M.F. Rae: Philos. Mag., 2014, vol. 94, pp. 1132–52.10.1080/14786435.2013.878052 ↗
6. M. Bergner, J. Rösler, B. Gehrmann, and J. Klöwer: Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, 2018, pp. 489–99.10.1007/978-3-319-89480-5_31 ↗
7. D. Hausmann, A. Förner, M. Pröbstle, D. Hünert, P. Felfer, M. Göken, and S. Neumeier: Advanced Engineering Materials, 2021, p. 2100558.10.1002/adem.202100558 ↗
8. F. Kümmel, A. Kirchmayer, C. Solís, M. Hofmann, S. Neumeier, and R. Gilles: Metals, 2021, vol. 11, p. 719.10.3390/met11050719 ↗
9. C. Ghica, C. Solís, J. Munke, A. Stark, B. Gehrmann, M. Bergner, J. Rösler, and R. Gilles: J. Alloy Compd., 2020, vol. 814, p. 152157.10.1016/j.jallcom.2019.152157 ↗
10. T. Fedorova, J. Rösler, J. Klöwer, and B. Gehrmann: MATEC Web Conf., 2014, vol. 14, p. 01003.10.1051/matecconf/20141401003 ↗
11. T Fedorova, J Rösler, B. Gehrmann, and J. Klöwer: n.d., p. 11.
12. E.J. Pickering, H. Mathur, A. Bhowmik, O.M.D.M. Messé, J.S. Barnard, M.C. Hardy, R. Krakow, K. Loehnert, H.J. Stone, and C.M.F. Rae: Acta Mater., 2012, vol. 60, pp. 2757–69.10.1016/j.actamat.2012.01.042 ↗
13. S. Lech, A. Gil, G. Cempura, A. Agüero, A. Kruk, and A. Czyrska-Filemonowicz: Int. J. Mater. Res., 2019, vol. 110, pp. 42–48.10.3139/146.111675 ↗
14. M.H. Li, X.F. Sun, J.G. Li, Z.Y. Zhang, T. Jin, H.R. Guan, and Z.Q. Hu: Oxid. Met., 2003, vol. 59, pp. 591–605.10.1023/A:1023604214245 ↗
15. A. Sato, Y.-L. Chiu, and R.C. Reed: Acta Mater., 2011, vol. 59, pp. 225–40.10.1016/j.actamat.2010.09.027 ↗
16. C.S. Giggins and F.S. Pettit: J. Electrochem. Soc., 1971, vol. 118, p. 1782–90.10.1149/1.2407837 ↗
17. F.H. Stott: Rep. Prog. Phys., 1987, vol. 50, pp. 861–913.10.1088/0034-4885/50/7/002 ↗
18. F.S. Pettit: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1297–1305.
19. VDM Metals International GmbH, VDM Powder 780 (Vdm Metals, 2020), https://www.vdm-metals.com/fileadmin/user_upload/Downloads/Data_Sheets/Data_Sheet_VDM_Powder_780.pdf. Accessed 12 June 2022
20. ATI Allvac, A718Plus data sheet (Atimaterials, 2010) https://www.atimaterials.com/Products/Documents/datasheets/nickel-cobalt/nickel-based/ati_718plus_tds_en_v3.pdf. Accessed 12 June 2022
21. Special metals: Product Handbook of high-performance nickel alloyst (special metals) https://www.specialmetals.com/documents/nickel-alloy-handbook.pdf. Accessed 12 June 2022
22. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131–39.10.1016/j.ultramic.2006.06.008 ↗
23. A. Devaraj, D.E. Perea, J. Liu, L.M. Gordon, T.J. Prosa, P. Parikh, D.R. Diercks, S. Meher, R.P. Kolli, Y.S. Meng, and S. Thevuthasan: Int. Mater. Rev., 2018, vol. 63, pp. 68–101.10.1080/09506608.2016.1270728 ↗
24. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
25. C. Solís, J. Munke, M. Bergner, A. Kriele, M.J. Mühlbauer, D.V. Cheptiakov, B. Gehrmann, J. Rösler, and R. Gilles: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4373–81.10.1007/s11661-018-4761-6 ↗
26. L. Viskari and K. Stiller: Ultramicroscopy, 2011, vol. 111, pp. 652–58.10.1016/j.ultramic.2011.01.015 ↗
27. C.E. Slone, J. Miao, E.P. George, and M.J. Mills: Acta Mater., 2019, vol. 165, pp. 496–507.10.1016/j.actamat.2018.12.015 ↗
28. S. Cruchley, H.E. Evans, M.P. Taylor, M.C. Hardy, and S. Stekovic: Corros. Sci., 2013, vol. 75, pp. 58–66.10.1016/j.corsci.2013.05.016 ↗
29. S. Lech, A. Kruk, A. Gil, G. Cempura, A. Agüero, and A. Czyrska-Filemonowicz: Scripta Mater., 2019, vol. 167, pp. 16–20.10.1016/j.scriptamat.2019.03.027 ↗
30. A. Kruk, A. Gil, S. Lech, G. Cempura, A. Agüero, and A. Czyrska-Filemonowicz: Materials, 2021, vol. 14, p. 6327.10.3390/ma14216327 ↗
31. J.H. Chen, P.M. Rogers, and J.A. Little: Oxid. Met., 1997, vol. 47, pp. 381–410.10.1007/BF02134783 ↗
32. A.A.N. Németh, D.J. Crudden, D.E.J. Armstrong, D.M. Collins, K. Li, A.J. Wilkinson, C.R.M. Grovenor, and R.C. Reed: Acta Mater., 2017, vol. 126, pp. 361–71.10.1016/j.actamat.2016.12.039 ↗
33. R.C. Reed, M.P. Jackson, and Y.S. Na: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 521–33.10.1007/s11661-999-0044-6 ↗
34. M.P. Jackson and R.C. Reed: Mater. Sci. Eng. A, 1999, vol. 259, pp. 85–97.10.1016/S0921-5093(98)00867-3 ↗
35. M. Schiek, L. Niewolak, W. Nowak, G.H. Meier, R. Vaßen, and W.J. Quadakkers: Oxid. Met., 2015, vol. 84, pp. 661–94.10.1007/s11085-015-9595-7 ↗
36. J. Zurek, D.J. Young, E. Essuman, M. Hänsel, H.J. Penkalla, L. Niewolak, and W.J. Quadakkers: Mater. Sci. Eng. A, 2008, vol. 477, pp. 259–70.10.1016/j.msea.2007.05.035 ↗
37. M. Bensch, A. Sato, N. Warnken, E. Affeldt, R.C. Reed, and U. Glatzel: Acta Mater., 2012, vol. 60, pp. 5468–80.10.1016/j.actamat.2012.06.036 ↗
38. W. Zhao, Y. Kang, J.M.A. Orozco, and B. Gleeson: Oxid. Met., 2015, vol. 83, pp. 187–201.10.1007/s11085-014-9516-1 ↗
39. T.L. Barth and E.A. Marquis: Oxid. Met., 2019, vol. 92, pp. 13–26.10.1007/s11085-019-09911-3 ↗
40. H. Nagai and M. Okabayashi: Trans. JIM, 1981, vol. 22, pp. 691–98.10.2320/matertrans1960.22.691 ↗
41. W.J. Nowak, B. Wierzba, and J. Sieniawski: High Temp. Mater. Process., 2018, vol. 37, pp. 801–06.10.1515/htmp-2017-0089 ↗
42. K. Wollgarten, T. Galiullin, W.J. Nowak, W.J. Quadakkers, and D. Naumenko: Corros. Sci., 2020, vol. 173, p. 108774.10.1016/j.corsci.2020.108774 ↗
43. K.A. Unocic and B.A. Pint: 8th International Symposium on Superalloy 718 and Derivatives, 2014, pp. 667–77.10.1002/9781119016854.ch52 ↗
44. T. Gheno, D. Monceau, and D.J. Young: Corros. Sci., 2012, vol. 64, pp.222–33.
45. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: MTA, 1988, vol. 19, pp. 453–65.10.1007/BF02649259 ↗
46. A. Stratulat, D.E.J. Armstrong, and S.G. Roberts: Corros. Sci., 2016, vol. 104, pp. 9–16.10.1016/j.corsci.2015.10.019 ↗