The Generalized Additivity Rule for Thermal Path-Dependent Diffusion-Controlled Phase Transformation by Simultaneous Nucleation and Growth and Its Mathematical Solutions
Source abstract
Abstract
Scheil’s additivity rule is widely applied to converting isothermal phase transformation kinetics to anisothermal ones. However, it often causes serious discrepancies between the calculated and experimental results. To better describe anisothermal phase transformation kinetics, a generalized additivity model was proposed in this paper, in which Johnson–Mehl–Avrami–Kolmogorov equation in couple with diffusion-controlled nucleation and growth was taken into account. The mathematical solutions of kinetic parameters for austenite to ferrite and pearlite transformations were determined by using machine learning under the generalized additivity rule. Conversions between isothermal and anisothermal kinetics for austenite to ferrite and pearlite transformations were carried out, which indicated that the new additivity rule was in better agreement with the experimental values than the Scheil’s additivity rule. Furthermore, the generalized isokinetic condition considering the thermal path effect was discussed and analyzed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. H. Martin, P.A. Yirenkyi, A. Pohjonen, N.K. Frempong, J. Komi, and M. Somani: Metall. Mater. Trans. B, 2020, vol. 52B, pp. 223–35.
2. X. Liu, H. Li, and M. Zhan: Manuf. Rev., 2018, vol. 5, p. 10.
3. W.A. Johnson and R.F. Mehl: Trans. Am. Inst. Min. Metall. Eng., 1939, vol. 135, pp. 416–22.
4. M. Avrami: J. Chem. Phys., 1939, vol. 7(12), pp. 1103–12.10.1063/1.1750380 ↗
5. A.E. Kolmogorov: Bull. Acad. Sci. URSS, 1937, vol. 1, pp. 355–59.
6. N.V. Alekseechkin: Acta Mater., 2020, vol. 201, pp. 114–30.10.1016/j.actamat.2020.09.061 ↗
7. M. Enomoto and H. Aaronson: Metall. Trans. A, 1986, vol. 17A, pp. 1385–397.10.1007/BF02650120 ↗
8. M. Enomoto, W. Lange, and H. Aaronson: Metall. Trans. A, 1986, vol. 17A, pp. 1399–407.10.1007/BF02650121 ↗
9. W. Lange, M. Enomoto, and H. Aaronson: Metall. Trans. A, 1988, vol. 19, pp. 427–40.10.1007/BF02649256 ↗
10. H. Kim, J. Inoue, T. Kasuya, M. Okada, and K. Nagata: Comput. Mater. Sci., 2020, vol. 184, 109837.10.1016/j.commatsci.2020.109837 ↗
11. M. Tomellini: J. Therm. Anal. Calorim., 2014, vol. 116, pp. 853–64.10.1007/s10973-013-3607-0 ↗
12. F. Liu, F. Sommer, C. Bos, and E.J. Mittemeijer: Int. Mater. Rev., 2013, vol. 52, pp. 193–212.10.1179/174328007X160308 ↗
13. Y.H. Jiang, F. Liu, and S.J. Song: Acta Mater., 2012, vol. 60, pp. 3815–829.10.1016/j.actamat.2012.03.042 ↗
14. E. Scheil: Steel Res. Int., 1935, vol. 8, pp. 565–67.10.1002/srin.193500186 ↗
15. K. Mukunthan and E. Hawbolt: Metall. Mater. Trans. A, 1996, vol. 27, pp. 3410–423.10.1007/BF02595434 ↗
16. O. Djema, M. Bouabdallah, R. Badji, A. Saadi, N. Kherrouba, and A. Sahli: Mater. Chem. Phys., 2020, vol. 240, 122073.10.1016/j.matchemphys.2019.122073 ↗
17. F. Liu, C. Yang, G. Yang, and Y. Zhou: Acta Mater., 2007, vol. 55, pp. 5255–267.10.1016/j.actamat.2007.05.041 ↗
18. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–24.10.1063/1.1750631 ↗
19. J.W. Cahn: Acta Mater., 1956, vol. 4, pp. 572–75.10.1016/0001-6160(56)90158-4 ↗
20. M. Lusk and H.J. Jou: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 281–97.
21. J.W. Christian: The theory of transformations in metals and alloys, 1st ed. Pergamon, Oxford, 1965, p. 492.
22. T.Y. Hsu: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 256–68.10.1016/j.cossms.2006.02.011 ↗
23. A.R. Massih and L.O. Jernkvist: Model. Simul Mater. Sci. Eng., 2009, vol. 17, 055002.10.1088/0965-0393/17/5/055002 ↗
24. T. Pham, E. Hawbolt, and J. Brimacombe: Metall. Mater. Trans. A, 1995, vol. 26, pp. 1987–992.10.1007/BF02670670 ↗
25. T. Réti and I. Felde: Comput. Mater. Sci., 1999, vol. 15, pp. 466–82.10.1016/S0927-0256(99)00035-X ↗
26. M.T. Todinov: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 269–73.10.1007/s11663-998-0030-1 ↗
27. J. Ye, T. Hsu, and H. Chang: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1259–264.10.1007/s11661-003-0236-4 ↗
28. Y. Zhu, T. Lowe, and R. Asaro: J. Appl. Phys., 1997, vol. 82, pp. 1129–137.10.1063/1.365879 ↗
29. M. Fontana, M.A. Ureña, B. Arcondo, and M.T. Clavaguera-Mora: Int. J. Therm Sci., 2016, vol. 109, pp. 33–43.10.1016/j.ijthermalsci.2016.05.020 ↗
30. I.I. Boyadjie, P.F. Thomson, and Y.C. Lam: ISIJ Int., 1996, vol. 36, pp. 1413–419.10.2355/isijinternational.36.1413 ↗
31. X. Chen, N. Xiao, D. Li, G. Li, and G. Sun: Model. Simul Mater. Sci. Eng., 2014, vol. 22, 065005.10.1088/0965-0393/22/6/065005 ↗
32. J. Majta, M. Pietrzyk, A.K. Zurek, M. Cola, and P. Hochanadel: Metall. Mater. Trans. A, 2002, vol. 33, pp. 1509–520.10.1007/s11661-002-0073-x ↗
33. X.G. Zhou, Z.Y. Liu, D. Wu, W. Wang, and S.H. Jiao: J. Iron. Steel Res. Int., 2006, vol. 13, pp. 32–4.10.1016/S1006-706X(06)60073-3 ↗
34. A. Pohjonen, M. Somani, and D. Porter: Comput. Mater. Sci., 2018, vol. 150, pp. 244–51.10.1016/j.commatsci.2018.03.052 ↗
35. X. Chen, N. Xiao, M. Cai, D. Li, G. Li, G. Sun, and B.F. Rolfe: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4732–740.10.1007/s11661-016-3608-2 ↗
36. M.V. Maisuradze, Y.V. Yudin, and M.A. Ryzhkov: Met. Sci. Heat Treat., 2015, vol. 56, pp. 512–16.10.1007/s11041-015-9791-8 ↗
37. T.Y. Hsu: ISIJ Int., 2004, vol. 44, pp. 777–79.10.2355/isijinternational.44.777 ↗
38. J. Farjas and P. Roura: Acta Mater., 2006, vol. 54, pp. 5573–579.10.1016/j.actamat.2006.07.037 ↗
39. M. Tomellini: Thermochim. Acta., 2013, vol. 566, pp. 249–56.10.1016/j.tca.2013.06.002 ↗
40. M. Tomellini: J. Mater. Sci., 2015, vol. 50, pp. 4516–525.10.1007/s10853-015-9001-5 ↗
41. S. Song, F. Liu, and Y. Jiang: J. Mater. Sci., 2014, vol. 49, pp. 2624–629.10.1007/s10853-013-7964-7 ↗
42. H. Farahani, H. Zurob, C.R. Hutchinson, and S. van der Zwaag: Acta Mater., 2018, vol. 150, pp. 224–35.10.1016/j.actamat.2018.03.026 ↗
43. E. Palma-Elvira, P. Garnica-Gonzalez, J. Pacheco-Cedeño, J.C. Rivera, M. Ramos-Azpeitia, C. Garay-Reyes, and J. Hernández-Rivera: J. Alloys Compd., 2019, vol. 798, pp. 45–52.10.1016/j.jallcom.2019.05.130 ↗
44. J.W. Cahn: Acta Mater., 1956, vol. 4, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
45. Z. Liu, G. Wang, and W. Gao: J. Mater. Eng. Perform., 1996, vol. 5, pp. 521–25.10.1007/BF02648850 ↗
46. S.E. Offerman, L.J.G.W. van Wilderen, N.H. van Dijk, J. Sietsma, MTh. Rekveldta, and S. van der Zwaag: Acta Mater., 2003, vol. 51, pp. 3927–938.10.1016/S1359-6454(03)00217-9 ↗
47. S.K. Mishra: Mpra Paper., 2007, vol. 4634, pp. 1–21.
48. S.J. Lee, D.K. Matlock, and C.J. Van Tyne: ISIJ Int., 2011, vol. 51, pp. 1903–911.10.2355/isijinternational.51.1903 ↗
49. J.R. Lacher: Proc. Camb. Philos. Soc., 1937, vol. 33, p. 518.10.1017/S0305004100077641 ↗
50. R.H. Fowler and E.A. Guggenheim: Statistical Thermodynamics, Cambridge University Press, New York, 1939.
51. G. Shiflet, J. Bradley, and H.I. Aaronson: Metall Trans A, 1978, vol. 9A, pp. 999–1008.10.1007/BF02649845 ↗
52. J.M. Kim, M. Kang, N.H. Goo, S.H. Hong, J.H. Shim, Y.K. Lee, and K.J. Lee: Metall. Mater. Trans. A, 2020, vol. 51, pp. 4422–426.10.1007/s11661-020-05910-1 ↗
53. T. Réti, L. Horvath, and I. Felde: J. Mater. Eng. Perform., 1997, vol. 6, pp. 433–41.10.1007/s11665-997-0113-1 ↗
54. M. Enomoto, W. Huang, and H. Ma: ISIJ Int., 2012, vol. 52, pp. 626–31.10.2355/isijinternational.52.626 ↗
55. S.A. Razavi, F. Ashrafizadeh, and S. Fooladi: Mater. Sci. Eng. A, 2016, vol. 675, pp. 147–52.10.1016/j.msea.2016.08.049 ↗
56. Ø. Grong and O. Myhr: Acta Mater., 2000, vol. 48, pp. 445–52.10.1016/S1359-6454(99)00360-2 ↗
57. C. Capdevila, F.G. Caballero, and C.G. de Andrés: Acta Mater., 2002, vol. 50, pp. 4629–641.10.1016/S1359-6454(02)00314-2 ↗
58. S.W. Seo, H. Bhadeshia, and D.W. Suh: Mater. Sci. Technol., 2015, vol. 31, pp. 487–93.10.1179/1743284714Y.0000000641 ↗