Kinetically Induced Fine Secondary α-Ti Phase Formation in a Novel As-Cast Titanium Alloy
Source abstract
Abstract
The formation of fine secondary hexagonal close packed (HCP) α-Ti precipitates provides major strengthening in a new Ti-6Al-5Fe-0.05B-0.05C (mass fractions in pct) cast alloy. The phase transformation mechanisms from the body-centered cubic (BCC) β-Ti matrix to fine α phase in this new α-β titanium alloy were investigated experimentally and computationally using CALculation of PHAse Diagram (CALPHAD)-based thermodynamic and kinetic models. The discrete distribution of α precipitates was observed in the as-cast alloy with evidence of strong Fe partitioning. Two main size groups of α precipitates and the Fe partitioning were characterized using scanning electron microscopy, scanning transmission electron microscopy, and synchrotron-based small-angle X-ray scattering techniques. A hypothesis of Fe-partitioning driven α precipitate nucleation and growth was validated by precipitation simulation using TC-PRISMA with customized thermodynamic and kinetic descriptions. These results suggested a new titanium alloy design route involving high-mobility elements (enhancing fine secondary α precipitates) and demonstrated the capability of CALPHAD-based modeling in titanium alloy design.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. G. Lütjering and J.C. Williams: Titanium, 2nd ed. Springer, Berlin, 2007.
2. D. Banerjee and J.C. Williams: Acta Mater., 2013, vol. 61(3), pp. 844–79.10.1016/j.actamat.2012.10.043 ↗
3. F.H. Froes: Titanium: Physical Metallurgy, Processing, and Applications, ASM International, Materials Park, OH, 2015.10.31399/asm.tb.tpmpa.9781627083188 ↗
4. A.A. Luo: CALPHAD, 2015, vol. 50, pp. 6–22.10.1016/j.calphad.2015.04.002 ↗
5. C. Gu, Y. Lu, E. Cinkilic, J. Miao, A. Klarner, X. Yan, and A.A. Luo: Comput. Mater. Sci., 2019, vol. 161, pp. 64–75.10.1016/j.commatsci.2019.01.029 ↗
6. C.D. Ridgeway, C. Gu, and A.A. Luo: J. Mater. Sci., 2019, vol. 54, pp. 9907–920.10.1007/s10853-019-03558-w ↗
7. C. Zhang, J. Miao, S. Chen, F. Zhang, and A.A. Luo: J. Phase Equilib. Diffus., 2019, vol. 40, pp. 495–507.10.1007/s11669-019-00732-0 ↗
8. R. Shi, J. Miao, and A.A. Luo: Scripta Mater., 2019, vol. 171, pp. 92–7.10.1016/j.scriptamat.2019.06.027 ↗
9. X. Xia, W. Sun, A.A. Luo, and D.S. Stone: Acta Mater., 2016, vol. 111, pp. 335–47.10.1016/j.actamat.2016.03.068 ↗
10. Z. Liang, J. Miao, T. Brown, A.K. Sachdev, J.C. Williams, and A.A. Luo: Scripta Mater., 2018, vol. 157, pp. 124–28.10.1016/j.scriptamat.2018.08.005 ↗
11. S. Nag, Y. Zheng, R.E.A. Williams, A. Devaraj, A. Boyne, Y. Wang, P.C. Collins, G.B. Viswanathan, J.S. Tiley, B.C. Muddle, R. Banerjee, and H.L. Fraser: Acta Mater., 2012, vol. 60, pp. 6247–256.10.1016/j.actamat.2012.07.033 ↗
12. Y. Zheng, R.E.A. Williams, J.M. Sosa, T. Alam, Y. Wang, R. Banerjee, and H.L. Fraser: Acta Mater., 2016, vol. 103, pp. 165–73.10.1016/j.actamat.2015.09.053 ↗
13. Y. Zheng, R.E.A. Williams, J.M. Sosa, Y. Wang, R. Banerjee, and H.L. Fraser: Scripta Mater., 2016, vol. 111, pp. 81–4.10.1016/j.scriptamat.2015.08.019 ↗
14. Y. Zheng, R.E.A. Williams, D. Wang, R. Shi, S. Nag, P. Kami, J.M. Sosa, R. Banerjee, Y. Wang, and H.L. Fraser: Acta Mater., 2016, vol. 103, pp. 850–58.10.1016/j.actamat.2015.11.020 ↗
15. A. Boyne, D. Wang, R.P. Shi, Y. Zheng, A. Behera, S. Nag, J.S. Tiley, H.L. Fraser, R. Banerjee, and Y. Wang: Acta Mater., 2014, vol. 64, pp. 188–97.10.1016/j.actamat.2013.10.026 ↗
16. S. Roy, S. Suwas, S. Tamirisakandala, D.B. Miracle, and R. Srinivasan: Acta Mater., 2011, vol. 59, pp. 5494–510.10.1016/j.actamat.2011.05.023 ↗
17. D.M. Stefanescu and R. Ruxanda: in: G.F. Vander Voort, ed., Metallography and Microstructures, ASM International, Materials Park, OH, 2004.
18. J. Ilavsky, F. Zhang, R.N. Andrews, I. Kuzmenko, P.R. Jemian, L.E. Levine, and A.J. Allen: J. Appl. Crystallogr., 2018, vol. 51, pp. 867–82.10.1107/S160057671800643X ↗
19. P.A. Kobryn and S.L. Semiatin: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 685–95.10.1007/s11663-001-0123-6 ↗
20. Z. Liang, I. Zhirnov, F. Zhang, K.K. Jones, D. Deisenroth, M. Williams, U. Kattner, K. Moon, W. Liu, B. Lanes, and C.E. Campbell: Materialia, 2020, vol. 14, 100934.10.1016/j.mtla.2020.100934 ↗
21. J.F. Murdock, T.S. Lundy, and E.E. Stansbury: Acta Metall., 1964, vol. 12, pp. 1033–039.10.1016/0001-6160(64)90075-6 ↗
22. R.J. Borg and C.E. Birchenall: Trans. Met. Soc. AIME, 1960, vol. 218, pp. 980–84.
23. I.A. Akimova, V.M. Mironov, and A.V. Pokoyev: Fiz. Met. Metall., 1983, vol. 56, pp. 1225–227.
24. H. Araki, T. Yamane, Y. Minamino, S. Saji, Y. Hana, and S.B. Jung: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 874–76.10.1007/BF02665465 ↗
25. H. Wu, T. Mayeshiba, and D. Morgan: Sci. Data, 2016, https://doi.org/10.1038/sdata.2016.54.10.1038/sdata.2016.54 ↗
26. G.B. Gibbs, D. Graham, and D.H. Tomlin: Philos. Mag., 1963, vol. 8, pp. 1269–282.10.1080/14786436308207292 ↗
27. ThermoCalc: The Precipitation Module (TC-PRISMA) User Guide 2020a. https://www.thermocalc.com/support/documentation/, Accessed June 30 2019.
28. H.I. Aaronson, M. Enomoto, and J.K. Lee: Mechanisms of Diffusional Phase Transformations in Metals and Alloys, CRC Press, Boca Raton, FL, 2016.10.1201/b15829 ↗
29. R. Wagner, R. Kampmann, and P.W. Voorhees: in: G. Kostorz, ed., Phase Transformations in Materials, Wiley-VCH Verlag GmbH, Weinheim, Germany, 2001, pp. 309–407.10.1002/352760264X.ch5 ↗
30. R. Shi, N. Ma, and Y. Wang: Acta Mater., 2012, vol. 60, pp. 4172–184.10.1016/j.actamat.2012.04.019 ↗
31. G. Lindwall, U. Kattner, and C.E. Campbell: Materials Data Curation System: Self diffusion and impurity diffusion, NIST, Gaithersburg, 2017.
32. J.L. Murray: Bull. Alloy Phase Diagrams, 1981, vol. 2, pp. 320–34.10.1007/BF02868286 ↗
33. S. Kirklin, J.E. Saal, B. Meredig, A. Thompson, J.W. Doak, M. Aykol, S. Rühl, and C. Wolverton: Comput. Mater., 2015, vol. 1, p. 15010.10.1038/npjcompumats.2015.10 ↗
34. J.E. Saal, S. Kirklin, M. Aykol, B. Meredig, and C. Wolverton: JOM, 2013, vol. 65, pp. 1501–509.10.1007/s11837-013-0755-4 ↗
35. X.-G. Lu, M. Selleby, and B. Sundman: CALPHAD, 2005, vol. 29, pp. 68–89.10.1016/j.calphad.2005.05.001 ↗
36. J. Ilavsky and P.R. Jemian: J. Appl. Crystallogr., 2009, vol. 42, pp. 347–53.10.1107/S0021889809002222 ↗