Investigating the Effects of Dendrite Evolution on Microsegregation in Al–Cu Alloys by Coupling Experiments, Micro-modeling, and Phase-Field Simulations
Source abstract
Abstract
The microsegregation that occurs in Al–Cu alloys during solidification processes was quantitatively characterized using Electron Probe Micro-Analysis (EPMA) and examined by analytical micro-models of microsegregation as well as phase-field simulations. The analysis of EPMA data showed a pronounced increase in microsegregation of Cu solute at low and intermediate solid fractions during directional solidification. This initial increase of solute concentration in the solid cannot be readily explained by any conventional analytical models. In this study, the effect of dendritic evolution on microsegregation was systematically investigated, and the observed increase in Cu solute can be predicted by a comprehensive micro-model developed in this study. This micro-model considers constitutional undercooling, back diffusion, and the dendrite remelting that can occur during solidification. A semi-empirical prefactor that accounts for dendrite remelting was mathematically derived and was determined to be key to capturing the initial increase of solute concentration. The model further indicates that the influence of dendrite remelting continually increases until solid fractions of approximately 50 pct are reached after which the influence of dendrite remelting declines. The comprehensive micro-model is analytical and straightforward to implement. It is able to accurately predict the solute microsegregation behavior observed under a variety of solidification conditions. In addition, the microsegregation and dendrite morphology evolution were simulated using a quantitative phase-field model for binary alloy solidification, implemented as a new application within the open-source PRISMS-PF phase-field framework. This application was used to simulate solidification of Al–Cu alloys in 2D and 3D. The combined experimental and theoretical study demonstrated that microsegregation can be significantly influenced by dendritic evolution, especially at low cooling rates under conditions that promote columnar growth.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. J.A. Sarreal and G.J. Abbaschian: Metall. Trans. A, 1986, vol. 17, pp. 2063–73.10.1007/BF02645003 ↗
2. J.F. Grandfield, D.G. Eskin, and I.F. Bainbridge: Direct-Chill Casting of Light Alloys, 2013.10.1002/9781118690734 ↗
3. Q. Du, D.G. Eskin, A. Jascot, and L. Katgerman: Acta Mater., 2007, vol. 55, pp. 1523–32.10.1016/j.actamat.2006.10.035 ↗
4. G. Kasperovich, T. Volkmann, L. Ratke, and D. Herlach: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1183–91.10.1007/s11661-008-9505-6 ↗
5. E.C. Kurum, H.B. Dong, and J.D. Hunt: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3103–10.10.1007/s11661-005-0082-7 ↗
6. J.L. Murray: Int. Met. Rev., 1985, vol. 30, pp. 211–33.10.1179/imr.1985.30.1.211 ↗
7. X. Yan, S. Chen, F. Xie, and Y.A. Chang: Acta Mater., 2002, vol. 50, pp. 2199–2207.10.1016/S1359-6454(01)00431-1 ↗
8. M. Ohno, M. Yamashita, and K. Matsuura: Int. J. Heat Mass Transf., 2019, vol. 132, pp. 1004–07.10.1016/j.ijheatmasstransfer.2018.12.055 ↗
9. E. Scheil: Zeitschrift Metallkde, 1942, vol. 34, pp. 70–72.
10. H.D. Brody and M.C. Flemings: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 615–24.
11. T.W. Clyne and W. Kurz: Metall. Trans. A, 1981, vol. 12A, pp. 965–71.10.1007/BF02643477 ↗
12. B. Giovanola and W. Kurz: Metall. Trans. A, 1990, vol. 21, pp. 260–63.10.1007/BF02656445 ↗
13. M.J. Aziz: J. Appl. Phys., 1982, vol. 53, pp. 1158–68.10.1063/1.329867 ↗
14. Y.-J. Liang, X. Cheng, and H.-M. Wang: Acta Mater., 2016, vol. 118, pp. 17–27.10.1016/j.actamat.2016.07.008 ↗
15. Y.H. Shin, M.S. Kim, K.S. Oh, E.P. Yoon, and C.P. Hong: ISIJ Int., 2001, vol. 41, pp. 158–63.10.2355/isijinternational.41.158 ↗
16. L. Nastac and D.M. Stefanescu: Metall. Trans. A, 1993, vol. 24, pp. 2107–18.10.1007/BF02666344 ↗
17. A. Mortensen: Metall. Trans. A, 1989, vol. 20, pp. 247–53.10.1007/BF02670250 ↗
18. V.R. Voller and C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3016–19.10.1007/s11661-999-0141-6 ↗
19. V.R. Voller and C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2183–89.10.1007/s11661-999-0030-z ↗
20. Y.M. Won and B.G. Thomas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1755–67.10.1007/s11661-001-0152-4 ↗
21. J.S. Langer: Directions in Condensed Matter Physics, 1986, pp. 165–86.10.1142/9789814415309_0005 ↗
22. R. Kobayashi: Physica D, 1993, vol. 63, pp. 410–23.10.1016/0167-2789(93)90120-P ↗
23. R. Kobayashi: Exp. Math., 1994, vol. 3, pp. 59–81.10.1080/10586458.1994.10504577 ↗
24. J.C. Ramirez, C. Beckermann, A. Karma, and H.J. Diepers: Phys. Rev. E, 2004, vol. 69, p. 16.10.1103/PhysRevE.69.051607 ↗
25. A. Karma: Phys. Rev. Lett., 2001, vol. 87, pp. 115701-1–15701-4.
26. B. Echebarria, R. Folch, A. Karma, and M. Plapp: Phys. Rev. E, 2004, vol. 70, p. 22.10.1103/PhysRevE.70.061604 ↗
27. W.J. Boettinger, J.A. Warren, C. Beckermann, and A. Karma: Annu. Rev. Mater. Res., 2002, vol. 32, pp. 163–94.10.1146/annurev.matsci.32.101901.155803 ↗
28. B. Nestler, H. Garcke, and B. Stinner: Phys. Rev. E, 2005, vol. 71, p. 041609.10.1103/PhysRevE.71.041609 ↗
29. D. Montiel, L. Liu, L. Xiao, Y. Zhou, and N. Provatas: Acta Mater., 2012, vol. 60, pp. 5925–32.10.1016/j.actamat.2012.07.035 ↗
30. A. Karma and W.J. Rappel: Phys. Rev. E, 1998, vol. 57, pp. 4323–49.10.1103/PhysRevE.57.4323 ↗
31. A. Farzadi, M. Do-Quang, S. Serajzadeh, A.H. Kokabi, and G. Amberg: Modell. Simul. Mater. Sci. Eng., 2008, vol. 16, p. 065005. https://doi.org/10.1088/0965-0393/16/6/065005.10.1088/0965-0393/16/6/065005 ↗
32. H. Neumann-Heyme, K. Eckert, and C. Beckermann: Acta Mater., 2017, vol. 140, pp. 87–96.10.1016/j.actamat.2017.08.021 ↗
33. M. Ohno and K. Matsuura: Phys. Rev. E, 2009, vol. 79, p. 031603. https://doi.org/10.1103/PhysRevE.79.031603.10.1103/PhysRevE.79.031603 ↗
34. M. Ohno: Phys. Rev. E, 2012, vol. 86, p. 51603.10.1103/PhysRevE.86.051603 ↗
35. S. DeWitt, S. Rudraraju, D. Montiel, W.B. Andrews, and K. Thornton: npj Comput. Mater., 2020, vol. 6, pp. 1–2.10.1038/s41524-020-0298-5 ↗
36. Z. Yao, Y. Huo, M. Li, et al.: Metall. Mater. Trans. A, 2022, https://doi.org/10.1007/s11661-022-06669-3.10.1007/s11661-022-06669-3 ↗
37. M. Ganesan, D. Dye, and P.D. Lee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2191–2204.10.1007/s11661-005-0338-2 ↗
38. M. Ganesan, L. Thuinet, D. Dye, and P.D. Lee: Metall. Mater. Trans. B., 2007, vol. 38B, pp. 557–66.10.1007/s11663-007-9071-0 ↗
39. K.P. Young and D.H. Kerkwood: Metall. Trans. A, 1975, vol. 6, pp. 197–205.10.1007/BF02673688 ↗
40. G. Horvay and J.W. Cahn: Acta Metall., 1961, vol. 9, pp. 695–705.10.1016/0001-6160(61)90008-6 ↗
41. J.G. Charney, R. FjÖrtoft, and J. Von Neumann: Tellus, 1950, vol. 2, pp. 237–54.10.3402/tellusa.v2i4.8607 ↗
42. D. Montiel and Z. Yao: PRISMS-PF AlloySolidification Documentation, 2021.
43. Z. Yao: PhD Disssertation, University of Michigan-Ann Arbor, 2021.
44. B.B. Rath: Mater. Sci. Eng. B, 1995, vol. 32, pp. 101–06.10.1016/0921-5107(95)03001-8 ↗