journal article·2022-08Open access

Mechanisms of Densification and Bonding in the Ultrasonic Consolidation of Aluminum Powder

Huang Huang, Teiichi Ando

Abstract

The densification and bonding of aluminum powder subjected to ultrasonic vibration under uniaxial pressure were characterized and their mechanisms were investigated by transmission electron microscopy (TEM). Full densification was achieved in just 1 second at a nominal consolidation temperature of 573 K and in 4 seconds at 473 K. The particle shape-change required for densification occurs by rapid plastic deformation, associated with dynamic recovery and continuous dynamic recrystallization, and repetitive formation and transfer of supercooled liquid into the particle interstices where the liquid solidifies into layers of amorphous and nanocrystalline aluminum. The liquid transfer also provides oxide-free surfaces required for metallurgical bonding at the particle junctions. The occurrence of rapid plastic deformation and formation of supercooled liquid is explained by the effects of excess vacancies generated in the deforming powder particles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. R.M. German: Powder Metallurgy Science, 2nd ed. Metal Powder Industries Federation, Princeton, NJ, 1994, pp. 242–340.
2. R.L. Coble: Powder Metall. Int., 1978, vol. 10, pp. 128–30.
3. I.E. Gunduz: Ph.D. Thesis, Northeastern University, 2006.
4. D. Erdeniz and T. Ando: Int. J. Mater. Res., 2013, vol. 104, pp. 386–91.10.3139/146.110874 ↗
5. S. Gheybi Hashemabad and T. Ando: Combust. Flame, 2015, vol. 162, pp. 1144–52.10.1016/j.combustflame.2014.10.006 ↗
6. Y. Shu, T. Ando, Q. Yin, G. Zhou, and Z. Gu: Nanoscale, 2017, vol. 9, pp. 12398–12408.10.1039/C7NR01402C ↗
7. S. Bhavsar and S. James: Addit. Manuf., 2018, vol. 21, pp. 705–12.
8. P. Chen, W.B. Liao, L.H. Liu, F. Luo, X.Y. Wu, P.J. Li, C. Yang, M. Yan, Y. Liu, L.C. Zhang, and Z.Y. Liu: Sci. Rep., 2018, vol. 8, p. 801. https://doi.org/10.1038/s41598-018-19190-8.10.1038/s41598-018-19190-8 ↗
9. E. Arzt, M.F. Ashby, and K.E. Easterling: Metall. Trans. A, 1983, vol. 14, pp. 211–21.10.1007/BF02651618 ↗
10. Z. Huang, K. Date, K. Tatsugawa, and T. Ando: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 6173–84.10.1007/s11661-018-4901-z ↗
11. B. Langenecker: IEEE Trans. Sonics Ultrason., 1966, vol. 13, pp. 1–8.10.1109/T-SU.1966.29367 ↗
12. F. Blaha and B. Langenecker: Naturwissenschaften, 1955, vol. 42, pp. 556–56.10.1007/BF00623773 ↗
13. K.C. Joshi: Weld. J., 1971, vol. 50, pp. 840–48.
14. J.E. Krzanowski: IEEE Trans. Compon. Hybrids Manuf. Technol., 1990, vol. 13, pp. 176–81.10.1109/33.52867 ↗
15. H. Ji, M. Li, and C. Wang: in 2012 13th Int. Conf. Electron. Packag. Technol. High Density Packag., 2012, pp. 302–05.10.1109/ICEPT-HDP.2012.6474623 ↗
16. H.T. Fujii, Y. Goto, Y.S. Sato, and H. Kokawa: Scripta Mater., 2016, vol. 116, pp. 135–38.10.1016/j.scriptamat.2016.02.004 ↗
17. E. Mariani and E. Ghassemieh: Acta Mater., 2010, vol. 58, pp. 2492–2503.10.1016/j.actamat.2009.12.035 ↗
18. N. Sridharan, P. Wolcott, M. Dapino, and S.S. Babu: Sci. Technol. Weld. Join., 2016, https://doi.org/10.1080/13621718.2016.1249644.10.1080/13621718.2016.1249644 ↗
19. Z. Zhang, K. Wang, J. Li, Q. Yu, and W. Cai: Sci. Rep., 2017, vol. 7, p. 12505. https://doi.org/10.1038/s41598-017-12164-2.10.1038/s41598-017-12164-2 ↗
20. M.R. Rokni, C.A. Widener, and V.R. Champagne: J. Therm. Spray Technol., 2014, vol. 23, pp. 514–24.10.1007/s11666-013-0049-y ↗
21. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130–207.10.1016/j.pmatsci.2013.09.002 ↗
22. C. Borchers, F. Gärtner, T. Stoltenhoff, and H. Kreye: J. Appl. Phys., 2004, vol. 96, pp. 4288–92.10.1063/1.1789278 ↗
23. M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, and Q. Xue: Mater. Sci. Eng. A, 2001, vol. 317, pp. 204–25.10.1016/S0921-5093(01)01160-1 ↗
24. W.C. Evans, X. Dan, A. Houshmand, S. Müftü, and T. Ando: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 3937–48.10.1007/s11661-019-05303-z ↗
25. Y. Li, Y. Hamada, K. Otobe, and T. Ando: J. Therm. Spray Technol., 2017, vol. 26, pp. 350–59.10.1007/s11666-016-0517-2 ↗
26. H. Ohkubo, Z. Tang, Y. Nagai, M. Hasegawa, T. Tawara, and M. Kiritani: Mater. Sci. Eng. A, 2003, vol. 350, pp. 95–101.10.1016/S0921-5093(02)00705-0 ↗
27. M. Kiritani, Y. Satoh, Y. Kizuka, K. Arakawa, Y. Ogasawara, S. Arai, and Y. Shimomura: Philos. Mag. Lett., 1999, vol. 79, pp. 797–804.10.1080/095008399176616 ↗
28. J. Awatani, K. Katagiri, and A. Koreeda: Bull. JSME, 1969, vol. 12, pp. 940–46.10.1299/jsme1958.12.940 ↗
29. A.L. Greer: Nat. Mater., 2015, vol. 14, pp. 542–46.10.1038/nmat4292 ↗
30. Q. An, S.N. Luo, W.A. Goddard, W.Z. Han, B. Arman, and W.L. Johnson: Appl. Phys. Lett., 2012, vol. 100, 041909.10.1063/1.3675909 ↗
31. P. Uthe: Solid State Technol., 1969, vol. 12, pp. 72–77.
32. C. Plough, D. Davis, and H. Lawler: in Proc. Electron. Compon. Conf., 1969, pp 157–65.
33. T. Hu, S. Zhalehpour, A. Gouldstone, S. Muftu, and T. Ando: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2545–52.10.1007/s11661-014-2203-7 ↗
34. I.E. Gunduz, T. Ando, E. Shattuck, P.Y. Wong, and C.C. Doumanidis: Scripta Mater., 2005, vol. 52, pp. 939–43.10.1016/j.scriptamat.2004.12.015 ↗
35. T. Enjo, K. Ikeuchi, and H. Fujita: Trans. JWRI, 1986, vol. 15, pp. 289–96.
36. S. Yadav and C.C. Doumanidis: J. Manuf. Process., 2005, vol. 7, pp. 153–61.10.1016/S1526-6125(05)70092-X ↗
37. H.J. Fecht: Nature, 1992, vol. 356, pp. 133–35.10.1038/356133a0 ↗
38. J. Koike, D.M. Parkin, and M. Nastasi: J. Mater. Res., 1990, vol. 5, pp. 1414–18.10.1557/JMR.1990.1414 ↗
39. H.J. McQueen: Dynamic Recovery and Recrystallization, Elsevier, Oxford, 2001, pp. 2375–81.
40. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
41. R.W. Balluffi and D.N. Seidman: J. Appl. Phys., 1965, vol. 36, pp. 2708–11.10.1063/1.1714566 ↗
42. K. Murty, K. Detemple, O. Kanert, and J. Dehosson: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 153–59.10.1007/s11661-998-0168-0 ↗
43. T. Ando and A. Houshmand: Materialia, 2019, vol. 8, 100472.10.1016/j.mtla.2019.100472 ↗
44. H. Yamagata: Acta Metall. Mater., 1995, vol. 43, pp. 723–29.10.1016/0956-7151(94)00267-L ↗
45. R. Sandström and R. Lagneborg: Acta Metall., 1975, vol. 23, pp. 387–98.10.1016/0001-6160(75)90132-7 ↗