journal article·2022-03

The Effect of Heat Treatment on the Mechanical Behavior of Commercially Pure Titanium and Zirconium Under Quasi-static and Dynamic Loading

Sagi Chen, Daniel Tubul, Arie Venkert, Daniel Rittel

Publisher page

Abstract

The mechanical properties (stress–strain behavior) of three hexagonal metals, two grades of commercially pure titanium (CP-Ti) and zirconium (CP-Zr), are systematically characterized before and after heat treatment. Those materials are investigated under quasi-static (< 1 s−1) and dynamic (> 2000 s−1) tension, compression, dominant, and pure shear to draw general conclusions as to the effect of the same heat treatment and, specifically, dynamic shear failure propensity in those hexagonal materials. The results do not reveal any consistent influence of the texture on the overall quasi-static and dynamic mechanical (stress–strain) response of the investigated materials. However, when the propensity to dynamic shear failure is specifically considered, it appears that texture variations of the CP-Ti grades have more influence than purely microstructural changes resulting from the heat treatment for both materials. When no other changes than grain growth are induced, such as in the case of CP-Zr, it appears that grain growth does not significantly affect the dynamic shear failure toughness of this material. It therefore seems like no general conclusions can be drawn as to the effect of heat treatment and associated texture changes of these three hexagonal metals on their mechanical and failure properties. Thus, despite their common crystallographic features, those materials must be considered individually rather than as belonging to the general family of hexagonal metals.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. L. Anand, K.H. Kim, and T.G. Shawki: J. Mech. Phys. Solids., 1987, vol. 35, pp. 407–29.10.1016/0022-5096(87)90045-7 ↗
2. J.R. Rice: Conf. 14. Int. Congr. Theor. Appl. Mech., 1976.
3. H. Yamamoto: Int. J. Fract., 1978, vol. 14, pp. 347–65.10.1007/BF00015989 ↗
4. Z. Lovinger, A. Rikanati, Z. Rosenberg, and D. Rittel: Int. J. Impact Eng., 2011, vol. 38, pp. 918–29.10.1016/j.ijimpeng.2011.06.006 ↗
5. Z. Lovinger, D. Rittel, and Z. Rosenberg: J. Mech. Phys. Solids., 2015, vol. 79, pp. 134–56.10.1016/j.jmps.2015.04.007 ↗
6. Y.J. Chen, M.A. Meyers, and V.F. Nesterenko: Mater. Sci. Eng. A., 1999, vol. 268, pp. 70–82.10.1016/S0921-5093(99)00110-0 ↗
7. A.A. Benzerga and J.-B. Leblond: Adv. Appl. Mech., 2010, vol. 44, pp. 169–305.10.1016/S0065-2156(10)44003-X ↗
8. S. Chen and S. Osovski: Eur. J. Mech. A., 2019, vol. 80, p. 103909.10.1016/j.euromechsol.2019.103909 ↗
9. S. Choi, C. Li, J. Woo, J. Yeom, and Y. Suk: Mater. Sci. Eng. A., 2019, vol. 764, p. 138211.10.1016/j.msea.2019.138211 ↗
10. G. Purcek, G.G. Yapici, I. Karaman, and H.J. Maier: Mater. Sci. Eng. A., 2011, vol. 528, pp. 2303–8.10.1016/j.msea.2010.11.021 ↗
11. Q. Li, Y.B. Xu, and M.N. Bassim: J. Mater. Process. Technol., 2004, vol. 155–156, pp. 1889–92.10.1016/j.jmatprotec.2004.04.327 ↗
12. A. Foul, C. Aranas Jr., B. Guo, and J.J. Jonas: Mater. Sci. Eng. A., 2018, vol. 722, pp. 156–9.10.1016/j.msea.2018.02.097 ↗
13. S. Nemat-Nasser, W.G. Guo, and J.Y. Cheng: Acta Mater., 1999, vol. 47, pp. 3705–20.10.1016/S1359-6454(99)00203-7 ↗
14. J.L. Sun, P.W. Trimby, F.K. Yan, X.Z. Liao, N.R. Tao, and J.T. Wang: Acta Mater., 2014, vol. 79, pp. 47–58.10.1016/j.actamat.2014.07.011 ↗
15. M.A. Meyers, G. Subhash, B.K. Kad, and L. Prasad: Mech. Mater., 1994, vol. 17, pp. 175–93.10.1016/0167-6636(94)90058-2 ↗
16. S. Osovski, D. Rittel, P. Landau, and A. Venkert: Scripta Mater., 2012, vol. 66, pp. 9–12.10.1016/j.scriptamat.2011.09.014 ↗
17. R. Fadida, A. Shirizly, and D. Rittel: Int. J. Eng. Sci., 2019, vol. 141, pp. 1–15.10.1016/j.ijengsci.2019.05.003 ↗
18. R. Fadida, A. Shirizly, and D. Rittel: Mech. Mater., 2020, vol. 147, p. 103413.10.1016/j.mechmat.2020.103413 ↗
19. B. Plunkett, O. Cazacu, and F. Barlat: Int. J. Plast., 2008, vol. 24, pp. 847–66.10.1016/j.ijplas.2007.07.013 ↗
20. D. Rittel, L.H. Zhang, and S. Osovski: J. Mech. Phys. Solids., 2017, vol. 107, pp. 96–114.10.1016/j.jmps.2017.06.016 ↗
21. N. Yan, Z. Li, Y. Xu, and M.A. Meyers: Prog. Mater. Sci., 2020, vol. 119, p. 100755.10.1016/j.pmatsci.2020.100755 ↗
22. H.R. Wenk, I. Lonardelli, and D. Williams: Acta Mater., 2004, vol. 52, pp. 1899–907.10.1016/j.actamat.2003.12.029 ↗
23. G. Lütjering and J.C. Williams: Titanium, 2nd ed. Springer, Berlin, 2007.
24. J. Romero, M. Preuss, and J. Quinta da Fonseca: Acta Mater., 2009, vol. 57, pp. 5501–11.10.1016/j.actamat.2009.07.046 ↗
25. A. Dorogoy, D. Rittel, and A. Godinger: Exp. Mech., 2016, vol. 56, pp. 437–49.10.1007/s11340-015-0106-1 ↗
26. D. Rittel, S. Lee, and G. Ravichandran: Exp. Mech., 2002, vol. 42, pp. 58–64.10.1007/BF02411052 ↗
27. A. Dorogoy and D. Rittel: Exp. Mech., 2017, vol. 57, pp. 1509–14.10.1007/s11340-017-0315-x ↗
28. A. Dorogoy, D. Rittel, and A. Godinger: Exp. Mech., 2015, https://doi.org/10.1007/s11340-015-0057-6.10.1007/s11340-015-0057-6 ↗
29. H. Kolsky: Proc. Phys. Soc. Sect. B., 1949, vol. 62, pp. 676–700.10.1088/0370-1301/62/11/302 ↗
30. B. Hopkinson: Philos. Trans. R. Soc. Lond., 1914, vol. 213, pp. 437–56.10.1098/rsta.1914.0010 ↗
31. D.S. Simulia: Abaqus Anal. User’s Guide, 2020.
32. R. Fadida, D. Rittel, and A. Shirizly: J. Appl. Mech., 2015, vol. 82, p. 041004.10.1115/1.4029745 ↗
33. R. Fadida and D. Rittel: J. Appl. Mech., 2018, vol. 85, pp. 1–10.10.1115/1.4039048 ↗
34. M.S. Oh, J. Lee, and J.K. Park: Metall. Mater. Trans. A., 2004, vol. 35A, pp. 3071–7.10.1007/s11661-004-0052-5 ↗
35. V.A. Joshi: Titanium Alloys: An Atlas of Structures and Fracture Features, Taylor & Francis Group, Routledge, 2006.
36. D. Rittel, Z.G. Wang, and M. Merzer: Phys. Rev. Lett., 2006, vol. 96, pp. 1–4.10.1103/PhysRevLett.96.075502 ↗
37. D. Ghosh, O.T. Kingstedt, and G. Ravichandran: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 14–9.10.1007/s11661-016-3825-8 ↗
38. H.A. Padilla, C.D. Smith, J. Lambros, A.J. Beaudoin, and I.M. Robertson: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 2916–27.10.1007/s11661-007-9365-5 ↗
39. P. Dobroň, F. Chmelík, S. Yi, K. Parfenenko, D. Letzig, and J. Bohlen: Scripta Mater., 2011, vol. 65, pp. 424–7.10.1016/j.scriptamat.2011.05.027 ↗
40. F.J. Dunkerley, F. Pledger, V. Damiano, and J. Fulton: JOM., 1951, vol. 3, pp. 1003–8.10.1007/BF03397411 ↗