journal article·2022-01Open access

Addition of Nickel by the Watts Bath as a Way to Correct the Phase Balance on Nd:YAG Pulsed-Laser-Welded UNS S32750

Eli J. da Cruz Junior, Bruna B. Seloto, Vicente A. Ventrella, Alessio G. Settimi, Claudio Gennari, Irene Calliari, Andrea Zambon

Abstract

Obtaining a balanced microstructure in the fusion zone on a super duplex stainless steel (SDSS) weld is a challenge. The present work reports the use of the Watts bath to correct the phase balance on laser-welded SDSS. Three different Watts bath times were used, and the microstructure of the weld bead was evaluated. The Watts bath was efficient to correct the undesirable unbalanced microstructure resulting from SDSS laser welding as the austenite percentage increased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Y. Hu, Y. Shi, X. Shen, and Z. Wang: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 3306–20.10.1007/s11661-018-4686-0 ↗
2. S. Saravan, K. Raghukandan, and N. Sivagurumanikandan: J. Manuf. Process., 2017, vol. 25, pp. 284–9.10.1016/j.jmapro.2016.12.015 ↗
3. K. Devendranath Ramkumar, G. Thiruvengatam, S.P. Sudharsan, D. Mishra, and N. Arivazhagan: Mater. Des., 2014, vol. 60, pp. 125–35.10.1016/j.matdes.2014.03.031 ↗
4. D. Arun, K. Devendranath Ramkumar, and R. Vimala: J. Mater. Process. Technol., 2019, vol. 271, pp. 126–43.10.1016/j.jmatprotec.2019.03.031 ↗
5. K. Devendranath Ramkumar, A.H. Dagur, A.A. Kartha, M.A. Subodh, C. Vishnu, D. Arun, M.G.V. Kumar, W.S. Abraham, A. Chatterjee, J. Abraham, and J. Abraham: J. Manuf. Process., 2017, vol. 30, pp. 27–40.10.1016/j.jmapro.2017.09.001 ↗
6. N. Ouali, K. Khenfer, B. Belkessa, J. Fajoui, B. Chenit, B. Idir, and S. Branchu: J. Mater. Eng. Perform., 2019, vol. 28, pp. 4252–64.10.1007/s11665-019-04194-w ↗
7. Z. Zhang, Z. Wang, Y. Jiang, H. Tan, D. Han, Y. Guo, and J. Li: Corros. Sci., 2012, vol. 62, pp. 42–50.10.1016/j.corsci.2012.04.047 ↗
8. Y. Yang, Z. Wang, H. Tan, J. Hong, Y. Jiang, L. Jiang, and J. Li: Corros. Sci., 2012, vol. 65, pp. 472–80.10.1016/j.corsci.2012.08.054 ↗
9. Z. Zhang, H. Zhao, H. Zhang, J. Hu, and J. Jin: Corros. Sci., 2017, vol. 121, pp. 22–31.10.1016/j.corsci.2017.02.006 ↗
10. B. Varbai and K. Májlinger: Metals., 2019, vol. 9, p. 762.10.3390/met9070762 ↗
11. V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, and S. Sundaresan: Mater. Sci. Eng. A., 2003, vol. 358, pp. 9–16.10.1016/S0921-5093(03)00077-7 ↗
12. V. Muthupandi, P. Bala Srinivasan, V. Shankar, S.K. Seshadri, and S. Sundaresan: Mater. Lett., 2005, vol. 59, pp. 2305–9.10.1016/j.matlet.2005.03.010 ↗
13. K. Migiakis and G.D. Papadimitriou: J. Mater. Sci., 2009, vol. 44, pp. 6372–83.10.1007/s10853-009-3878-9 ↗
14. J. Pilhagen and R. Sandström: Mater. Sci. Eng. A., 2014, vol. 602, pp. 49–57.10.1016/j.msea.2014.01.093 ↗
15. A. Tahaei, A.F.M. Perez, M. Merlin, F.A.R. Valdes, and G.L. Garagnani: Soldag. Insp., 2016, vol. 21(2), pp. 197–208.10.1590/0104-9224/SI2102.09 ↗
16. Z. Zhang, H. Jing, L. Xu, Y. Han, L. Zhao, and C. Zhou: Appl. Surf. Sci., 2017, vol. 404, pp. 110–28.10.1016/j.apsusc.2017.01.252 ↗
17. E.J. Da Cruz Junior, O.D. Franzini, I. Calliari, and V.A. Ventrella: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 1616–8.10.1007/s11661-019-05115-1 ↗
18. E.J. da Cruz Junior, J. Gallego, A.G. Settimi, C. Gennari, A. Zambon, and V.A. Ventrella: J. Mater. Eng. Perform., 2021, vol. 30, pp. 3024–32.10.1007/s11665-021-05590-x ↗
19. A.F.M. Salcedo, F.C. Ballesteros, A.C. Vilando, and M.-C. Lu: Sep. Purif. Technol., 2016, vol. 169, pp. 128–36.10.1016/j.seppur.2016.06.010 ↗
20. B.-W. Wang, C.-Y. Lee, and H.-B. Lee: Surf. Coat. Technol., 2018, vol. 337, pp. 232–40.10.1016/j.surfcoat.2018.01.027 ↗
21. I. Rose and C. Whittington: Nickel Planting Handbook, 1st ed. Nickel Institute, Durham, 2014, pp. 13–6.
22. G.R. Mohammed, M. Ishak, S.N. Aqida, and H.A. Abdulhadi: Metals., 2017, vol. 7, p. 39.10.3390/met7020039 ↗
23. J. Verma and R.V. Taiwade: J. Manuf. Process., 2017, vol. 25, pp. 134–52.10.1016/j.jmapro.2016.11.003 ↗
24. J. Singh and A.S. Shahi: J. Mater. Process. Technol., 2019, vol. 272, pp. 137–48.10.1016/j.jmatprotec.2019.05.010 ↗
25. R. Badji, M. Bouabdallah, B. Brcroix, C. Kahloun, B. Belkessa, and H. Maza: Mater. Charact., 2003, vol. 59(4), pp. 447–53.10.1016/j.matchar.2007.03.004 ↗
26. D.H. Kang and H.W. Lee: Corros. Sci., 2013, vol. 74, pp. 396–407.10.1016/j.corsci.2013.04.033 ↗
27. S. Saravanan, N. Sivagurumanikandan, and K. Raghukandan: Optik., 2019, vol. 185, pp. 447–55.10.1016/j.ijleo.2019.03.145 ↗