journal article·2021-04Open access

In-Situ Synchrotron X-ray Diffraction Investigation of Microstructural Evolutions During Low-Pressure Carburizing

Ogün Baris Tapar, Jérémy Epp, Matthias Steinbacher, Jens Gibmeier

Abstract

Abstract An experimental heat treatment chamber and control system were developed to performin-situX-ray diffraction experiments during low-pressure carburizing (LPC) processes. Results from the experimental chamber and industrial furnace were compared, and it was proven that the built system is reliable for LPC experiments.In-situX-ray diffraction investigations during LPC treatment were conducted at the German Electron Synchrotron Facility in Hamburg Germany. During the boost steps, carbon accumulation and carbide formation was observed at the surface. These accumulation and carbide formation decelerated the further carbon diffusion from atmosphere to the sample. In the early minutes of the diffusion steps, it is observed that cementite content continue to increase although there is no presence of gas. This effect is attributed to the high carbon accumulation at the surface during boost steps which acts as a carbon supply. During quenching, martensite at higher temperature had a lowerc/aratio than later formed ones. This difference is credited to the early transformation of austenite regions having lower carbon content. Also, it was noticed that the final carbon content dissolved in martensite reduced compared to carbon in austenite before quenching. This reduction was attributed to the auto-tempering effect.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. 1 E.J. Mittemeijer and M.A.J. Somers: Thermochemical Surface Engineering of Steels: Improving Materials Performance, Woodhead Publishing., Cambridge, 2015, pp 485-553
2. 2 B. Clausen, E. Hoffmann, and H.W. Zoch: HTM - J. Heat Treat. Mater., 2008, vol. 63, pp. 326–36.10.3139/105.100473 ↗
3. 3 A. von Starck, A. Mühlbauer, and C. Kramer: Handbook of Thermoprocessing Technologies: Fundamentals, Processes, Components, Safety, Vulkan-Verlag GmbH, 2005.
4. M. Steinbacher: Universität Bremen, PhD Thesis 2012.
5. D.H. Herring and R.V. Peters Jr.: Gear Technol.
6. 6 H. Altena and F. Schrank: HTM - Haerterei-Technische Mitteilungen, 2002, vol. 57, pp. 247–56.
7. 7 H. Altena: HTM – Härterei Tech. Mitteilungen, 1994, vol. 49 (1), pp. 58–63.
8. 8 K. Yada and O. Watanabe: Comput. Fluids, 2013, vol. 79, pp. 65–76.10.1016/j.compfluid.2013.03.005 ↗
9. 9 R. Gorockiewicz: Vacuum, 2011, vol. 86, pp. 448–51.10.1016/j.vacuum.2011.09.006 ↗
10. 10 M.Y. Semenov, A.E. Smirnov, and M.Y. Ryzhova: Met. Sci. Heat Treat., 2013, vol. 55, pp. 38–42.10.1007/s11041-013-9576-x ↗
11. 11 M. Steinbacher, B. Clausen, F. Hoffmann, P. Mayr, and H.W. Zoch: HTM - Haerterei-Technische Mitteilungen, 2006, vol. 61, pp. 186–94.10.3139/105.100385 ↗
12. 12 H. Ikehata, K. Tanaka, H. Takamiya, and H. Mizuno: ISIJ Int., 2012, vol. 52, pp. 1348–55.10.2355/isijinternational.52.1348 ↗
13. 13 V.A. Esin, B. Denand, Q. Le Bihan, M. Dehmas, J. Teixeira, G. Geandier, S. Denis, T. Sourmail, and E. Aeby-Gautier: Acta Mater., 2014, vol. 80, pp. 118–31.10.1016/j.actamat.2014.07.042 ↗
14. 14 M. Villa, K. Pantleon, and M.A.J. Somers: J. Alloys Compd., 2013, vol. 557, pp. 543–8.10.1016/j.jallcom.2011.12.162 ↗
15. J. Epp, T. Hirsch, and C. Curfs: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2012, vol. 43, pp. 2210–17.10.1007/s11661-012-1087-7 ↗
16. 16 F. Niessen, M. Villa, F. Danoix, J. Hald, and M.A.J. Somers: Scr. Mater., 2018, vol. 154, pp. 216–9.10.1016/j.scriptamat.2018.06.004 ↗
17. 17 J. Feugeas, B. Gómez, and A. Craievich: Surf. Coatings Technol., 2002, vol. 154, pp. 167–75.10.1016/S0257-8972(02)00017-8 ↗
18. 18 J.C. Oxley, J.L. Smith, F.L. Steinkamp, J. Gorawara, and V. Kanazirev: J. Chem. Heal. Saf., 2017, vol. 24, pp. 26–33.10.1016/j.jchas.2016.06.001 ↗
19. 19 G. Ashiotis, A. Deschildre, Z. Nawaz, J.P. Wright, D. Karkoulis, F.E. Picca, and J. Kieffer: J. Appl. Crystallogr., 2015, vol. 48, pp. 510–9.10.1107/S1600576715004306 ↗
20. 20 A.A. Coelho: J. Appl. Crystallogr., 2018, vol. 51, pp. 210–8.10.1107/S1600576718000183 ↗
21. 21 J. Epp, J. Dong, H. Meyer, and A. Bohlen: Scr. Mater., 2020, vol. 177, pp. 27–31.10.1016/j.scriptamat.2019.09.021 ↗
22. 22 M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag, J.H. Root, and N.B. Konyer: Scr. Metall. Mater., 1993, vol. 29, pp. 1011–6.10.1016/0956-716X(93)90169-S ↗
23. B. Esper: Ind. Heat., 2009, N.p.
24. D.H. Herring: Therm. Process., 2012, N.p.
25. M. Sugiyama, K. Ishikawa, and H. Iwata: Adv. Mater. Process. 1999, vol. 155, pp H29–H33.
26. 26 R.J. Madix: Adv. Catal., 1980, vol. 29, pp. 1–53.10.1016/S0360-0564(08)60119-4 ↗
27. 27 R. Neubauer, C.M. Whelan, R. Denecke, and H.P. Steinrück: J. Chem. Phys., 2003, vol. 119, pp. 1710–8.10.1063/1.1582432 ↗
28. R. Byron Bird Warren E. Stewart Edwin N. Lightfoo, R.B. Bird, W.E. Stewart, and E.N. Lightfoot: Transport Phenomena, Revised 2nd Edition, John Wiley & Sons, Inc, Hoboken, 2006, pp. 580-657.
29. 29 P. Kula, R. Pietrasik, and K. Dybowski: J. Mater. Process. Technol., 2005, vol. 164–165, pp. 876–81.10.1016/j.jmatprotec.2005.02.145 ↗
30. C. Sauerborn: Shak. Verlag, PhD Thesis, 2008.
31. 31 J. Agren: Scand. J. Metall., 1990, vol. 19, pp. 2–8.
32. 32 J. Ågren and G.P. Vassilev: Mater. Sci. Eng., 1984, vol. 64, pp. 95–103.10.1016/0025-5416(84)90076-4 ↗
33. 33 C. Wert and C. Zener: J. Appl. Phys., 1950, vol. 21, pp. 5–8.10.1063/1.1699422 ↗
34. 34 A. Schneider and G. Inden: Calphad Comput. Coupling Phase Diagrams Thermochem., 2007, vol. 31, pp. 141–7.10.1016/j.calphad.2006.07.008 ↗
35. 35 B. Ozturk, V.L. Fearing, J.A. Ruth, and G. Simkovich: Solid State Ionics, 1984, vol. 12, pp. 145–51.10.1016/0167-2738(84)90141-3 ↗
36. 36 S.M.C. Van Bohemen: Mater. Sci. Technol., 2012, vol. 28, pp. 487–95.10.1179/1743284711Y.0000000097 ↗
37. A.S. Sastri and D.R.F. West: J. Iron Steel Inst., 1965.
38. P.J. Brofman and G.S. Ansell: Metall. Trans. A, Phys. Metall. Mater. Sci., 1983, vol. 14 A, pp. 1929–31.10.1007/BF02645565 ↗
39. C. Celada-Casero, C. Kwakernaak, J. Sietsma, and M.J. Santofimia: Mater. Des., 2019, vol. 178, N.p.10.1016/j.matdes.2019.107847 ↗
40. 40 S.M.C. Van Bohemen: Scr. Mater., 2013, vol. 69, pp. 315–8.10.1016/j.scriptamat.2013.05.009 ↗
41. 41 H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties: Fourth Edition, Butterworth-Heinemann Elsevier Ltd, Oxford, 2017, pp. 135-177.10.1016/B978-0-08-100270-4.00005-6 ↗
42. 42 Y. Lu, H. Yu, and R.D. Sisson: Mater. Sci. Eng. A, 2017, vol. 700, pp. 592–7.10.1016/j.msea.2017.05.094 ↗
43. Y. Lu, H. Yu, X. Cai, Y. Rong, and R.D. Sisson: in 23rd International Federation of Heat Treatment and Surface Engineering Congress 2016, IFHTSE 2016, 2016, pp. 404–9.
44. J. Epp: Universität Bremen, PhD Thesis, 2016.
45. J. Epp: in Residual Stresses 2016: ICRS-10, Materials Research Proceedings 2, 2017, pp. 283–88.
46. 46 Y. Wang, Y. Tomota, T. Ohmura, S. Morooka, W. Gong, and S. Harjo: Acta Mater., 2020, vol. 184, pp. 30–40.10.1016/j.actamat.2019.11.051 ↗
47. 47 P. Huyghe, M. Caruso, J.L. Collet, S. Dépinoy, and S. Godet: Mater. Sci. Eng. A, 2019, vol. 743, pp. 175–84.10.1016/j.msea.2018.11.065 ↗
48. M. Villa, F. Niessen, and M.A.J. Somers: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2018, vol. 49, pp. 28–40.10.1007/s11661-017-4387-0 ↗
49. J. Epp: in 23rd International Federation of Heat Treatment and Surface Engineering Congress 2016, IFHTSE 2016, 2016.
50. 50 H.K.D.H. Bhadeshia: Met. Sci., 1983, vol. 17, pp. 1–2.
51. M. Sarikaye, G. Thomas, J.W. Steeds, S.J. Barnard, and G.D.W. Smith: 1982, N.p.
52. D.H. Sherman, S.M. Cross, S. Kim, F. Grandjean, G.J. Long, and M.K. Miller: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2007, vol. 38, pp. 1698–1711.10.1007/s11661-007-9160-3 ↗
53. 53 C. Lerchbacher, S. Zinner, and H. Leitner: Micron, 2012, vol. 43, pp. 818–26.10.1016/j.micron.2012.02.005 ↗
54. 54 R.C. Thomson and M.K. Miller: Scr. Metall. Mater., 1995, vol. 32, pp. 149–54.10.1016/S0956-716X(99)80028-4 ↗
55. 55 J. Wilde, A. Cerezo, and G.D.W. Smith: Scr. Mater., 2000, vol. 43, pp. 39–48.10.1016/S1359-6462(00)00361-4 ↗
56. 56 C. Zhu, A. Cerezo, and G.D.W. Smith: Ultramicroscopy, 2009, vol. 109, pp. 545–52.10.1016/j.ultramic.2008.12.007 ↗
57. 57 L. Morsdorf, C.C. Tasan, D. Ponge, and D. Raabe: Acta Mater., 2015, vol. 95, pp. 366–77.10.1016/j.actamat.2015.05.023 ↗