journal article·2020-11Open access

Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5

A. Reitz, O. Grydin, M. Schaper

Abstract

Abstract Safety-relevant components in automobiles require materials that combine high strength with sufficient residual ductility and high-energy absorption. A graded thermo-mechanical treatment of the press-hardening steel 22MnB5 with graded microstructure can provide a material with such properties. Different austenitization temperatures, cooling and forming conditions within a sheet part lead to the development of microstructures with mixed phase compositions. To determine the resulting phase contents in such graded processed parts, a large number of dilatometric tests are usually required. With a non-contact characterization method, it is possible to detect local phase transformations on an inhomogeneously treated flat steel specimen. For press-hardening steel after heat treatment and thermo-mechanical processing, correlations between austenitization temperature, hot deformation strain, microstructure, and hardness are established.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. R. George, A. Bardelcik, and M.J. Worswick: J. Mater. Process. Technol., 2012, vol. 212, no. 11, pp. 2386–99, https://doi.org/10.1016/j.jmatprotec.2012.06.028.10.1016/j.jmatprotec.2012.06.028 ↗
2. M. Merklein, M. Wieland, M. Lechner, S. Bruschi, and A. Ghiotti: J. Mater. Process. Technol., 2016, vol. 228, pp. 11–24, https://doi.org/10.1016/j.jmatprotec.2015.09.023.10.1016/j.jmatprotec.2015.09.023 ↗
3. M. Naderi, A. Saeed-Akbari, and W. Bleck: J. Mater. Sci. Eng. A, 2008, vol. 487, 1-2, pp. 445–55, doi: 10.1016/j.msea.2007.10.057.10.1016/j.msea.2007.10.057 ↗
4. M. Schaper, G. Gershteyn, O. Grydin, D. Fassmann, Z. Yu, and F. Nürnberger: 5. Erlanger Workshop Warmblechumformung, vol. 2010, pp. 141–60.
5. H. Järvinen, M. Isakov, T. Nyyssönen, M. Järvenpää, and P. Peura: J. Mater. Sci. Eng. A, 2016, vol. 676, pp. 109–20, https://doi.org/10.1016/j.msea.2016.08.096.10.1016/j.msea.2016.08.096 ↗
6. M. Nikravesh, M. Naderi, G.H. Akbari, and W. Bleck: Mater. Des., 2015, vol. 84, pp. 18–24, https://doi.org/10.1016/j.matdes.2015.06.108.10.1016/j.matdes.2015.06.108 ↗
7. J. Min, J. Lin, and Y.A. Min: J. Mater. Process. Technol., 2013, vol. 213, no. 6, pp. 818–25, doi: 10.1016/j.jmatprotec.2012.12.012.10.1016/j.jmatprotec.2012.12.012 ↗
8. Z. Shi, K. Liu, M. Wang, J. Shi, H. Dong, J. Pu, B. Chi, Y. Zhang, and L. Jian: J. Mater. Sci. Eng. A, 2012, vol. 535, pp. 290–6, https://doi.org/10.1016/j.msea.2011.12.088.10.1016/j.msea.2011.12.088 ↗
9. J. Zhou, B.-y. Wang, M.-d. Huang, and D. Cui: Int J Miner Metall Mater, 2014, vol. 21, no. 6, pp. 544–55, https://doi.org/10.1007/s12613-014-0940-7.10.1007/s12613-014-0940-7 ↗
10. T. Nishibata and N. Kojima: J. Alloys Compd., 2013, vol. 577, pp. 549-54, https://doi.org/10.1016/j.jallcom.2011.12.154.10.1016/j.jallcom.2011.12.154 ↗
11. A. Grajcar, W. Zalecki, P. Skrzypczyk, A. Kilarski, A. Kowalski, and S. Kołodziej: J Therm Anal Calorim, 2014, vol. 118, no. 2, pp. 739–48, https://doi.org/10.1007/s10973-014-4054-2.10.1007/s10973-014-4054-2 ↗
12. M. Gojic, M. Suceska, and M. Rajic: J. Therm. Anal. Calorim., 2004, vol. 75, pp. 947–56.10.1023/B:JTAN.0000027188.58396.03 ↗
13. J. Zachrisson: Lulea University of Technology—Department of Applied Physics and Mechanical Engineering, Master Thesis, 2012, pp. 1–3.
14. R. Kumar and H. K Arya: J Material Sci Eng, 2013, vol. 03, no. 02, pp. 1-4, https://doi.org/10.4172/2169-0022.1000138.10.4172/2169-0022.1000138 ↗
15. F.S. LePera: JOM, 1980, vol. 32, no. 3, pp. 38–9, https://doi.org/10.1007/bf03354553.10.1007/BF03354553 ↗
16. G.E. Totten, M.A.H. Howes, and T. Inoue: Handbook of residual stress and deformation of steel, Materials Park, OH, ASM International, 2002, pp. 249-50.
17. M. Naderi: Hot Stamping of Ultra High Strength Steels, Dissertation, 2007, pp. 76–77.
18. O. Grydin, A. Andreiev, M.J. Holzweißig, C.J. Rüsing, K. Duschik, Y. Frolov, and M. Schaper: J. Mater. Sci. Eng. A, 2019, vol. 749, pp. 176–95, https://doi.org/10.1016/j.msea.2019.02.025.10.1016/j.msea.2019.02.025 ↗
19. H.K.D.H. Bhadeshia: Bainite in steels: Transformations, microstructure and properties, 2nd ed., London, IOM Communications, 2001, pp. 203-13.
20. H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1999, vol. 15, no. 1, pp. 22–9, https://doi.org/10.1179/026708399773002773.10.1179/026708399773002773 ↗
21. G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, no. 5, pp. 1043–54, https://doi.org/10.1007/bf02642436.10.1007/BF02642436 ↗
22. M. Pranger: Vergleich der Mikrostruktur ausgewählter hochfester Schweißungen, Diploma Thesis, 2017, pp. 46–47.
23. O. Grydin, F. Nuernberger, Y. Zou, M. Schaper, and A. Brosius: Steel Res. Int., 2014, vol. 85, no. 9, pp. 1340–47, https://doi.org/10.1002/srin.201300420.10.1002/srin.201300420 ↗
24. A. Andreiev, O. Grydin, and M. Schaper: A Rapid Heating Method for Press Hardening Processing, Cham, Springer International Publishing, 2017, pp. 723-36.
25. T. Lolla, G. Cola, B. Narayanan, B. Alexandrov, and S.S. Babu: Mater. Sci. Technol., 2011, vol. 27, no. 5, pp. 863–75, https://doi.org/10.1179/174328409x433813.10.1179/174328409X433813 ↗
26. A. Andreiev, O. Grydin, and M. Schaper: Steel Res. Int., 2016, vol. 87, no. 12, pp. 1733–41, https://doi.org/10.1002/srin.201600086.10.1002/srin.201600086 ↗
27. L. Cheng, C.M. Brakman, B.M. Korevaar, and E.J. Mittemeijer: Metall. Trans., 1988, vol. 19, no. 10, pp. 2415–26, https://doi.org/10.1007/bf02645469.10.1007/BF02645469 ↗