journal article·2012-12

Mechanical Properties of β–Ti-35Nb-2.5Sn Alloy Synthesized by Mechanical Alloying and Pulsed Current Activated Sintering

Abdel-Nasser Omran, Kee-Do Woo, Hyun Bom Lee

Publisher page

Abstract

A developed Ti-35 pct Nb-2.5 pct Sn (wt pct) alloy was synthesized by mechanical alloying using high-energy ball-milled powders, and the powder consolidation was done by pulsed current activated sintering (PCAS). The starting powder materials were mixed for 24 hours and then milled by high-energy ball milling (HEBM) for 1, 4, and 12 hours. The bulk solid samples were fabricated by PCAS at 1073 K to 1373 K (800 °C to 1100 °C) for a short time, followed by rapid cooling to 773 K (500 °C). The relative density of the sintered samples was about 93 pct. The Ti was completely transformed from α to β-Ti phase after milling for 12 hours in powder state, and the specimen sintered at 1546 K (1273 °C) was almost transformed to β-Ti phase. The homogeneity of the sintered specimen increased with increasing milling time and sintering temperature, as did its hardness, reaching 400 HV after 12 hours of milling. The Young’s modulus was almost constant for all sintered Ti-35 pct Nb-2.5 pct Sn specimens at different milling times. The Young’s modulus was low (63.55 to 65.3 GPa) compared to that of the standard alloy of Ti-6Al-4V (100 GPa). The wear resistance of the sintered specimen increased with increasing milling time. The 12-hour milled powder exhibited the best wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M.F. Lopez, A. Gutierrez, and J.A. Jimenez: Electrochimica Acta, 2002, vol. 47, pp. 1359–64.10.1016/S0013-4686(01)00860-X ↗
2. L.M. Elias, S.G. Schneider, S. Schneider, H.M. Silva, and F. Malvisi: Mater. Sci. Eng. A, 2006, vol. 432, pp. 108–112.10.1016/j.msea.2006.06.013 ↗
3. Y.L. Zhou, M. Niinomi, and T. Akahori: Mater. Sci. Eng. A, 2004, vol. 384, pp. 92–101.10.1016/j.msea.2004.05.084 ↗
4. D.M. Gordin, T. Gloriant, G. Nemtoi, R. Chelariu, N. Aelenei, A. Guillou, and D. Ansel: Mater. Lett., 2005, vol. 59, pp. 2936–41.10.1016/j.matlet.2004.09.063 ↗
5. H.-S. Kim, W.-Y. Kim, and S.-H. Lim: Scr. Mater., 2006, vol. 54, pp. 887–91.10.1016/j.scriptamat.2005.11.001 ↗
6. Y. Mantani and M. Tajima: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 315–19.10.1016/j.msea.2006.02.180 ↗
7. E. Takahashi, T. Sakurai, S. Watanabe, N. Masahashi, and S. Hanada: Mater. Trans., 2002, vol. 43, pp. 2978–83.10.2320/matertrans.43.2978 ↗
8. E. Eisenbarth, J. Breme, and H. Hildebrand: Biomaterials, 2001, vol. 2 (4), pp. 215–21.10.1515/BIOMAT.2001.2.4.203 ↗
9. H.Y. Kim, J.I. Kim, T. Inamura, H. Hosoda, and S. Miyazaki: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 839–43.10.1016/j.msea.2006.02.136 ↗
10. D.V. Shtansky, N.A. Gloushankova, A.N. Sheveiko, M.A. Kharitonova, T.G. Moizhess, E.A. Levashov, and F. Rossi: Biomaterials, 2005, vol. 26, pp. 2909–24.10.1016/j.biomaterials.2004.09.010 ↗
11. J.I. Kim, H.Y. Kim, T. Inamura, H. Hosoda, and S. Miyazaki: Mater. Sci. Eng. A, 2005, vol. 403, pp. 334–39.10.1016/j.msea.2005.05.050 ↗
12. S.H. Jang, K.H. Lee, K.H. Baik, and J. Kor: Inst. Met. Mater., 2005, vol. 43, pp. 418–23.
13. D. Eylon: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. 2., 10th ed., ASM International Handbook Committee, ASM, Materials Park, OH, 1990, pp. 90–115.
14. S. Nag, R. Banerjee, and H.L. Fraser: Acta Biomater., 2007, vol. 3, pp. 369–76.10.1016/j.actbio.2006.08.005 ↗
15. R. Ding, I.P. Jones, and H. Jiao: Mater. Sci. Eng. A, 2007, vol. 458, pp. 126–35.10.1016/j.msea.2006.12.040 ↗
16. S.E. Kim, J.H. Son, Y.T. Hyun, H.W. Jeong, Y.T. Lee, J.S. Song, and J.H. Lee: Met. Mater. Int., 2007, vol. 13, pp. 145–49.10.1007/BF03027565 ↗
17. A. Kawashima, S. Watanabe, K. Asami, and S. Hanada: Mater. Trans. JIM, 2003, vol. 7, pp. 1405–11.10.2320/matertrans.44.1405 ↗
18. A. Choubey, R. Balasubramaniam, and B. Basu: J. Alloys Compd., 2004, vol. 381, pp. 288–94.10.1016/j.jallcom.2004.03.096 ↗
19. H.-C. Kim, I.-J. Shon, J.-K. Yoon, and J.-M. Doh: Int. J. Refractory Met. Hard Mater., 2007, vol. 25, pp. 46–52.10.1016/j.ijrmhm.2005.11.004 ↗
20. M. Sannia, R. Orru , J.E. Garay, G. Cao, and Z.A. Munir: Mater. Sci. Eng. A, 2003, vol. 345, pp. 270–7710.1016/S0921-5093(02)00478-1 ↗
21. A. Nouri, P.D. Hodgson, and C.E. Wen: Acta Biomater., 2010, vol. 6, pp. 1630–39.10.1016/j.actbio.2009.10.005 ↗
22. N. Sakaguchi: Mater. Sci. Eng. C, 2005, vol. 25, pp. 370–7610.1016/j.msec.2005.04.003 ↗
23. A. Nouri, X. Chen, Y. Li, Y. Yamada, P.D. Hodgson, and G. Wen: Mater. Sci. Eng. A, 2008, vol. 485, pp. 562–70.10.1016/j.msea.2007.10.010 ↗
24. Y. Qiang, S. Jian, X. Hui, and G. Wen-yuan: Trans. Nonferrous Met. Soc. China, 2007, vol. 17, pp. 1417–21.
25. H.Y. Kim, S. Hashmoto, J.I. Kim, T. Inamura, H. Hosoda, and S. Miyazaki: Mater. Sci. Eng. A, 2006, vol. 417, pp. 120–28.10.1016/j.msea.2005.10.065 ↗
26. H.Y. Kim, J.I. Kim, T. Inamur, H. Hosod, and S. Miyazaki; Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 839–43.10.1016/j.msea.2006.02.136 ↗
27. L. Xu, S. Xiao, J. Tian, Y. Chen, and Y. Huang: Trans. Nonferrous Met. Soc. China, 2009, vol. 19, pp. 639–44.10.1016/S1003-6326(10)60124-0 ↗
28. A.M. Omran, K.D. Woo, D.K. Kim, S.W. Kim, M.S. Moon, N.A. Barakat, and D.L. Zhan: Met. Mater. Int., 2008, vo1. 14 (3), pp. 321–25.10.3365/met.mat.2008.06.321 ↗
29. A.N. Omran, K.D. Woo, E.P. Kwon, N.A. Barakat, H. Bom, S.W. Kim, and D. Zhang: Sci. Adv. Mater., 2009, vol. 1, pp. 205–11.10.1166/sam.2009.1045 ↗