journal article·2013-04

Understanding the Shape-Memory Behavior in Ti-(~49 At. Pct) Ni Alloy by Nanoindentation Measurement

A. Sinha, S. Datta, P. C. Chakraborti, P. P. Chattopadhyay

Publisher page

Abstract

The influence of aging treatment on the work-hardening behavior of near-equiatomic NiTi alloy has been studied at the microstructural scale by conducting the instrumented indentation measurement. The maximum shape recovery is achieved at the peak aged condition. The improvement in shape recovery has been attributed to the delayed onset of plasticity. A comparison has been made between the recoverable strain obtained from the tensile experiments and the recovery index parameter determined from the nanoindentation measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. H.C. Lin and S.K. Wu: Scripta Metall. Mater., 1992, vol. 26, pp. 59–62.10.1016/0956-716X(92)90369-P ↗
2. Y. Liu and S.P. Calvin: Acta Mater., 1997, vol. 45, pp. 4431–39.10.1016/S1359-6454(97)00144-4 ↗
3. D. Chrobak and D. Stroz: Scripta Mater., 2005, vol. 52, pp. 757–60.10.1016/j.scriptamat.2004.12.010 ↗
4. G.A. Shaw, D.S. Stone, A.D. Johnson, A.B. Ellis, and W.C. Crone: Appl. Phys. Lett., 2003, vol. 83, pp. 257–59.10.1063/1.1591235 ↗
5. A.J. Muir Wood, S. Sanjabi, Y.Q. Fu, Z.H. Barber, and T.W. Clyne: Surf. Coat. Tech., 2008, vol. 202, pp. 3115–20.10.1016/j.surfcoat.2007.11.011 ↗
6. X.-G. Ma and K. Komvopoulos: Appl. Phys. Lett., 2003, vol. 83, pp. 3773–75.10.1063/1.1623942 ↗
7. A.J. Muir Wood and T.W. Clyne: Acta Mater., 2006, vol. 54, pp. 5607–15.10.1016/j.actamat.2006.08.013 ↗
8. S. Sanjabi and Z.H. Barber: Surf. Coat. Tech., 2010, vol. 204, pp. 1299–1304.10.1016/j.surfcoat.2009.10.013 ↗
9. K. Otsuka and C.M. Wayman: Shape Memory Materials, 1st ed., Cambridge University Press, Cambridge, U.K., 1998, p. 27.
10. X. Li and B. Bhushan: Mater. Charact., 2002, vol. 48, pp. 11–36.10.1016/S1044-5803(02)00192-4 ↗
11. N.K. Mukhopadhyay and P. Paufler: Int. Mater. Rev., 2006, vol. 51, pp. 209–45.10.1179/174328006X102475 ↗
12. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
13. W.C. Oliver and G.M. Pharr: J. Mater. Res., 2004, vol. 19, pp. 3–20.10.1557/jmr.2004.19.1.3 ↗
14. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Acta Mater., 2001, vol. 49, pp. 3899–3918.10.1016/S1359-6454(01)00295-6 ↗
15. N. Chollacoop, M. Dao, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 3713–29.10.1016/S1359-6454(03)00186-1 ↗
16. J.L. Bucaille, S. Stauss, E. Felder, and J. Michler: Acta Mater., 2003, vol. 51, pp. 1663–78.10.1016/S1359-6454(02)00568-2 ↗
17. D. Ma, C.W. Ong, J. Lu, and J. He: J. Appl. Phys., 2003, vol. 94, pp. 288–94.10.1063/1.1579862 ↗
18. S. Kucharski and Z. Mro′z: Mater. Sci. Eng. A, 2001, vol. 318, pp. 65–76.10.1016/S0921-5093(01)01334-X ↗
19. B. Storåkers and P.-L. Larsson: J. Mech. Phys. Solid., 1994, vol. 42, pp. 307–32.10.1016/0022-5096(94)90012-4 ↗
20. B.N. Lucas and W.C. Oliver: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 601–10.10.1007/s11661-999-0051-7 ↗
21. M.L. Oyen and R.F. Cook: J. Mater. Res., 2003, vol. 18, pp. 139–50.10.1557/JMR.2003.0020 ↗
22. H. Takagi, M. Dao, M. Fujiwara, and M. Otsuka: Philos. Mag., 2003, vol. 83, pp. 3959–76.10.1080/14786430310001616045 ↗
23. A.C. Fischer-Cripps: Mater. Sci. Eng. A, 2004, vol. 385, pp. 74–82.10.1016/j.msea.2004.04.070 ↗
24. Y.T. Cheng and C.-M. Cheng: Appl. Phys. Lett., 1998, vol. 73, pp. 614–16.10.1063/1.121873 ↗
25. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol.64, pp. 533–38.10.1111/j.1151-2916.1981.tb10320.x ↗
26. M.T. Laugier: J. Mater. Sci. Lett., 1987, vol. 6, pp. 897-900.10.1007/BF01729862 ↗
27. R. Dukino and M.V. Swain: J. Am. Ceram. Soc., 1992, vol. 75, pp. 3299–3304.10.1111/j.1151-2916.1992.tb04425.x ↗
28. R. Liu, D.Y. Li, Y.S. Xie, R. Llewellyn, and H.M. Hawthorne: Scripta Mater., 1999, vol.41, pp. 691–96.10.1016/S1359-6462(99)00199-2 ↗
29. M. Arciniegas, Y. Giallard, J. Pena, J.M. Manero, and F.J. Gil: Intermetallics, 2009, vol. 17, pp. 784–91.10.1016/j.intermet.2009.03.020 ↗
30. W. Ni, Y.T. Cheng, and D.S. Grummon: Surf. Coat. Tech., 2004, vols. 177–178, pp. 512–17.10.1016/S0257-8972(03)00920-4 ↗
31. G.A. Shaw, J.S. Trethewey, A.D. Johnson, W.J. Drugan, and W.C. Crone: Adv. Mater., 2005, vol. 17, pp. 1123–27.10.1002/adma.200400942 ↗
32. C.P. Frick, T.W. Lang, K. Spark, and K. Gall: Acta Mater., 2006, vol. 54, pp. 2223–34.10.1016/j.actamat.2006.01.030 ↗
33. L. Qian, S. Zhang, D. Li, and Z. Zhou: J. Mater. Res., 2009, vol. 24, pp. 1082–86.10.1557/jmr.2009.0082 ↗
34. S. Rajagopalan, A.L. Little, M.A.M. Bourke, and R. Vaidyanathan: Appl. Phys. Lett., 2005, vol. 86, pp. 081901–03.10.1063/1.1863437 ↗
35. W.M. Huang, J.F. Su, M.H. Hong, and B. Yang: Scripta Mater., 2005, vol. 53, pp. 1055–57.10.1016/j.scriptamat.2005.07.005 ↗
36. D. Tabor: The Hardness of Metals, Clarendon Press, Oxford, U.K., 1951.
37. NACE International: NACE Standard TM0177-2005 Item No. 21212, Houston, TX, 1997.
38. H.F. Lopez, A. Salinas, and H. Calderon: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 717–29.10.1007/s11661-001-1007-8 ↗
39. Z. Xie, Y. Liu, and J.V. Humbeeck: Acta Mater., 1998, vol. 46, pp. 1989–2000.10.1016/S1359-6454(97)00379-0 ↗
40. B. Yang, L. Riester, and T.G. Nieh: Scripta Mater., 2006, vol. 54, pp. 1277–80.10.1016/j.scriptamat.2005.12.049 ↗
41. H. Gao and Y. Huang: Scripta Mater., 2003, vol. 48, pp. 113–18.10.1016/S1359-6462(02)00329-9 ↗
42. A. Bolshakov and G.M. Pharr: J. Mater. Res., 1998, vol. 13, pp. 1049–58.10.1557/JMR.1998.0146 ↗
43. J.Y. Kim, S.K. Kang, J.R. Greer, and D. Kwon: Acta Mater., 2008, vol. 56, pp. 3338–43.10.1016/j.actamat.2008.02.049 ↗
44. A.A. Elmustafa: Model. Simul. Mater. Sci. Eng., 2007, vol. 15, pp. 823–965.10.1088/0965-0393/15/7/008 ↗
45. W. Ni, Y.-T. Cheng, and D.S. Grummon: Surf. Coat. Technol., 2004, vols. 177–178, pp. 512–17.10.1016/S0257-8972(03)00920-4 ↗