journal article·2023-12Open access

Melt Flow-Induced Mechanical Deformation and Fracture Behaviour of Dendrites in Alloy Solidification

Luwei Yang, Neng Ren, Chinnapat Panwisawas, Jun Li, Mingxu Xia, Hongbiao Dong, Jianguo Li

Abstract

Cellular automaton-finite volume approach and finite element method are combined to study flow-induced dendritic deformation in alloy solidification. Simulation results reveal that dendrites can undergo mechanical fracture in Al–Cu alloy solidification. The root of primary dendrite is not the location of maximum stress due to secondary dendritic bridging and uneven radius of the primary dendritic trunk. Corresponding dendrite deformation and fracture mechanisms are suggested in the paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. H.K. Moffatt: Phys. Fluids A, 1991, vol. 3, pp. 1336–43.10.1063/1.858062 ↗
2. C.J. Todaro, M.A. Easton, D. Qiu, D. Zhang, M.J. Bermingham, E.W. Lui, M. Brandt, D.H. StJohn, and M. Qian: Nat. Commun., 2020, vol. 11, p. 142.10.1038/s41467-019-13874-z ↗
3. S. Wang, J. Kang, Z. Guo, T.L. Lee, X. Zhang, Q. Wang, C. Deng, and J. Mi: Acta Mater., 2019, vol. 165, pp. 388–97.10.1016/j.actamat.2018.11.053 ↗
4. T. Isensee and D. Tourret: Acta Mater., 2022, vol. 234, p. 118035.10.1016/j.actamat.2022.118035 ↗
5. E. Liotti, A. Lui, S. Kumar, Z. Guo, C. Bi, T. Connolley, and P.S. Grant: Acta Mater., 2016, vol. 121, pp. 384–95.10.1016/j.actamat.2016.09.013 ↗
6. D. Räbiger, Y. Zhang, V. Galindo, S. Franke, B. Willers, and S. Eckert: Acta Mater., 2014, vol. 79, pp. 327–38.10.1016/j.actamat.2014.07.037 ↗
7. J.C. Jie, S.P. Yue, J. Liu, D.H. StJohn, Y.B. Zhang, E.Y. Guo, T.M. Wang, and T.J. Li: Acta Mater., 2021, vol. 208, p. 116747.10.1016/j.actamat.2021.116747 ↗
8. N. Balasubramani, G. Wang, D.H. StJohn, and M.S. Dargusch: J. Mater. Sci. Technol., 2021, vol. 65, pp. 38–53.10.1016/j.jmst.2020.04.080 ↗
9. N. Ren, C. Panwisawas, J. Li, M. Xia, H. Dong, and J. Li: Acta Mater., 2021, vol. 215, p. 117043.10.1016/j.actamat.2021.117043 ↗
10. M. Rettenmayr: Int. Mater. Rev., 2013, vol. 54, pp. 1–7.10.1179/174328009X392930 ↗
11. L.K. Aagesen, A.E. Johnson, J.L. Fife, P.W. Voorhees, M.J. Miksis, S.O. Poulsen, E.M. Lauridsen, F. Marone, and M. Stampanoni: Nat. Phys., 2010, vol. 6, pp. 796–800.10.1038/nphys1737 ↗
12. T. Takaki and H. Kashima: J. Cryst. Growth, 2011, vol. 337, pp. 97–101.10.1016/j.jcrysgro.2011.10.012 ↗
13. C. Chen, J. Sun, A. Diao, Y. Yang, J. Li, and Y. Zhou: J. Alloys Compd., 2022, vol. 891, p. 161949.10.1016/j.jallcom.2021.161949 ↗
14. A.M. Mullis, D.J. Walker, S.E. Battersby, and R.F. Cochrane: Mater. Sci. Eng. A, 2001, vol. 304–306, pp. 245–49.10.1016/S0921-5093(00)01477-5 ↗
15. L.K. Aagesen, A.E. Johnson, J.L. Fife, P.W. Voorhees, M.J. Miksis, S.O. Poulsen, E.M. Lauridsen, F. Marone, and M. Stampanoni: Acta Mater., 2011, vol. 59, pp. 4922–32.10.1016/j.actamat.2011.04.036 ↗
16. H. Neumann-Heyme, K. Eckert, and C. Beckermann: Phys. Rev. E, 2015, vol. 92, p. 060401.10.1103/PhysRevE.92.060401 ↗
17. Z. Zhang, C. Wang, B. Koe, C.M. Schlepütz, S. Irvine, and J. Mi: Acta Mater., 2021, vol. 209, p. 116796.10.1016/j.actamat.2021.116796 ↗
18. F. Wang, D. Eskin, J. Mi, C. Wang, B. Koe, A. King, C. Reinhard, and T. Connolley: Acta Mater., 2017, vol. 141, pp. 142–53.10.1016/j.actamat.2017.09.010 ↗
19. B. Cai, J. Wang, A. Kao, K. Pericleous, A.B. Phillion, R.C. Atwood, and P.D. Lee: Acta Mater., 2016, vol. 117, pp. 160–69.10.1016/j.actamat.2016.07.002 ↗
20. E. Liotti, A. Lui, R. Vincent, S. Kumar, Z. Guo, T. Connolley, I.P. Dolbnya, M. Hart, L. Arnberg, R.H. Mathiesen, and P.S. Grant: Acta Mater., 2014, vol. 70, pp. 228–39.10.1016/j.actamat.2014.02.024 ↗
21. N. D’Souza, M. Newell, K. Devendra, P.A. Jennings, M.G. Ardakani, and B.A. Shollock: Mater. Sci. Eng. A, 2005, vol. 413–14, pp. 567–70.10.1016/j.msea.2005.08.188 ↗
22. R.D. Doherty: Scr. Mater., 2003, vol. 49, pp. 1219–22.10.1016/j.scriptamat.2003.08.019 ↗
23. J. Pilling and A. Hellawell: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 229–32.10.1007/BF02647763 ↗
24. K. Dragnevski, A.M. Mullis, D.J. Walker, and R.F. Cochrane: Acta Mater., 2002, vol. 50, pp. 3743–55.10.1016/S1359-6454(02)00186-6 ↗
25. F. Sheykh-jaberi, S.L. Cockcroft, D.M. Maijer, and A.B. Phillion: J. Mater. Process. Technol., 2019, vol. 266, pp. 37–45.10.1016/j.jmatprotec.2018.10.029 ↗
26. B. Billia, N. Bergeon, H.N. Thi, H. Jamgotchian, J. Gastaldi, and G. Grange: Phys. Rev. Lett., 2004, vol. 93, p. 126105.10.1103/PhysRevLett.93.126105 ↗
27. N. Ren, J. Li, N. Bogdan, M. Xia, and J. Li: Comput. Mater. Sci., 2020, vol. 180, p. 109714.10.1016/j.commatsci.2020.109714 ↗
28. K. Sugiyama, S. Ii, S. Takeuchi, S. Takagi, and Y. Matsumoto: J. Comput. Phys., 2011, vol. 230, pp. 596–627.10.1016/j.jcp.2010.09.032 ↗
29. T. Belytschko, W.K. Liu, and B. Moran: Nonlinear Finite Elements for Continua and Structures, 1st ed. Wiley, Hoboken, 2000.
30. O.C. Zienkiewicz, R.L. Taylor, and J.Z. Zhu: The Finite Element Method: Its Basis and Fundamentals, Butterworth-Heinemann, Oxford, 2013.
31. E. Oñate: Structural Analysis with the Finite Element Method: Basis and Solids, vol. 1, Springer, Dordrecht, 2013.
32. L. Yang, N. Ren, J. Li, M. Xia, H. Dong, and J. Li: IOP Conf. Ser.: Mater. Sci. Eng., 2023, vol. 1281, p. 012038.10.1088/1757-899X/1281/1/012038 ↗
33. L. Yang, N. Ren, C. Panwisawas, J. Li, M. Xia, H. Dong, and J. Li: J. Mater. Res. Technol., 2023, vol. 25, pp. 4094–109.10.1016/j.jmrt.2023.06.222 ↗
34. D. Fuloria, P.D. Lee, and D. Bernard: Mater. Sci. Eng. A, 2008, vol. 494, pp. 3–9.10.1016/j.msea.2007.10.093 ↗
35. M. Sistaninia, S. Terzi, A.B. Phillion, J.M. Drezet, and M. Rappaz: Acta Mater., 2013, vol. 61, pp. 3831–41.10.1016/j.actamat.2013.03.021 ↗
36. F. Ren, H. Ge, D. Cai, J. Li, Q. Hu, M. Xia, and J. Li: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 6243–54.10.1007/s11661-018-4892-9 ↗
37. C. Ma, R. Zhang, Z. Li, X. Jiang, Y. Wang, C. Zhang, H. Yin, and X. Qu: Comput. Mater. Sci., 2022, vol. 215, p. 111815.10.1016/j.commatsci.2022.111815 ↗
38. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.
39. W. Xu, F. Wang, D. Ma, X. Zhu, D. Li, and A. Bührig-Polaczek: Mater. Des., 2020, vol. 196, p. 109138.10.1016/j.matdes.2020.109138 ↗
40. L. Abou-Khalil, K.S. da Cruz, G. Reinhart, N. Mangelinck-Noël, and H. Nguyen-Thi: Acta Mater., 2022, vol. 241, p. 118370.10.1016/j.actamat.2022.118370 ↗
41. G. Reinhart, A. Buffet, H. Nguyen-Thi, B. Billia, H. Jung, N. Mangelinck-Noël, N. Bergeon, T. Schenk, J. Härtwig, and J. Baruchel: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 865–74.10.1007/s11661-007-9449-2 ↗
42. G. Reinhart, H. Nguyen-Thi, N. Mangelinck-Noël, J. Baruchel, and B. Billia: JOM, 2014, vol. 66, pp. 1408–14.10.1007/s11837-014-1030-z ↗
43. J.W. Aveson, G. Reinhart, C.J.L. Goddard, H. Nguyen-Thi, N. Mangelinck-Noël, A. Tandjaoui, J.R. Davenport, N. Warnken, F. di Gioacchino, T.A. Lafford, N. D’Souza, B. Billia, and H.J. Stone: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5234–41.10.1007/s11661-019-05429-0 ↗
44. P. Hallensleben, F. Scholz, P. Thome, H. Schaar, I. Steinbach, G. Eggeler, and J. Frenzel: Crystals, 2019, vol. 9, p. 149.10.3390/cryst9030149 ↗
45. J. Aveson, G. Reinhart, H. Nguyen-Thi, N. Mangelinck-Noël, A. Tandjaoui, B. Billia, K. Goodwin, T. Lafford, J. Baruchel, H. Stone, and N. D’Souza: in Superalloys 2012 (Twelfth International Symposium), 2012, pp. 615–24.10.1002/9781118516430.ch69 ↗
46. J.H. Jeong, N. Goldenfeld, and J.A. Dantzig: Phys. Rev. E, 2001, vol. 64, p. 041602.10.1103/PhysRevE.64.041602 ↗
47. M. Eshraghi, M. Hashemi, B. Jelinek, and S. Felicelli: Metals, 2017, vol. 7, p. 474.10.3390/met7110474 ↗
48. A. Zhang, S. Meng, Z. Guo, J. Du, Q. Wang, and S. Xiong: Metall. Mater. Trans. B, 2019, vol. 50B, pp. 1514–26.10.1007/s11663-019-01549-5 ↗
49. L. Qin, Z. Zhang, B. Guo, W. Li, and J. Mi: Acta Metall. Sin. (Engl. Lett.), 2023, vol. 36, pp. 857–64.10.1007/s40195-023-01531-w ↗