Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn(35−x)–x (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying and Selective Laser Melting
Source abstract
Abstract
A tri-metallic combination of FeMn35−xx at. pct (Cu, W, and Co, x = 0 and 3) biodegradable alloys was successfully synthesized by mechanical alloying (5 h) and consolidated by selective laser melting (SLM). SLM is an additive manufacturing process through which complex products can be fabricated for applications in several sectors including biomedical. The synthesized powders and consolidated samples were characterized using XRD, optical microscope, and FEG-SEM equipped with EBSD technique. Detailed microstructural evolution, mechanical, and corrosion behaviors were investigated in this study. The XRD results of the synthesized powders confirmed the formation of the designed alloys without the formation of intermetallic compounds; austenite and ferrite phases were observed in the SLM-processed samples. SLM-processed samples were produced with more than 88.8 pct of theoretical density indicating the soundness. The FeMn32W3 biodegradable alloy exhibited the highest compressive yield strength of approximately 747 ± 1 MPa which was 1.4 times higher than FeMn32Cu3 alloy. Corrosion tests showed that the corrosion rate of FeMn containing W and Co alloys was much lower than that of the pure FeMn35 alloy owing to the lower content of these elements resulting in increased standard potential of Fe–Mn elements and decreased corrosion rate.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. H. Hermawan: Prog. Biomater., 2018, vol. 7, pp. 93–110.10.1007/s40204-018-0091-4 ↗
2. J. Hufenbach, H. Wendrock, F. Kochta, U. Kühn, and A. Gebert: Mater. Lett., 2017, vol. 186, pp. 330–33.10.1016/j.matlet.2016.10.037 ↗
3. A. Drynda, T. Hassel, F.W. Bach, and M. Peuster: J. Biomed. Mater. Res. Part B Appl. Biomater., 2015, vol. 103, pp. 649–60.10.1002/jbm.b.33234 ↗
4. T. Huang, J. Cheng, and Y.F. Zheng: Mater. Sci. Eng. C., 2014, vol. 35, pp. 43–53.10.1016/j.msec.2013.10.023 ↗
5. K. Cysewska, L.F. Macía, P. Jasiński, and A. Hubin: Electrochim. Acta., 2017, vol. 245, pp. 327–36.10.1016/j.electacta.2017.05.172 ↗
6. H. Hermawan, D. Dubé, and D. Mantovani: J. Biomed. Mater. Res. Part A An Off. J. Soc. Biomater. Jpn. Soc. Biomater. Aust. Soc. Biomater. Korean Soc. Biomater., 2010, vol. 93, pp. 1–1.
7. M. Peuster, C. Hesse, T. Schloo, C. Fink, P. Beerbaum, and C. von Schnakenburg: Biomaterials, 2006, vol. 27, pp. 4955–962.10.1016/j.biomaterials.2006.05.029 ↗
8. R.-Y. Liu, R.-G. He, L.-Q. Xu, and S.-F. Guo: Acta Metall. Sin. English Lett., 2018, vol. 31, pp. 584–90.10.1007/s40195-018-0702-z ↗
9. K. Renard, S. Ryelandt, and P.J. Jacques: Mater. Sci. Eng. A., 2010, vol. 527, pp. 2969–977.10.1016/j.msea.2010.01.037 ↗
10. M. Schinhammer, P. Steiger, F. Moszner, J.F. Löffler, and P.J. Uggowitzer: Mater. Sci. Eng. C., 2013, vol. 33, pp. 1882–893.10.1016/j.msec.2012.10.013 ↗
11. P.S. Bagha, M. Khakbiz, S. Sheibani, and H. Hermawan: J. Alloys Compd., 2018, vol. 767, pp. 955–65.10.1016/j.jallcom.2018.07.206 ↗
12. P. Sotoudehbagha, S. Sheibani, M. Khakbiz, S. Ebrahimi-Barough, and H. Hermawan: Mater. Sci. Eng. C., 2018, vol. 88, pp. 88–94.10.1016/j.msec.2018.03.005 ↗
13. P.S. Bagha, M. Khakbiz, N. Safaie, S. Sheibani, and S. Ebrahimi-Barough: J. Alloys Compd., 2018, vol. 768, pp. 166–75.10.1016/j.jallcom.2018.07.261 ↗
14. M. Sikora-Jasinska, P. Chevallier, S. Turgeon, C. Paternoster, E. Mostaed, M. Vedani, and D. Mantovani: Mater. Chem. Phys., 2019, vol. 223, pp. 771–78.10.1016/j.matchemphys.2018.11.068 ↗
15. N. Safaie, M. Khakbiz, S. Sheibani, and P.S. Bagha: Procedia Mater. Sci., 2015, vol. 11, pp. 381–85.10.1016/j.mspro.2015.11.134 ↗
16. S. Mandal, R. Ummadi, M. Bose, V.K. Balla, and M. Roy: Mater. Lett., 2019, vol. 237, pp. 323–27.10.1016/j.matlet.2018.11.117 ↗
17. E. Mouzou, C. Paternoster, R. Tolouei, A. Purnama, P. Chevallier, D. Dubé, F. Prima, and D. Mantovani: Mater. Sci. Eng. C., 2016, vol. 61, pp. 564–73.10.1016/j.msec.2015.12.092 ↗
18. P. Wang, J. Eckert, K.G. Prashanth, M.W. Wu, I. Kaban, L.X. Xi, and S. Scudino: Trans. Nonferrous Met. Soc. China., 2020, vol. 30, pp. 2001–34.10.1016/S1003-6326(20)65357-2 ↗
19. T. Yang, T. Liu, W. Liao, E. MacDonald, H. Wei, X. Chen, and L. Jiang: J. Mater. Process. Technol., 2019, vol. 266, pp. 26–36.10.1016/j.jmatprotec.2018.10.015 ↗
20. R. Kumar, M. Kumar, and J.S. Chohan: J. Manuf. Process., 2021, vol. 64, pp. 828–50.10.1016/j.jmapro.2021.02.022 ↗
21. H. Zhang, D. Gu, C. Ma, M. Guo, J. Yang, H. Zhang, H. Chen, C. Li, K. Svynarenko, and K. Kosiba: Mater. Sci. Eng. A., 2021, vol. 802, 140431.10.1016/j.msea.2020.140431 ↗
22. P. Bajaj, A. Hariharan, A. Kini, P. Kürnsteiner, D. Raabe, and E.A. Jägle: Mater. Sci. Eng. A., 2020, vol. 772, 138633.10.1016/j.msea.2019.138633 ↗
23. H. Li, Y. Zheng, and L. Qin: Prog. Nat. Sci. Mater. Int., 2014, vol. 24, pp. 414–22.10.1016/j.pnsc.2014.08.014 ↗
24. J.C. Najmon, S. Raeisi, A. Tovar: Addit. Manuf. Aerosp. Ind., 2019, pp. 7–31.10.1016/B978-0-12-814062-8.00002-9 ↗
25. M. Schinhammer, A.C. Hänzi, J.F. Löffler, and P.J. Uggowitzer: Acta Biomater., 2010, vol. 6, pp. 1705–13.10.1016/j.actbio.2009.07.039 ↗
26. D. Carluccio, A.G. Demir, L. Caprio, B. Previtali, M.J. Bermingham, and M.S. Dargusch: J. Manuf. Process., 2019, vol. 40, pp. 113–21.10.1016/j.jmapro.2019.03.018 ↗
27. 71260ed17c39238bb4808f3b102b834ef5058d1b @ material-properties.org, (n.d.). https://material-properties.org/Tungsten-thermal-properties-melting-point-thermal-conductivity-expansion/.
28. H.R. Ammar, S. Sivasankaran, and A.S. Alaboodi: Materials (Basel), 2021, vol. 14, p. 3088.10.3390/ma14113088 ↗
29. Z. Sun, X. Tan, S.B. Tor, and C.K. Chua: NPG Asia Mater., 2018, vol. 10, pp. 127–36.10.1038/s41427-018-0018-5 ↗
30. G. Telasang, S. Narayanaswamy, D.M. Santhoshsarang, and R. Bathe: J. Manuf. Process., 2022, vol. 80, pp. 920–29.10.1016/j.jmapro.2022.06.055 ↗
31. N.T. Aboulkhair, I. Maskery, C. Tuck, I. Ashcroft, and N.M. Everitt: J. Mater. Process. Technol., 2016, vol. 230, pp. 88–98.10.1016/j.jmatprotec.2015.11.016 ↗
32. L. Zhang, H. Zhu, J. Liu, X. Zeng: Rapid Prototyp. J., 2018.
33. Z. Fan, M. Lu, and H. Huang: Ceram. Int., 2018, vol. 44, pp. 9484–493.10.1016/j.ceramint.2018.02.166 ↗
34. C. Wang, Y. Hu, C. Zhong, C. Lan, W. Li, X. Wang: Mater. Sci. Eng. A., 2022, pp. 143276.10.1016/j.msea.2022.143276 ↗
35. A.G. Demir, L. Monguzzi, and B. Previtali: Addit. Manuf., 2017, vol. 15, pp. 20–28.
36. R. Li, P. Niu, T. Yuan, P. Cao, C. Chen, and K. Zhou: J. Alloys Compd., 2018, vol. 746, pp. 125–34.10.1016/j.jallcom.2018.02.298 ↗
37. M. Li, L. Wang, H. Yang, S. Zhang, X. Lin, and W. Huang: Mater. Sci. Eng. A., 2022, vol. 854, 143813.10.1016/j.msea.2022.143813 ↗
38. K.V. Yang, Y. Shi, F. Palm, X. Wu, and P. Rometsch: Scr. Mater., 2018, vol. 145, pp. 113–17.10.1016/j.scriptamat.2017.10.021 ↗
39. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina: Acta Mater., 2012, vol. 60, pp. 2229–239.10.1016/j.actamat.2011.12.032 ↗
40. B. Song, S. Dong, P. Coddet, H. Liao, and C. Coddet: Mater. Des., 2014, vol. 53, pp. 1–7.10.1016/j.matdes.2013.07.010 ↗
41. Y.-K. Kim, J. Choe, and K.-A. Lee: J. Alloys Compd., 2019, vol. 805, pp. 680–91.10.1016/j.jallcom.2019.07.106 ↗
42. S. Zhang, X. Lin, L. Wang, X. Yu, Y. Hu, H. Yang, L. Lei, and W. Huang: Mater. Sci. Eng. A., 2021, vol. 812, 141145.10.1016/j.msea.2021.141145 ↗
43. R. Ummethala, P.S. Karamched, S. Rathinavelu, N. Singh, A. Aggarwal, K. Sun, E. Ivanov, L. Kollo, I. Okulov, and J. Eckert: Materialia., 2020, vol. 14, 100941.10.1016/j.mtla.2020.100941 ↗
44. R. Muñoz-Moreno, V.D. Divya, S.L. Driver, O. Messé, T. Illston, S. Baker, M.A. Carpenter, and H.J. Stone: Mater. Sci. Eng. A., 2016, vol. 674, pp. 529–39.10.1016/j.msea.2016.06.075 ↗
45. V.D. Divya, R. Muñoz-Moreno, O. Messé, J.S. Barnard, S. Baker, T. Illston, and H.J. Stone: Mater. Charact., 2016, vol. 114, pp. 62–74.10.1016/j.matchar.2016.02.004 ↗
46. S.M. Huang, E.A. Nauman, and L.A. Stanciu: Mater. Sci. Eng. C., 2019, vol. 99, pp. 1048–057.10.1016/j.msec.2019.02.055 ↗
47. W. Lin, L. Qin, H. Qi, D. Zhang, G. Zhang, R. Gao, H. Qiu, Y. Xia, P. Cao, and X. Wang: Acta Biomater., 2017, vol. 54, pp. 454–68.10.1016/j.actbio.2017.03.020 ↗
48. T. Kraus, F. Moszner, S. Fischerauer, M. Fiedler, E. Martinelli, J. Eichler, F. Witte, E. Willbold, M. Schinhammer, and M. Meischel: Acta Biomater., 2014, vol. 10, pp. 3346–353.10.1016/j.actbio.2014.04.007 ↗
49. S. Mandal, S.K. Nandi, and M. Roy: J. Mater. Chem. B., 2021, vol. 9(21), pp. 4340–54.10.1039/D1TB00641J ↗
50. B. Liu and Y.F. Zheng: Acta Biomater., 2011, vol. 7, pp. 1407–20.10.1016/j.actbio.2010.11.001 ↗
51. J. Cheng and Y. Zheng: J. Biomed. Mater. Res. Part B Appl. Biomater., 2013, vol. 101, pp. 485–97.10.1002/jbm.b.32783 ↗
52. S. Mandal, V. Kishore, M. Bose, S.K. Nandi, and M. Roy: J. Mater. Sci. Technol., 2021, vol. 84, pp. 159–72.10.1016/j.jmst.2020.12.029 ↗
53. D. Hong, D.-T. Chou, O.I. Velikokhatnyi, A. Roy, B. Lee, I. Swink, I. Issaev, H.A. Kuhn, and P.N. Kumta: Acta Biomater., 2016, vol. 45, pp. 375–86.10.1016/j.actbio.2016.08.032 ↗
54. D.-T. Chou, D. Wells, D. Hong, B. Lee, H. Kuhn, and P.N. Kumta: Acta Biomater., 2013, vol. 9, pp. 8593–8603.10.1016/j.actbio.2013.04.016 ↗
55. Ye. Zhang, S. Li, D. Li, Y. Li, H. He, and C. Shu: Metals, 2022, vol. 12, p. 884.10.3390/met12050884 ↗