Appraising Forgeability and Surface Cracking in New Generation Cast and Wrought Superalloys
Source abstract
Abstract
Abstract Surface cracking poses a major problem in industrial forging, but the scientific understanding of the phenomenon is hampered by the difficulty of replicating it in a laboratory setting. In this work, a novel laboratory-scale experimental method is presented to investigate forgeability in new generation cast and wrought superalloys. This new approach makes possible appraising the prevalence and severity of surface cracking by mimicking the die chilling effects characteristic of hot die forging. Two highγ′-reinforced alloys are used to explore this methodology. A Gleeble thermo-mechanical simulator is used to conduct hot compression tests following a non-isothermal cycle, with the aim to simulate the cooling of the near-surface regions during the forging process. FEA simulations, sample geometry design, and heat-treatments are used to ensure the correspondence between laboratory and real-scale forging. A wide range of surface cracking results are obtained for different forging temperatures and cooling rates—proving the soundness of the method. Surprisingly, samples heated up to higher initial temperatures typically show more extensive surface cracking. These findings indicate that—along with the local mechanical conditions of the forging—die-chilling effects and forging temperatures are paramount in controlling surface cracking, as they dictate the key variables governing the distribution and kinetics ofγ′ formation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2008.
2. M.J. Donachie and S.J. Donachie: Selection of Superalloys for Design, Wiley, Hoboken, 2002.10.1002/9780470172551.ch10 ↗
3. R.M.F. Jones and L.A. Jackman: JOM, 1999, https://doi.org/10.1007/s11837-999-0007-9.10.1007/s11837-999-0007-9 ↗
4. H. Monajati, M. Jahazi, R. Bahrami, and S. Yue: Mater. Sci. Eng. A, 2004, vol. 373, pp. 286–93.10.1016/j.msea.2004.01.027 ↗
5. C.P. Blankenship, M.F.F. Henry, J.M. Hyzak, R.B. Rohling, E.L. Hall, C.P. Blankenship Jr., M.F.F. Henry, J.M. Hyzak, R.B. Rohling, and E.L. Hall: Superalloys, 1996, vol. 1996, pp. 653–62.
6. J. Chen, P. Zhang, J. Dong, M. Zhang, and Z. Yao: Mater. Trans., 2015, vol. 56, pp. 1968–76.10.2320/matertrans.M2015283 ↗
7. T. Ohno, R. Watanabe, T. Fukui, and K. Tanaka: Trans. Iron Steel Inst. Jpn., 1988, vol. 28, p. 958. https://doi.org/10.2355/isijinternational1966.28.958.10.2355/isijinternational1966.28.958 ↗
8. US6,908,519B2: 2005.
9. T. Altan, G. Ngaile, and G. Shen: AMS Int., 2005, vol. 1, p. 1.
10. M.C. Hardy, M. Detrois, E.T. McDevitt, C. Argyrakis, V. Saraf, P.D. Jablonski, J.A. Hawk, R.C. Buckingham, H.S. Kitaguchi, and S. Tin: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, vol. 51, p. 2626. https://doi.org/10.1007/s11661-020-05773-6.10.1007/s11661-020-05773-6 ↗
11. A. Devaux, B. Picqué, M.F. Gervais, E. Georges, T. Poulain, and P. Héritier: Superalloys 2012, Springer, New York, 2012.
12. F.E. Sczerzenie and G.E. Maurer, 2012, pp. 573–80.
13. A. Devaux, E. Georges, and P. Héritier: Adv. Mater. Res., 2011.
14. J.A. Heaney, M.L. Lasonde, A.M. Powell, B.J. Bond, and C.M. O’Brien, in 8th Int. Symp. Superalloy 718 Deriv. 2014, 2014, pp. 67–77.10.1002/9781119016854.ch6 ↗
15. J.F. Radavich: 2012, pp. 229–40.
16. C.Y. Lin, H.Y. Bor, C.N. Wei, and C.H. Liao: in Materials Science Forum, vol. 941, Trans Tech Publ, 2018, pp. 2167–72.10.4028/www.scientific.net/MSF.941.2167 ↗
17. A. Kracke, 2016, pp. 13–50.10.15358/1613-0669-2016-4-50 ↗
18. S.B. Kim, A. Evans, J. Shackleton, G. Bruno, M. Preuss, and P.J. Withers: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2005, vol. 36, pp. 3041–53.10.1007/s11661-005-0076-5 ↗
19. H. Monajati, M. Jahazi, S. Yue, and A.K. Taheri: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2005, vol. 36, p. 895. https://doi.org/10.1007/s11661-005-0284-z.10.1007/s11661-005-0284-z ↗
20. H. Hattori, M. Takekawa, D. Furrer, and R.J. Noel, 2012, pp. 705–11.
21. M. Goto and D.M. Knowles: Eng. Fract. Mech., 1998, vol. 60, pp. 1–8.10.1016/S0013-7944(98)00003-4 ↗
22. J. Rösler, T. Hentrich, and B. Gehrmann: Metals (Basel), 2019, vol. 9, pp. 1–20.10.3390/met9101130 ↗
23. J. Sharma, M.H. Haghighat, B. Gehrmann, C. Moussa, and N. Bozzolo: Superalloys 2020, Springer, New York, 2020, pp. 450–60.10.1007/978-3-030-51834-9_44 ↗
24. T. Fedorova, J. Rösler, J. Klöwer, and B. Gehrmann: MATEC Web Conf. https://doi.org/10.1051/matecconf/20141401003.10.1051/matecconf/20141401003 ↗
25. Allegheny Technologies Incorporated (ATI): ATI 720 Alloy Technical Data Sheet. Pittsburgh. 2014.
26. J.M. Hyzak, R.P. Singh, J.E. Morra, and T.E. Howson: in Superalloys 1992, ed. by S. Antolovich, R. Stusrud, R. MacKay, D. Anton, T. Khan, R. Kissinger, and D.L. Klarstrom (TMS, The Minerals, Metals &Materials Society, 1992), pp. 93–101.10.7449/1992/Superalloys_1992_93_101 ↗
27. Z. Wan, L. Hu, Y. Sun, T. Wang, and Z. Li: J. Alloys Compds., 2016, https://doi.org/10.1016/j.jallcom.2018.08.010.10.1016/j.jallcom.2018.08.010 ↗
28. J.G. Wang, D. Liu, T. Wang, and Y.H. Yang: Adv. Mater. Res., 2014, vol. 887, p. 15.
29. F. Liu, J. Chen, J. Dong, M. Zhang, and Z. Yao: Mater. Sci. Eng. A, 2016, vol. 651, pp. 102–15.10.1016/j.msea.2015.10.099 ↗
30. Q.Y. Yu, Z.H. Yao, and J.X. Dong: Mater. Charact., 2015, vol. 107, pp. 398–410.10.1016/j.matchar.2015.07.035 ↗
31. G. He, F. Liu, L. Huang, and L. Jiang: Adv. Eng. Mater., 2016, vol. 18, pp. 1823–32.10.1002/adem.201600270 ↗
32. Z. Jia, Z.X. Gao, J.J. Ji, D.X. Liu, T.B. Guo, and Y.T. Ding: Rare Met., 2021, vol. 40, pp. 2083–91.10.1007/s12598-020-01474-6 ↗
33. H. Zhang, K. Zhang, Z. Lu, C. Zhao, and X. Yang: Mater. Sci. Eng. A, 2014, vol. 604, pp. 1–8.10.1016/j.msea.2014.03.015 ↗
34. G. He, F. Liu, J. Si, C. Yang, and L. Jiang: Mater. Des., 2015, vol. 87, pp. 256–65.10.1016/j.matdes.2015.08.035 ↗
35. Y. Kong, P. Chang, Q. Li, L. Xie, and S. Zhu: J. Alloys Compds., 2015, vol. 622, pp. 738–44.10.1016/j.jallcom.2014.10.118 ↗
36. Y. Ning, Z. Yao, H. Guo, M.W. Fu, H. Li, and X. Xie: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6794–99.10.1016/j.msea.2010.07.040 ↗
37. S.L. Semiatin, D.W. Mahaffey, N.C. Levkulich, O.N. Senkov, and J.S. Tiley: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2018, https://doi.org/10.1007/s11661-018-4896-5.10.1007/s11661-018-4896-5 ↗
38. M. Fahrmann, and A. Suzuki: in Proceedings of the International Symposium on Superalloys, 2008.
39. K.R. Bain, M.L. Gambone, J.M. Hyzak, and M.C. Thomas: Superalloys, 1988, vol. 1988, pp. 13–22.
40. K. Gopinath, A.K. Gogia, S.V. Kamat, R. Balamuralikrishnan, and U. Ramamurty: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2008, vol. 39, pp. 2340–50.10.1007/s11661-008-9585-3 ↗
41. C. Solís, J. Munke, M. Bergner, A. Kriele, M.J. Mühlbauer, D.V. Cheptiakov, B. Gehrmann, J. Rösler, and R. Gilles: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2018, vol. 49, pp. 4373–81.10.1007/s11661-018-4761-6 ↗
42. M. Bergner, J. Rösler, B. Gehrmann, and J. Klöwer: in Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, Springer. 2018, pp. 489–99.10.1007/978-3-319-89480-5_31 ↗
43. A. Baytaroglu: Chalmers University of Technology, 2022.
44. H. Bian, X. Xu, Y. Li, Y. Koizumi, Z. Wang, M. Chen, K. Yamanaka, and A. Chiba: NPG Asia Mater., 2015, vol. 7, p. 212.10.1038/am.2015.96 ↗
45. A. Baldan: Review Progress in Ostwald Ripening Theories and Their Applications to the γ-Precipitates in Nickel-Base Superalloys Part II Nickel-Base Superalloys .
46. R.L. Kennedy: Proc. Int. Symp. Superalloys Var. Deriv., 2005. pp. 1–14.10.7449/2005/Superalloys_2005_1_14 ↗