Decarburization Kinetics of Fe–C Alloy Strip in Ar–CO2–CO Atmosphere
Source abstract
Abstract
To improve the decarburization effect of Fe–C alloy strips in an Ar–CO2–CO atmosphere, the rate-limiting links of the decarburization process and its conversion as well as the effect of temperature on the decarburization rate, were analyzed. Based on each individual mechanism, three possible rate-limiting links for the decarburization of Fe–C alloy strips (surface decarburization, carbon diffusion, and the decomposition of the carbon-rich phase) were analyzed. The rate expressions of the three limiting links are ({C}t={C}0-{k}_{mathrm{r}}t); ({C}t={C}0-{k}_{mathrm{D}}{t}^frac{1}{2}+{k}_{mathrm{D}}^{prime}t) or ({C}t={C}0{mathrm{e}}-kt;) ({C}t={C}0-{k}_{mathrm{c}}t+{k}_{mathrm{c}}^{prime}{t}2). The mechanism models are used for the simulation of the decarburization kinetics of 1 to 2 mm Fe–4.2 wt pct C strips. The results showed that the decarburization process is not a single rate-limiting links process. The restrictive links of each stage of the decarburization process of Fe–4.2 wt pct C alloy strips in an Ar–CO2–CO atmosphere were fitted in stages. The key limiting links of the decarburization process of Fe–C alloys with high-carbon domains at different temperatures are surface decarburization in the early stage and the dissolution of the carbon-rich phase in the middle and later stages. The model expression for the simulation of the entire decarburization process was: ({[mathrm{pct} mathrm{C}]}t={[pct mathrm{C}]}0-eta t+xi {t}2).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Cultural Artifacts
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Y.W. Chao, T.S. Lui, and F.T. Shiao: AFS Trans., 1994, vol. 102, pp. 199–204.
2. J.M. Song, T.S. Lui, and L.H. Chen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1263–73.10.1007/s11661-002-0227-x ↗
3. J.Y. Park, K.T. Choi, J.A. Szpunar, K.H. Oh, and H.Y. Rac: Scripta Mater., 2002, vol. 46, pp. 199–203.10.1016/S1359-6462(01)01220-9 ↗
4. M.C. Donald: Ironmak. Steelmak., 2012, vol. 39, pp. 487–89.10.1179/0301923312Z.000000000138 ↗
5. W.H. Lee, J.O. Park, and J.S. Lee: Ironmak. Steelmak., 2012, vol. 39, pp. 530–34.10.1179/1743281212Y.0000000032 ↗
6. R. Mahapatra, W. Blejde, G. Gillen, P. Campbell, and R. Wechsler: SCANMET II Proceedings, Luleå, 2004, pp. 161–72.
7. K. Nagasaki and N. Komuro: Tetsu-to-Hagane, 1963, vol. 49, pp. 982–88.10.2355/tetsutohagane1955.49.7_982 ↗
8. J.D. Verhoevev: Mater. Charact., 1990, vol. 25, pp. 221–39.10.1016/1044-5803(90)90012-9 ↗
9. Moiseev: Thermodynamic Activity of Carbon in Recarburizing, vol. 1, Central Scientific-Research Institute of Metallurgy, 1974, pp. 21–26.10.1007/BF00679196 ↗
10. J. Agren: Acta Metall., 1982, vol. 30, pp. 841–51.10.1016/0001-6160(82)90082-7 ↗
11. J. Agren: Scripta Metall., 1986, vol. 20, pp. 1507–09.10.1016/0036-9748(86)90384-4 ↗
12. R.P. Smith: Trans. Metall. Soc. AIME, 1962, vol. 24, pp. 105–11.
13. T.A. Larssen and D. Senk: Metall. Mater. Trans. B, 2021, vol. 52B, pp. 1073–5615.
14. J. Hao, J. Chen, and P. Han: Steel Res. Int., 2014, vol. 85, pp. 461–65.10.1002/srin.201300102 ↗
15. E. Sharif-Sanavi and M. Mirjalili: ISIJ Int., 2018, vol. 58, pp. 1791–1800.10.2355/isijinternational.ISIJINT-2018-250 ↗
16. J. Burke, J. Bell, and D. Bourne: Acta Metall., 1960, vol. 8, pp. 864–70.10.1016/0001-6160(60)90153-X ↗
17. C. Rong, A. Liqun, and H. Lukuo: Iron Steel, 2020, vol. 117, pp. 103–10.
18. S. Caijiao, A. Liqun, and H. Lukuo: Ironmak. Steelmak., 2020, vol. 47, pp. 1015–21.10.1080/03019233.2019.1659657 ↗
19. H. Lukuo, C. Rong, and A. Liqun: Trans. Indian Inst. Met., 2019, vol. 72, pp. 335–42.10.1007/s12666-018-1484-8 ↗
20. L. Qiang, A. Liqun, and L. Yaqiang: Cast. Technol., 2017, vol. 38, pp. 1650–53.
21. Z. Meijie, H. Lukuo, and A. Liqun: Steel Vanadium Titan., 2020, vol. 41, pp. 100–04 + 12.
22. Z. Meijie, A. Liqun, and H. Lukuo: Iron Steel, 2021, vol. 56, pp. 49–55.
23. H. Yaobin, A. Liqun, and H. Lukuo: Iron Steel, 2020, vol. 55, pp. 133–39.
24. A. Liqun, H. Yaobin, and H. Lukuo: J. Eng. Sci., 2021, vol. 43, pp. 816–24.
25. Z. Meijie, A. Liqun, and H. Lukuo: Metall. Res. Technol., 2022, vol. 119, p. 108.10.1051/metal/2021092 ↗
26. L. Zongchang, W. Zhenguo, W. Yufeng, Z. Wenfang, and C. Long: J. Baotou Iron Steel Inst., 2002, vol. 21, pp. 151–53.10.1016/S1006-706X(14)60024-8 ↗