Ab Initio Investigation of Planar Defects in Immm-Ni2(Cr,Mo,W) Strengthened HAYNES 244 Alloy
Source abstract
Abstract
The Immm-Ni2(Cr,Mo,W) body centered orthorhombic (BCO) intermetallic phase, denoted as γ′″, is the primary strengthening phase in commercial Ni-base HAYNES® 242® and 244® alloys. Due to the relatively low symmetry and six crystallographic variants precipitating in the face-centered cubic solid solution γ matrix, the deformation mechanisms are expected to be complex, and a myriad of planar defects are predicted to be observed on the close-packed {013} and {110} planes, which are nearly co-planar to the matrix {111} plane. We find that these defects include those analogous to the γ′-Ni3Al phase: superlattice intrinsic stacking faults, antiphase boundaries, and complex stacking faults. We determined these planar defect energies and generalized stacking fault energy surfaces utilizing ab initio density functional theory calculations. The γ′″ {013} and {110} planes exhibited comparable planar defect energies but showed drastically different dislocation shear pathways due to the lower symmetry of the orthorhombic phase. We observed that the addition of W increased the fault energies significantly, which could correspond to the observed increase in yield strength of 244 alloy over that of 242 alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. R.C. Reed: The Superalloys Fundamentals and Applications, 2006.10.1017/CBO9780511541285 ↗
2. T.M. Pollock and S. Tin: J. Propul. Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
3. R.E. Schafrik and R. Sprague: Advanced Materials and Processes.
4. R.C. Reed and R.C. Reed: The Physical Metallurgy of Nickel and Its Alloys, 2009.
5. M.G. Fahrmann, S.K. Srivastava, and L.M. Pike: MATEC Web of Conferences, https://doi.org/10.1051/matecconf/20141417004.10.1051/matecconf/20141417004 ↗
6. P.E.A. Turchi, L. Kaufman, and Z.K. Liu: Calphad, 2006, vol. 30, pp. 70–87.10.1016/j.calphad.2005.10.003 ↗
7. Y. Mishin: Acta Mater., 2004, vol. 52, pp. 1451–67.10.1016/j.actamat.2003.11.026 ↗
8. D.C. Lv, D. McAllister, M.J. Mills, and Y. Wang: Acta Mater., 2016, vol. 118, pp. 350–61.10.1016/j.actamat.2016.07.055 ↗
9. L. Feng, D. Mcallister, C.H. Zenk, M.J. Mills, and Y. Wang: Deformation Mechanisms of γ ′ and γ ” Co -Precipitates in IN718, Springer International Publishing, 2020.10.1007/978-3-030-51834-9_65 ↗
10. L. Kovarik, R.R. Unocic, J. Li, P. Sarosi, C. Shen, Y. Wang, and M.J. Mills: Prog. Mater. Sci., 2009, vol. 54, p. 54.10.1016/j.pmatsci.2009.03.010 ↗
11. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1588–1603.10.1007/s11661-009-9858-5 ↗
12. Q.Z. Chen and D.M. Knowles: Mater. Sci. Eng. A, 2003, vol. 356, pp. 352–67.10.1016/S0921-5093(03)00148-5 ↗
13. D. Caillard, G. Molénat, and V. Paidar: Mater. Sci. Eng. A, 1997, vol. 234, pp. 695–98.10.1016/S0921-5093(97)00278-5 ↗
14. M.S. Titus, Y.M. Eggeler, A. Suzuki, and T.M. Pollock: Acta Mater., 2015, vol. 82, pp. 530–39.10.1016/j.actamat.2014.08.033 ↗
15. T.M. Smith, R.R. Unocic, H. Deutchman, and M.J. Mills: Mater. High Temp., 2016, vol. 33, pp. 372–83.10.1080/09603409.2016.1180858 ↗
16. B.H. Kear and H.G.F. Wilsdorf: Transactions of The American Institute of Mining, Metallurgical and Petroleum Engineers.
17. R. (Nasa L.R.C. Bowman: 9th International Symposium on Superalloys.
18. J.S. van Sluytman, C.J. Moceri, and T.M. Pollock: Mater. Sci. Eng. A, 2015, vol. 639, pp. 747–54.10.1016/j.msea.2015.05.023 ↗
19. M. Khantha, V. Vitek, and D.P. Pope: Modell. Simul. Mater. Sci. Eng., 1994, vol. 2, pp. 587–96.10.1088/0965-0393/2/3A/012 ↗
20. G. Sauthoff: Intermetallics, 2007.10.1002/14356007.e14_e01.pub2 ↗
21. N. Yang, Y. Wei, C. Song, and L. Jiao: Acta Metall. Sin., 1986, vol. 22, pp. 477–83.
22. M. Dodaran, A.H. Ettefagh, S.M. Guo, M.M. Khonsari, W.J. Meng, N. Shamsaei, and S. Shao: Intermetallics (Barking), 2020, vol. 117, 106670.10.1016/j.intermet.2019.106670 ↗
23. D. Baither, C. Rentenberger, H.P. Karnthaler, and E. Nembach: Philos. Mag. A, 2002, vol. 82, pp. 1795–1805.10.1080/01418610208235690 ↗
24. G. Molenat and D. Caillard: Philos. Mag. A, 1991, vol. 64, pp. 1291–1317.10.1080/01418619108225350 ↗
25. W. Cai and W.D. Nix: Imperfections in Crystalline Solids, 2016.10.1017/CBO9781316389508 ↗
26. Y. Rao, T.M. Smith, M.J. Mills, and M. Ghazisaeidi: Acta Mater., 2018, vol. 148, pp. 173–84.10.1016/j.actamat.2018.01.055 ↗
27. T.M. Smith, B.D. Esser, N. Antolin, G.B. Viswanathan, T. Hanlon, A. Wessman, D. Mourer, W. Windl, D.W. McComb, and M.J. Mills: Acta Mater., 2015, vol. 100, pp. 19–31.10.1016/j.actamat.2015.08.053 ↗
28. A. Mottura, A. Janotti, and T.M. Pollock: Intermetallics (Barking), 2012, vol. 28, pp. 138–43.10.1016/j.intermet.2012.04.020 ↗
29. M. Kumar and V.K. Vasudevan: Acta Mater., 1996, vol. 44, pp. 4865–80.10.1016/S1359-6454(96)00092-4 ↗
30. M. Kumar and V.K. Vasudevan: Acta Mater., 1997, vol. 45, pp. 3203–22.10.1016/S1359-6454(97)00007-4 ↗
31. D.G. Pettifor Cottrell Alan Institute of Materials (London England): Electron Theory in Alloy Design, Institute of Materials, London, 1992.
32. H. Hasan, P. Mlkvik, P.D. Haynes, and V.A. Vorontsov: Materialia (Oxford), 2020, vol. 9, 100555.10.1016/j.mtla.2019.100555 ↗
33. G. Kresse and J. Hafner: Phys. Rev. B, 1993, vol. 48, pp. 13115–18.10.1103/PhysRevB.48.13115 ↗
34. G. McCartney, T. Hacker, and B. Yang: Educause Review.
35. P.E. Blöchl: Phys. Rev. B, 1994, vol. 50, pp. 17953–79.10.1103/PhysRevB.50.17953 ↗
36. G. Kresse and D. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758–75.10.1103/PhysRevB.59.1758 ↗
37. G. Kresse and J. Furthmüller: Comput. Mater. Sci., 1996, vol. 6, pp. 15–50.10.1016/0927-0256(96)00008-0 ↗
38. G. Kresse and J. Furthmüller: Phys. Rev. B, 1996, vol. 54, pp. 11169–86.10.1103/PhysRevB.54.11169 ↗
39. R. Hu, G.M. Cheng, J.Q. Zhang, J.S. Li, T.B. Zhang, and H.Z. Fu: Intermetallics (Barking), 2013, vol. 33, pp. 60–66.10.1016/j.intermet.2012.09.017 ↗
40. V. Vitek: Prog. Mater Sci., 1992, vol. 36, pp. 1–27.10.1016/0079-6425(92)90003-P ↗
41. S. Zhao, G.M. Stocks, and Y. Zhang: Acta Mater., 2017, vol. 134, pp. 334–45.10.1016/j.actamat.2017.05.001 ↗
42. T.L. Achmad, W. Fu, H. Chen, C. Zhang, and Z.G. Yang: Comput. Mater. Sci., 2016, vol. 121, pp. 86–96.10.1016/j.commatsci.2016.04.031 ↗
43. M. Kanani, A. Hartmaier, and R. Janisch: Acta Mater., 2016, vol. 106, pp. 208–18.10.1016/j.actamat.2015.11.047 ↗
44. A.R. Natarajan and A. van der Ven: Npj Comput. Mater., 2020, vol. 6, pp. 80–89.10.1038/s41524-020-0348-z ↗
45. P. Vinet, J. Ferrantef, J.R. Smith, and J.H. Rose: J. Phys. C, 2022, https://doi.org/10.1088/0022-3719/19/20/001.10.1088/0022-3719/19/20/001 ↗
46. J.H. Rose, J. Ferrante, and J.R. Smith: Phys. Rev. Lett., 1981, vol. 47, pp. 675–78.10.1103/PhysRevLett.47.675 ↗
47. A. Jain, G. Hautier, C.J. Moore, S. Ping Ong, C.C. Fischer, T. Mueller, K.A. Persson, and G. Ceder: Comput. Mater. Sci., 2011, vol. 50, pp. 2295–2310.10.1016/j.commatsci.2011.02.023 ↗
48. K.S. Chan, Y.D. Lee, and Y.M. Pan: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 523–37.10.1007/s11661-006-0024-z ↗
49. K.V. Vamsi and S. Karthikeyan: Superalloys, 2012, vol. 3, pp. 521–30.10.7449/2012/Superalloys_2012_521_530 ↗
50. K. v. Vamsi and S. Karthikeyan: MATEC Web of Conferences, 2014, vol. 14, pp. 1–6.10.1051/matecconf/20141417007 ↗
51. J. Kim: J. Alloy. Compd., 2015, vol. 650, pp. 564–71.10.1016/j.jallcom.2015.08.035 ↗
52. A. Zunger, S.H. Wei, L.G. Ferreira, and J.E. Bernard: Phys. Rev. Lett., 1990, vol. 65, pp. 353–56.10.1103/PhysRevLett.65.353 ↗
53. J.M. Sanchez: Phys. Rev. B, 1993, vol. 48, pp. 14013–15.10.1103/PhysRevB.48.14013 ↗
54. P. Srimannarayana, K. V. Vamsi, and S. Karthikeyan: MATEC Web of Conferences, https://doi.org/10.1051/matecconf/20141415003.10.1051/matecconf/20141415003 ↗
55. J.B. Singh, M. Sundararaman, and P. Mukhopadhyay: Philos. Mag. A, 2000, vol. 80, pp. 1983–2010.10.1080/01418610008212147 ↗
56. W. Cai, V. v. Bulatov, J. Chang, J. Li, and S. Yip: in Dislocations in Solids, 2004.
57. J. Wang, H. Sehitoglu, and H.J. Maier: Int. J. Plast, 2014, vol. 54, pp. 247–66.10.1016/j.ijplas.2013.08.017 ↗
58. B. Joos and Q. Ren: Phys. Rev. B, 1994, vol. 50, pp. 5890–98.10.1103/PhysRevB.50.5890 ↗
59. B. Joós and M.S. Duesbery: Phys. Rev. Lett., 1997, vol. 78, pp. 266–69.10.1103/PhysRevLett.78.266 ↗
60. G. Schoeck: Mater. Sci. Eng. A, 2005, vol. 400–401, pp. 7–17.10.1016/j.msea.2005.03.050 ↗
61. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1–30.10.1016/0956-7151(92)90195-K ↗
62. D. Hull and D.J. Bacon: Introduction to Dislocations, vol. 5, 2011.10.1016/B978-0-08-096672-4.00003-7 ↗
63. J.P. Hirth, J. Lothe, and T. Mura: Theory of Dislocations (2nd Ed.), 1983.10.1115/1.3167075 ↗
64. P. Chowdhury, H. Sehitoglu, W. Abuzaid, and H.J. Maier: Int. J. Plast, 2015, vol. 71, pp. 32–61.10.1016/j.ijplas.2015.04.003 ↗
65. S. Mahajan and G.Y. Chin: Acta Metall., 1973, vol. 21, pp. 1353–63.10.1016/0001-6160(73)90085-0 ↗
66. Y.M. Juan and E. Kaxiras: Philos. Mag. A, 1996, vol. 74, pp. 1367–84.10.1080/01418619608240729 ↗
67. J. Wang and H. Sehitoglu: Intermetallics (Barking), 2014, vol. 52, pp. 20–31.10.1016/j.intermet.2014.03.009 ↗
68. V. Paidar, D.P. Pope, and V. Vitek: Acta Metall., 1984, vol. 32, pp. 435–48.10.1016/0001-6160(84)90117-2 ↗
69. V. Vitek: Intermetallics (Barking), 1998, vol. 6, pp. 579–85.10.1016/S0966-9795(98)00040-5 ↗
70. M. Yamaguchi, V. Paidar, D.P. Pope, and V. Vitek: Philos. Mag. A, 1982, vol. 45, pp. 867–82.10.1080/01418618208239909 ↗