journal article·2022-11

High Density of Interfaces With Severely Mechanical Difference Controlled High Ductility in Heterogeneous Materials Based on Crystal Plasticity

Yong Zhang, Xian-Cheng Zhang, Yun-Fei Jia, Dong-Feng Li, Guang-Jian Yuan, Hao Chen, Shan-Tung Tu

Publisher page

Abstract

The synthesis of various heterogeneous structures has provided a new design principle for the unprecedented mechanical properties of metallic materials, such as strength-ductility synergy and extraordinary strain hardening. However, the key parameter that controls such properties remains a challenging issue. For solving this, a series of simulations of HSs with precisely controlled microstructure have been done to examine its effect on mechanical properties based on the crystal plasticity model which is modified to take grain boundary hardening, hetero-deformation induced hardening and size-dependent damage variable into account. As for the microstructures with various grain size distributions (100 nm to 100 μm) for pure nickel and low carbon steels, the numerical results show good agreement with the experimental data in regards to the yield stress, subsequent strain hardening and uniform ductility. Furthermore, by manipulating the spatial distribution of coarse grains, the deformation mechanisms of three typical types of heterogeneous structures with bimodal size distributions were analyzed. In addition, the relationship between the interfaces with severely mechanical difference and strain hardening was quantitatively investigated. Overall, these findings can provide valuable guidance to the optimal design of heterogeneous microstructures with superior properties. Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. H.D. Espinosa, J.E. Rim, F. Barthelat, and M.J. Buehler: Prog. Mater Sci., 2009, vol. 54(8), pp. 1059–1100.10.1016/j.pmatsci.2009.05.001 ↗
2. Y.S. Lin, C.T. Wei, E.A. Olevsky, and M.A. Meyers: J. Mech. Behav. Biomed. Mater., 2011, vol. 4(7), pp. 1145–56.10.1016/j.jmbbm.2011.03.024 ↗
3. L. Lu, Y. Shen, X. Chen, L. Qian, and K. Lu: Science, 2004, vol. 304(5669), pp. 422–26.10.1126/science.1092905 ↗
4. B. Farrokh and A.S. Khan: Int. J. Plast, 2009, vol. 25(5), pp. 715–32.10.1016/j.ijplas.2008.08.001 ↗
5. X. Li and K. Lu: Science, 2019, vol. 364(6442), p. 733.10.1126/science.aaw9905 ↗
6. P.C. Zhao, G.J. Yuan, R.Z. Wang, B. Guan, Y.F. Jia, X.C. Zhang, and S.T. Tu: J. Mater. Sci. Technol., 2021, vol. 83, pp. 196–207.10.1016/j.jmst.2021.01.019 ↗
7. G.J. Fan, H. Choo, P.K. Liaw, and E.J. Lavernia: Acta Mater., 2006, vol. 54(7), pp. 1759–66.10.1016/j.actamat.2005.11.044 ↗
8. B. Flipon, C. Keller, L.G. de la Cruz, E. Hug, and F. Barbe: Mater. Sci. Eng. A, 2018, vol. 729, pp. 249–56.10.1016/j.msea.2018.05.064 ↗
9. S. Patra, S.M. Hasan, N. Narasaiah, and D. Chakrabarti: Mater. Sci. Eng. A, 2012, vol. 538, pp. 145–55.10.1016/j.msea.2011.12.114 ↗
10. Y. Wang, C. Huang, Y. Li, F. Guo, Q. He, M. Wang, X. Wu, R.O. Scattergood, and Y. Zhu: Int. J. Plast., 2020, vol. 124, pp. 186–98.10.1016/j.ijplas.2019.08.012 ↗
11. L. Zhu, C. Wen, C. Gao, X. Guo, Z. Chen, and J. Lu: Int. J. Plast., 2019, vol. 114, pp. 272–88.10.1016/j.ijplas.2018.11.005 ↗
12. S.K. Vajpai, M. Ota, Z. Zhang, and K. Ameyama: Mater. Res. Lett., 2016, vol. 4(4), pp. 191–97.10.1080/21663831.2016.1218965 ↗
13. L. Lu, X. Chen, X. Huang, and K. Lu: Science, 2009, vol. 323(5914), pp. 607–10.10.1126/science.1167641 ↗
14. X. Wu, M. Yang, F. Yuan, G. Wu, Y. Wei, X. Huang, and Y. Zhu: Proc Natl Acad Sci USA, 2015, vol. 112(47), pp. 14501–05.10.1073/pnas.1517193112 ↗
15. X. Liu, L. Sun, L. Zhu, J. Liu, K. Lu, and J. Lu: Acta Mater., 2018, vol. 149, pp. 397–406.10.1016/j.actamat.2018.01.047 ↗
16. Y.F. Wang, M.S. Wang, X.T. Fang, F.J. Guo, H.Q. Liu, R.O. Scattergood, C.X. Huang, and Y.T. Zhu: Int. J. Plast., 2019, vol. 123, pp. 196–207.10.1016/j.ijplas.2019.07.019 ↗
17. P.-C. Zhao, B. Chen, Z.-G. Zheng, B. Guan, X.-C. Zhang, and S.-T. Tu: Metall. Mater. Trans. A, 2021, vol. 52A(1), pp. 394–412.10.1007/s11661-020-06071-x ↗
18. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419(6910), pp. 912–15.10.1038/nature01133 ↗
19. G. Fan, L. Geng, H. Wu, K. Miao, X. Cui, H. Kang, T. Wang, H. Xie, and T. Xiao: Scr. Mater., 2017, vol. 135, pp. 63–67.10.1016/j.scriptamat.2017.03.030 ↗
20. M.F. Ashby: Philos. Mag., 1970, vol. 21(170), pp. 399–424.10.1080/14786437008238426 ↗
21. H. Gao and Y. Huang: Scr. Mater., 2003, vol. 48(2), pp. 113–18.10.1016/S1359-6462(02)00329-9 ↗
22. J. Zhao, X. Lu, F. Yuan, Q. Kan, S. Qu, G. Kang, and X. Zhang: Int. J. Plast., 2020, vol. 125, pp. 314–20.10.1016/j.ijplas.2019.09.018 ↗
23. X. Lu, X. Zhang, M. Shi, F. Roters, G. Kang, and D. Raabe: Int. J. Plast., 2019, vol. 113, pp. 52–73.10.1016/j.ijplas.2018.09.007 ↗
24. J. Liu, J. Li, G. Dirras, K. Ameyama, F. Cazes, and M. Ota: Int. J. Plast., 2018, vol. 100, pp. 192–207.10.1016/j.ijplas.2017.10.006 ↗
25. J. Cheng and S. Ghosh: J. Mech. Phys. Solids, 2017, vol. 99, pp. 512–38.10.1016/j.jmps.2016.12.008 ↗
26. B. Raeisinia, C.W. Sinclair, W.J. Poole, and C.N. Tomé: Modell. Simul. Mater. Sci. Eng., 2008, vol. 16(2), p. 025001.10.1088/0965-0393/16/2/025001 ↗
27. S. Berbenni, V. Favier, and M. Berveiller: Int. J. Plast., 2007, vol. 23(1), pp. 114–42.10.1016/j.ijplas.2006.03.004 ↗
28. J. Li, W. Lu, S. Chen, and C. Liu: Int J Plast., 2020, vol. 126, p. 102626.10.1016/j.ijplas.2019.11.005 ↗
29. L. Zhu, H. Ruan, A. Chen, X. Guo, and J. Lu: Acta Mater., 2017, vol. 128, pp. 375–90.10.1016/j.actamat.2017.02.035 ↗
30. X. Wang, F. Cazes, J. Li, A. Hocini, K. Ameyama, and G. Dirras: Mech. Mater., 2019, vol. 128, pp. 117–28.10.1016/j.mechmat.2018.10.006 ↗
31. R. Yuan, I.J. Beyerlein, and C. Zhou: Mater. Res. Lett., 2016, vol. 5(4), pp. 251–57.10.1080/21663831.2016.1255264 ↗
32. Y. Zhu and X. Wu: Mater. Res. Lett., 2019, vol. 7(10), pp. 393–98.10.1080/21663831.2019.1616331 ↗
33. X. Wu and Y. Zhu: Mater. Res. Lett., 2017, vol. 5(8), pp. 527–32.10.1080/21663831.2017.1343208 ↗
34. H.S. Arora, A. Ayyagari, J. Saini, K. Selvam, S. Riyadh, M. Pole, H.S. Grewal, and S. Mukherjee: Sci. Rep., 2019, vol. 9(1), p. 1972.10.1038/s41598-019-38707-3 ↗
35. G.S. Sun, L.X. Du, J. Hu, and R.D.K. Misra: Mater. Sci. Eng. A, 2018, vol. 709, pp. 254–64.10.1016/j.msea.2017.10.054 ↗
36. E.H. Lee, Elastic-Plastic Deformation at Finite Strains, (1969).10.21236/AD0678483 ↗
37. J.R. Rice: J. Mech. Phys. Solids, 1971, vol. 19(6), pp. 433–55.10.1016/0022-5096(71)90010-X ↗
38. E.P. Busso and F.A. McClintock: Int. J. Plast, 1996, vol. 12(1), pp. 1–28.10.1016/S0749-6419(95)00041-0 ↗
39. D.-F. Li and N.P. O’Dowd: J. Mech. Phys. Solids, 2011, vol. 59(12), pp. 2421–41.10.1016/j.jmps.2011.09.008 ↗
40. D.-F. Li, B.J. Golden, and N.P. O’Dowd: Acta Mater., 2014, vol. 80, pp. 445–56.10.1016/j.actamat.2014.08.012 ↗
41. R. Hill and K. Havner: J. Mech. Phys. Solids, 1982, vol. 30(1–2), pp. 5–22.10.1016/0022-5096(82)90010-2 ↗
42. G. Venkatramani, S. Ghosh, and M. Mills: Acta Mater., 2007, vol. 55(11), pp. 3971–86.10.1016/j.actamat.2007.03.017 ↗
43. G. Venkataramani, K. Kirane, and S. Ghosh: Int. J. Plast., 2008, vol. 24(3), pp. 428–54.10.1016/j.ijplas.2007.05.001 ↗
44. C.X. Huang, Y.F. Wang, X.L. Ma, S. Yin, H.W. Höppel, M. Göken, X.L. Wu, H.J. Gao, and Y.T. Zhu: Mater. Today, 2018, vol. 21(7), pp. 713–19.10.1016/j.mattod.2018.03.006 ↗
45. J. Li, G.J. Weng, S. Chen, and X. Wu: Int. J. Plast., 2017, vol. 88, pp. 89–107.10.1016/j.ijplas.2016.10.003 ↗
46. C.O. Frederick and P.J. Armstrong: Mater. High Temp., 2007, vol. 24(1), pp. 1–26.10.3184/096034007X207589 ↗
47. Y. Zhang, H. Chen, Y.F. Jia, D.F. Li, G.J. Yuan, X.C. Zhang, and S.T. Tu: Int. J. Mech. Sci., 2021, vol. 1(191), p. 106068.10.1016/j.ijmecsci.2020.106068 ↗
48. H.K. Park, K. Ameyama, J. Yoo, H. Hwang, and H.S. Kim: Mater. Res. Lett., 2018, vol. 6(5), pp. 261–67.10.1080/21663831.2018.1439115 ↗
49. D.-F. Li, R.A. Barrett, P.E. O’Donoghue, N.P. O’Dowd, and S.B. Leen: J. Mech. Phys. Solids, 2017, vol. 101, pp. 44–62.10.1016/j.jmps.2016.12.010 ↗
50. J. Sheng, P. La, J. Su, J. Ren, J. Ma, Y. Shi, Z. Li, and J. Wang: Mod. Phys. Lett. B, 2018, vol. 32(17), p. 1850182.10.1142/S0217984918501828 ↗
51. D.-F. Li, C.M. Davies, S.-Y. Zhang, C. Dickinson, and N.P. O’Dowd: Acta Mater., 2013, vol. 61(10), pp. 3575–84.10.1016/j.actamat.2013.02.038 ↗
52. S.X. Li and G.R. Cui: Dependence of strength, elongation, and toughness on grain size in metallic structural materials. J. Appl. Phys., 2007, vol. 101(8), p. 083525.10.1063/1.2720184 ↗
53. J.S. Hayes, R. Keyte, and P.B. Prangnell: Mater. Sci. Technol., 2013, vol. 16(11–12), pp. 1259–63.
54. M. Spiegel: Theory and Problems of Probability and Statistics, McGraw-Hill, New York, 1975.
55. Q. Du, V. Faber, and M. Gunzburger: SIAM Rev., 1999, vol. 41(4), pp. 637–76.10.1137/S0036144599352836 ↗
56. B. Flipon, C. Keller, R. Quey, and F. Barbe: Int. J. Solids Struct., 2020, vol. 184, pp. 178–92.10.1016/j.ijsolstr.2019.02.005 ↗
57. S. Fu, J. Liu, and Z. Wang: Mater. Sci. Eng. A, 2019, vol. 751, pp. 253–62.10.1016/j.msea.2019.02.051 ↗
58. I.A. Ovid’ko, R.Z. Valiev, and Y.T. Zhu: Prog. Mater. Sci., 2018, vol. 94, pp. 462–540.10.1016/j.pmatsci.2018.02.002 ↗
59. R.Q. Cao, J. Pan, Y. Lin, and Y. Li: Mater. Sci. Eng. A, 2019, vol. 760, pp. 458–68.10.1016/j.msea.2019.05.105 ↗
60. Y. Lin, J. Pan, H.F. Zhou, H.J. Gao, and Y. Li: Acta Mater., 2018, vol. 153, pp. 279–89.10.1016/j.actamat.2018.04.065 ↗
61. A. Bhattacharya, A. Karmakar, A. Karani, M. Ghosh, and D. Chakrabarti: J. Mater. Eng. Perform., 2019, vol. 28(2), pp. 753–68.10.1007/s11665-018-3846-0 ↗
62. Y. Shi, B. Li, F. Gao, L. Wang, F. Qin, H. Liu, and S. Li: Materialia, 2019, vol. 5, p. 100181.10.1016/j.mtla.2018.100181 ↗
63. R.W. Armstrong: Mater. Trans., 2014, vol. 55(1), pp. 2–12.10.2320/matertrans.MA201302 ↗
64. Y. Estrin, H.S. Kim, and F.R.N. Nabarro: Acta Mater., 2007, vol. 55(19), pp. 6401–07.10.1016/j.actamat.2007.07.052 ↗
65. F. Yin, G.J. Cheng, R. Xu, K. Zhao, Q. Li, J. Jian, S. Hu, S. Sun, L. An, and Q. Han: Scr. Mater., 2018, vol. 155, pp. 26–31.10.1016/j.scriptamat.2018.06.014 ↗
66. S. Takaki, K. Kawasaki, and Y. Kimura: J. Mater. Process. Technol., 2001, vol. 117(3), pp. 359–63.10.1016/S0924-0136(01)00797-X ↗
67. M. Considère: Ann. Ponts Chaussees, 1885, vol. 9, p. 574.
68. M. Yang, Y. Pan, F. Yuan, Y. Zhu, and X. Wu: Mater. Res. Lett., 2016, vol. 4(3), pp. 145–51.10.1080/21663831.2016.1153004 ↗
69. D.H. Shin and K.-T. Park: Mater. Sci. Eng. A, 2005, vol. 410–411, pp. 299–302.10.1016/j.msea.2005.08.025 ↗
70. R.B. Singh, N.K. Mukhopadhyay, G.V.S. Sastry, and R. Manna: Metall. Mater. Trans. A, 2017, vol. 48A(3), pp. 1189–1203.10.1007/s11661-016-3892-x ↗
71. N. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa: Scr. Mater., 1999, vol. 40(7), pp. 795–800.10.1016/S1359-6462(99)00015-9 ↗
72. N. Tsuji, R. Ueji, Y. Minamino, and Y. Saito: Scr. Mater., 2002, vol. 46(4), pp. 305–10.10.1016/S1359-6462(01)01243-X ↗
73. S. Takaki, D. Akama, N. Nakada, and T. Tsuchiyama: Mater. Trans., 2014, vol. 55(1), pp. 28–34.10.2320/matertrans.MA201314 ↗
74. Y.Z. Tian, Y.P. Ren, S. Gao, R.X. Zheng, J.H. Wang, H.C. Pan, Z.F. Zhang, N. Tsuji, and G.W. Qin: J. Mater. Sci. Technol., 2020, vol. 48, pp. 31–35.10.1016/j.jmst.2019.12.023 ↗
75. Y. Zhang, P.C. Millett, M. Tonks, and B. Biner: Scr. Mater., 2012, vol. 66(2), pp. 117–20.10.1016/j.scriptamat.2011.10.021 ↗
76. C.C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters, and D. Raabe: Acta Mater., 2014, vol. 81, pp. 386–400.10.1016/j.actamat.2014.07.071 ↗
77. B. Ji and H. Gao: Mechanical properties of nanostructure of biological materials. J. Mech. Phys. Solids, 2004, vol. 52(9), pp. 1963–90.10.1016/j.jmps.2004.03.006 ↗
78. D. Jia, K.T. Ramesh, and E. Ma: Scr. Mater., 1999, vol. 42(1), pp. 73–78.10.1016/S1359-6462(99)00312-7 ↗
79. V. Patlan, A. Vinogradov, K. Higashi, and K. Kitagawa: Mater. Sci. Eng. A, 2001, vol. 300(1), pp. 171–82.10.1016/S0921-5093(00)01682-8 ↗
80. Y. Liu, Y. Cao, Q. Mao, H. Zhou, Y. Zhao, W. Jiang, Y. Liu, J.T. Wang, Z. You, and Y. Zhu: Acta Mater, 2020, vol. 189, pp. 129–44.10.1016/j.actamat.2020.03.001 ↗
81. G. Niu, H. Wu, D. Zhang, N. Gong, and D. Tang: Metals, 2017, vol. 7(8), p. 316.10.3390/met7080316 ↗
82. X. Li, L. Lu, J. Li, X. Zhang, and H. Gao: Nat. Rev. Mater., 2020, vol. 5(9), pp. 706–23.10.1038/s41578-020-0212-2 ↗
83. H. Gao, Y. Huang, W.D. Nix, and J.W. Hutchinson: J. Mech. Phys. Solids, 1999, vol. 47(6), pp. 1239–63.10.1016/S0022-5096(98)00103-3 ↗