A CeO2-Doped Copper Matrix Self-Lubricating Composite With Well-Balanced Mechanical and Lubricating Properties Fabricated by Spark Plasma Sintering
Source abstract
Abstract
Abstract Metal matrix self-lubricating composites are required to possess well-balanced mechanical and lubricating properties when they are applied as mechanical parts. However, the decomposition of disulfide lubricants usually occurs during the sintering process and unfortunately reduces their mechanical properties. In this work, CeO2 was added to a model Cu/WS2 composite fabricated by spark plasma sintering (SPS). The effect of CeO2 doping on the interfacial microstructure and mechanical and tribological properties was investigated. The results indicated that CeO2 nanoparticles preferentially adsorbed onto the lubricant disulfide, which segmented the Cu/WS2 diffusion layer and reduced Joule heat at the interface while competing with WS2 to intensify the heat dissipation. As a consequence, interfacial overheating was largely suppressed, and WS2 decomposition was successfully prevented. The CeO2-doped Cu/WS2 composite breaks through a trade-off between mechanical and lubricating properties, exhibiting a high bending strength of 295.1 MPa, a hardness of 98.5 HV, a low friction coefficient of 0.19, and a wear rate as low as 4.12 × 10−5 mm3/N m. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. K. Myoshi: NASA/TM—2007-214668, Ohio, 2007.
2. L. Reinert, I. Green, S. Gimmler, B. Lechthaler, F. Mucklich, and S. Suarez: Wear, 2018, vol. 408–409, pp. 72–85.10.1016/j.wear.2018.05.003 ↗
3. A. Katz, M. Redlich, L. Rapoport, H.D. Wagner, and R. Tenne: Tribol. Lett., 2006, vol. 21, pp. 135–59.10.1007/s11249-006-9029-4 ↗
4. D. Wang, W. Chen, Q. Sun, L. Wang, S. Zhu, J. Cheng, and J. Yang: Wear, 2021, vol. 480–481, p. 203933.10.1016/j.wear.2021.203933 ↗
5. J. Xiao, W. Zhang, and C. Zhang: Wear, 2018, vol. 412–413, pp. 109–19.10.1016/j.wear.2018.07.024 ↗
6. H. Nautiyal, S. Kumari, R. Tyagi, U.S. Rao, and O.P. Khatri: Tribol. Int., 2021, vol. 153, p. 106645.10.1016/j.triboint.2020.106645 ↗
7. S. Zhu, J. Cheng, Z. Qiao, and J. Yang: Tribol. Int., 2019, vol. 133, pp. 206–23.10.1016/j.triboint.2018.12.037 ↗
8. H.L. Kathryn, P.A. Angela, S.W. Gregory, K.A. Brandon, and B.S. Gregory: Macromolecules, 2015, vol. 48, pp. 3739–45.10.1021/acs.macromol.5b00452 ↗
9. P. Mosaner, R. Belli, C. Cestari, and A. Miotello: Surf. Coat. Technol., 2009, vol. 203, pp. 2575–78.10.1016/j.surfcoat.2009.02.043 ↗
10. J. Chen, J. Chen, S. Wang, Q. Sun, J. Cheng, Y. Yu, and J. Yang: Tribol. Int., 2020, vol. 148, p. 106333.10.1016/j.triboint.2020.106333 ↗
11. A. Rosenkranz, H. Costa, M.Z. Baykara, and A. Martini: Tribol. Int., 2021, vol. 155, p. 106792.10.1016/j.triboint.2020.106792 ↗
12. L. Li, P.A. Agyakwa, and C.M. Johnson: Acta Mater., 2010, vol. 58, pp. 3429–43.10.1016/j.actamat.2010.02.018 ↗
13. K.P. Furlan, J.D.B. de Mello, and A.N. Klein: Tribol. Int., 2018, vol. 120, pp. 280–98.10.1016/j.triboint.2017.12.033 ↗
14. X. Shi, S. Song, W. Zhai, M. Wang, Z. Xu, J. Yao, Q. Abid, and Q. Zhang: Mater. Des., 2014, vol. 55, pp. 75–84.10.1016/j.matdes.2013.09.051 ↗
15. M. Ratoi, V.B. Niste, J. Walker, and J. Zekonyte: Tribol. Lett., 2013, vol. 52, pp. 81–91.10.1007/s11249-013-0195-x ↗
16. M.F.C. Ordonez, M.C.M. Farias, S. Descartes, I.F. Machado, and R.M. Souza: Tribol. Int., 2021, vol. 160, p. 107035.10.1016/j.triboint.2021.107035 ↗
17. V.B. Niste, M. Ratioi, H. Tanaka, F. Xu, Y. Zhu, and J. Sugimura: Sci. Rep., 2017, vol. 7, p. 14665.10.1038/s41598-017-15297-6 ↗
18. Z. Yu, M. Chen, Q. Wang, X. Wang, and F. Wang: Acta Metall. Sin. (Engl. Lett.), 2021, vol. 34, pp. 913–24.10.1007/s40195-020-01187-w ↗
19. J. Zhou, C. Ma, X. Kang, L. Zhang, and X. Liu: Trans. Nonferr. Met. Soc. China, 2018, vol. 28, pp. 1176–85.10.1016/S1003-6326(18)64755-7 ↗
20. Q. Wang, M. Chen, Z. Shan, C. Sui, L. Zhang, S. Zhu, and F. Wang: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1416–23.10.1016/j.jmst.2017.06.014 ↗
21. D. Cheneler and A.R. Kennedy: Mater. Sci. Eng. A, 2020, vol. 789, p. 139528.10.1016/j.msea.2020.139528 ↗
22. R. Pahuja, M. Ramulu, and M. Hashish: Composites B, 2019, vol. 175, p. 107134.10.1016/j.compositesb.2019.107134 ↗
23. Y. Xie, X. Meng, Y. Li, D. Mao, L. Wan, and Y. Huang: Compos. Commun., 2021, vol. 26, p. 100776.10.1016/j.coco.2021.100776 ↗
24. D. Mao, X. Meng, Y. Xie, Y. Yang, Y. Xu, Z. Qin, Y. Chang, L. Wan, and Y. Huang: J. Alloys Compd., 2022, vol. 25, p. 162078.10.1016/j.jallcom.2021.162078 ↗
25. Y. Zhou, Y. Zan, S. Zheng, X. Shao, Q. Jin, B. Zhang, Q. Wang, B. Xiao, X. Ma, and Z. Ma: J. Mater. Sci. Technol., 2019, vol. 35, pp. 1825–30.10.1016/j.jmst.2019.04.019 ↗
26. Z. Hu, Z. Zhang, X. Cheng, F. Wang, Y. Zhang, and S. Li: Mater. Des., 2020, vol. 191, p. 108662.10.1016/j.matdes.2020.108662 ↗
27. S.H. Risbud and Y. Han: Scripta Mater., 2013, vol. 69, pp. 105–06.10.1016/j.scriptamat.2013.02.024 ↗
28. T. Fujii, K. Tohgo, M. Iwao, and Y. Shimamura: J. Alloys Compd., 2018, vol. 766, pp. 1–11.10.1016/j.jallcom.2018.06.304 ↗
29. C. Madec, S.L. Gallet, B. Salesse, N. Geoffroy, and F. Bernard: J. Mater. Process. Technol., 2018, vol. 254, pp. 277–82.10.1016/j.jmatprotec.2017.11.004 ↗
30. E. Colombini, R. Rosa, L. Trombi, M. Zadra, A. Casagrande, and P. Veronesi: Mater. Chem. Phys., 2018, vol. 210, pp. 78–86.10.1016/j.matchemphys.2017.06.065 ↗
31. P.E. Blochl: Phys. Rev. B, 1994, vol. 50, p. 17953.10.1103/PhysRevB.50.17953 ↗
32. G. Kresse and D. Joubert: Phys. Rev. B, 1999, vol. 59, p. 1758.10.1103/PhysRevB.59.1758 ↗
33. G. Kresse and J. Furthmuller: Phys. Rev. B, 1996, vol. 54, pp. 11169–86.10.1103/PhysRevB.54.11169 ↗
34. J.S. Ahn, G. Kim, Y.S. Jung, and S.J. Ahn: Nucl. Eng. Technol., 2021, vol. 53, pp. 583–91.10.1016/j.net.2020.07.016 ↗
35. B. Mohanty, A. Chattopadhyay, and J. Nayak: J. Alloys Compd., 2021, vol. 850, p. 156735.10.1016/j.jallcom.2020.156735 ↗
36. Z. Huang, T. Wu, S. Kong, Q. Meng, W. Zhuang, P. Jiang, and X. Bao: J. Mater. Chem. A, 2016, vol. 4, pp. 10159–65.10.1039/C6TA03122F ↗
37. J. Kim, S. Yu, S. Lee, S. Lee, K. Kim, Y. Kim, and C. Yang: Curr. Comput. Aided Drug Des., 2020, vol. 10, p. 140.
38. Z. Lu, J. Kullgren, Z. Yang, and K. Hermansson: J. Phys. Chem. C, 2012, vol. 116, pp. 8417–25.10.1021/jp2092913 ↗
39. A. Colantoni, L. Longo, K. Boubaker, D. Monarca, M. Cecchini, S. Cividino, A. Yumak, P. Biondi, S. Di Giacinto, and G. Menghini: Mater. Res. Express, 2015, vol. 2, p. 035903.10.1088/2053-1591/2/3/035903 ↗
40. H. Conrad: Mater. Sci. Eng. A, 2002, vol. 322, pp. 100–07.10.1016/S0921-5093(01)01122-4 ↗
41. J. Narayan: Scripta Mater., 2013, vol. 69, pp. 107–11.10.1016/j.scriptamat.2013.02.020 ↗
42. J.E. Garay, S.C. Glade, U. Anselmi-Tamburini, P. Asoka-Kumar, and Z.A. Munir: Appl. Phys. Lett., 2004, vol. 85, pp. 573–75.10.1063/1.1774268 ↗
43. P.A. Geslin, B. Appolaire, and A. Finel: Phys. Rev. Lett., 2015, vol. 115, p. 265501.10.1103/PhysRevLett.115.265501 ↗
44. J.S. Cha, D.H. Kim, H.Y. Hong, and K. Park: J. Mater. Sci. Technol., 2020, vol. 55, pp. 212–22.10.1016/j.jmst.2020.02.034 ↗
45. M. Albino, U.C. Chung, A. Kassas, J. Lesseur, D. Bernard, C. Elissalde, and M. Maglione: J. Am. Ceram. Soc., 2016, vol. 99, pp. 406–09.10.1111/jace.14052 ↗
46. G. Zheng, X. Su, X. Li, T. Liang, H. Xie, X. She, Y. Yan, C. Uher, M.G. Kanatzidis, and X. Tang: Adv. Energy Mater., 2016, vol. 6, p. 1600595.10.1002/aenm.201600595 ↗
47. F. Chen, S. Yang, J. Wu, J.A. Galaviz Perez, Q. Shen, J.M. Schoenung, E.J. Lavernia, and L. Zhang: J. Am. Ceram. Soc., 2015, vol. 98, pp. 732–40.10.1111/jace.13381 ↗
48. D. Cahen and I. Lubomirsky: Chem. Mater., 1998, vol. 10, pp. 2596–98.10.1021/cm9802954 ↗
49. Y. Fan, Y. Zhuo, and L. Li: Appl. Surf. Sci., 2017, vol. 420, pp. 465–71.10.1016/j.apsusc.2017.04.233 ↗
50. V. Orazi, P. Bechthold, P.V. Jasen, R. Faccio, M.E. Pronsato, and E.A. Gonzalez: Appl. Surf. Sci., 2017, vol. 420, pp. 383–89.10.1016/j.apsusc.2017.05.159 ↗