journal article·2022-06Open access

Effect of Deformation Sequence and Coiling Conditions on Precipitation Strengthening in High Ti–Nb-Microalloyed Steels

L. G. Sesma, B. Lopez, B. Pereda

Abstract

Abstract In this work, multipass torsion tests followed by coiling simulations under different conditions have been performed with a reference Nb (0.03 pct) and a high Ti (0.1 pct)–Nb-microalloyed (0.03 pct) steel. In the case of the high Ti steel, estimated yield strengths close to or over 700 MPa were obtained for some of the conditions researched. However, a very significant effect of previous austenite grain size and strain accumulation on precipitation strengthening has also been observed. As a result, depending on deformation sequence and final cooling conditions, the coiling simulation temperatures that lead to the highest mechanical strength varied from 600 °C to 500 °C. The effect of increasing strain accumulation was mainly related to higher phase transformation temperatures, which led to a lower driving force for precipitation and higher microalloying element diffusivity, resulting in the formation of less and coarser precipitates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. M.A. Altuna, A. Iza-Mendia, and I. Gutierrez: Metall. Mater. Trans. A., 2012, vol. 43A, pp. 4571–86. https://doi.org/10.1007/s11661-012-1270-x.10.1007/s11661-012-1270-x ↗
2. S.F. Medina, M. Chapa, P. Valles, A. Quispe, and M.I. Vega: ISIJ Int., 1999, vol. 39, pp. 930–6. https://doi.org/10.2355/isijinternational.39.930.10.2355/isijinternational.39.930 ↗
3. S. Freeman and R.W.K. Honeycombe: Met. Sci., 1977, vol. 11, pp. 59–64. https://doi.org/10.1179/msc.1977.11.2.59.10.1179/msc.1977.11.2.59 ↗
4. R.W.K. Honeycombe and R.F. Mehl: Metall. Mater. Trans., 1976, vol. 7, pp. 915–36. https://doi.org/10.1007/BF02644057.10.1007/BF02644057 ↗
5. Y. Funakawa, T. Shiozaki, and K. Tomita: ISIJ Int., 2004, vol. 44, pp. 1945–51. https://doi.org/10.2355/isijinternational.44.1945.10.2355/isijinternational.44.1945 ↗
6. Y. Funakawa: ISIJ Int., 2019, vol. 60, pp. 2086–95. https://doi.org/10.2320/matertrans.M2018197.10.2320/matertrans.M2018197 ↗
7. V.S.A. Challa, W.H. Zhou, R.D.K. Misra, R. O’Malley, and S.G. Jansto: Mat. Sci. Eng., 2014, vol. 595A, pp. 143–53. https://doi.org/10.1016/j.msea.2013.12.002.10.1016/j.msea.2013.12.002 ↗
8. F.Z. Bu, X.M. Wang, S.W. Yang, J. Shang, and R.D.K. Misra: Mat. Sci. Eng. A., 2015, vol. 620, pp. 22–9. https://doi.org/10.1016/j.msea.2014.09.111.10.1016/j.msea.2014.09.111 ↗
9. C. Chen, J. Yang, C. Chen, and S. Cheng: Mater. Character., 2017, vol. 114, pp. 18–9. https://doi.org/10.1016/j.matchar.2016.01.023.10.1016/j.matchar.2016.01.023 ↗
10. J. Chen and G. Wang: Steel Res., 2015, vol. 86, pp. 821–24. https://doi.org/10.1002/srin.201400275.10.1002/srin.201400275 ↗
11. I. Timokhina, M.K. Miller, J. Wang, H. Beladi, P. Cizek, and P.D. Hodgson: Mater. Des., 2016, vol. 111, pp. 222–29. https://doi.org/10.1016/j.matdes.2016.08.086.10.1016/j.matdes.2016.08.086 ↗
12. R. Ueomori, R. Chijiwa, H. Tamehiro, and H. Morikawa: Appl. Surf. Sci., 1944, vol. 76–77, pp. 255–60. https://doi.org/10.1016/0169-4332(94)90351-4.10.1016/0169-4332(94)90351-4 ↗
13. J.H. Jang, C.H. Lee, Y.U. Heo, and D.W. Suh: Acta Mater., 2012, vol. 60, pp. 208–17. https://doi.org/10.1016/j.actamat.2011.09.051.10.1016/j.actamat.2011.09.051 ↗
14. X. Mao, X. Huo, X. Sun, and Y. Chai: J. Mater. Process. Technol., 2010, vol. 210, pp. 1660–66. https://doi.org/10.1016/j.jmatprotec.2010.05.018.10.1016/j.jmatprotec.2010.05.018 ↗
15. L. Garcia-Sesma, B. Lopez, and B. Pereda: Mater. Sci. Eng. A., 2019, vol. 748, pp. 386–95. https://doi.org/10.1016/j.msea.2019.01.105.10.1016/j.msea.2019.01.105 ↗
16. P.K. Patra, S. Sam, M. Singhai, S.S. Hazra, G.D.J. Ram, and S.R. Bakshi: Trans. Indian Inst. Metals., 2017, vol. 70, pp. 1773–81. https://doi.org/10.1007/s12666-016-0975-8.10.1007/s12666-016-0975-8 ↗
17. B. Okamoto, A. Bogerstram, and J. Agren: Acta Mater., 2010, vol. 58, pp. 4783–90. https://doi.org/10.1016/j.actamat.2010.05.014.10.1016/j.actamat.2010.05.014 ↗
18. H.W. Yen, P.Y. Chen, C.Y. Huang, and J.R. Yang: Acta Mater., 2011, vol. 59, pp. 6264–74. https://doi.org/10.1016/j.actamat.2011.06.037.10.1016/j.actamat.2011.06.037 ↗
19. V.V. Natarajan, V.S.A. Challa, R.D.K. Misra, D.M. Sidorenko, and M.D. Mulholand: Mater. Sci. Eng. A., 2016, vol. 669A, pp. 1–9. https://doi.org/10.1016/j.msea.2016.04.007.10.1016/j.msea.2016.04.007 ↗
20. G. Larzabal, N. Isasti, J.M. Rodriguez-Ibabe, and P. Uranga: Metals, 2017, vol. 7. https://doi.org/10.3390/met7020065.10.3390/met7020065 ↗
21. S. Tsai, T. Su, J. Yang, C. Chen, Y. Wang and C. Huang: Mater. Des., 2017, pp. 319–25. https://doi.org/10.1016/j.matdes.2017.01.071.10.1016/j.matdes.2017.01.071 ↗
22. X. Li, F. Li, Y. Cui, B. Xiao, and X. Wang: Mater. Sci. Eng. A., 2016, vol. 677, pp. 340–48. https://doi.org/10.1016/j.msea.2016.09.070.10.1016/j.msea.2016.09.070 ↗
23. S.S. Hansen, J.B. Vander Sande, and M. Cohen: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 387–402. https://doi.org/10.1007/BF02654563.10.1007/BF02654563 ↗
24. S. Vervynckt, K. Verbeken, B. Lopez, and J.J. Jonas: Int. Mater. Rev., 2013, vol. 57, pp. 187–207. https://doi.org/10.1179/1743280411Y.0000000013.10.1179/1743280411Y.0000000013 ↗
25. K.B. Kang, O. Kwon, W.B. Lee, and C.G. Park: Scr. Mater., 1997, vol. 36, pp. 1303–8. https://doi.org/10.1016/S1359-6462(96)00359-4.10.1016/S1359-6462(96)00359-4 ↗
26. B. Pereda, J.M. Rodriguez-Ibabe, and B. Lopez: ISIJ Int., 2008, vol. 48, pp. 1467–556. https://doi.org/10.2355/isijinternational.48.1457.10.2355/isijinternational.48.1457 ↗
27. Glover and G. Sellars: Metall. Mater. Trans. B, vol. 765-775B, 1973, pp. 765–75. https://doi.org/10.1007/BF02643086.10.1007/BF02643086 ↗
28. S. Bechet and L. Beaujard: Rev. Met., 1952, vol. 52, pp. 830–6. https://doi.org/10.1051/metal/195552100830.10.1051/metal/195552100830 ↗
29. S.I. Wright: Mater. Sci. Technol., 2006, vol. 22, pp. 1287–96. https://doi.org/10.1179/174328406X130876.10.1179/174328406X130876 ↗
30. P. Thomas and P.A. Midgley: Top. Catal., 2002, vol. 21, pp. 109–38. https://doi.org/10.1023/A:1021377125838.10.1023/A:1021377125838 ↗
31. E. Courtois, T. Epicier, and C. Scott: Micron., 2006, vol. 37, pp. 492–502. https://doi.org/10.1016/j.micron.2005.10.009.10.1016/j.micron.2005.10.009 ↗
32. B. Pereda, Z. Aretxabaleta, and B. Lopez: J. Mater. Eng. Perform., 2015, vol. 24, pp. 1279–93. https://doi.org/10.1007/s11665-015-1387-3.10.1007/s11665-015-1387-3 ↗
33. L. Garcia-Sesma, B. Lopez, and B. Pereda: Metals, 2020, vol. 10(2). https://doi.org/10.3390/met10020165.10.3390/met10020165 ↗
34. J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, and B. Sundman: Calphad., 2002, vol. 26, pp. 273–312. https://doi.org/10.1016/S0364-5916(02)00037-8.10.1016/S0364-5916(02)00037-8 ↗
35. L. Llanos, B. Pereda, and B. Lopez: Metall. Mater. Trans. A., 2015, vol. 46A, pp. 5248–65. https://doi.org/10.1007/s11661-015-3066-2.10.1007/s11661-015-3066-2 ↗
36. M. Charleux, W.J. Poole, M. Militzer, and A. Deschamps: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 1635–47. https://doi.org/10.1007/s11661-001-0142-6.10.1007/s11661-001-0142-6 ↗
37. T. Sakuma and R.W.K. Honeycombe: Met. Sci., 1984, vol. 18, pp. 449–54. https://doi.org/10.1179/030634584790419791.10.1179/030634584790419791 ↗
38. P.D. Hodgson and R.K. Gibbs: ISIJ Int., 1992, vol. 32, pp. 1329–38. https://doi.org/10.2355/isijinternational.32.1329.10.2355/isijinternational.32.1329 ↗
39. R. Bengochea, B. Lopez, and I. Gutierrez: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 417–26. https://doi.org/10.1007/s11661-998-0122-1.10.1007/s11661-998-0122-1 ↗
40. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–45. https://doi.org/10.2355/isijinternational.35.937.10.2355/isijinternational.35.937 ↗
41. P. Zhang, S.X. Li, and Z.F. Zhang: Mater. Sci. Eng. A., 2011, vol. 529, pp. 62–73. https://doi.org/10.1016/j.msea.2011.08.061.10.1016/j.msea.2011.08.061 ↗
42. A. DeArdo: Int. Mater. Rev., 2003, vol. 48, pp. 371–402. https://doi.org/10.1179/095066003225008833.10.1179/095066003225008833 ↗
43. A. Iza-Mendia and I. Gutierrez: Mater. Sci. Eng. A., 2013, vol. 561, pp. 40–51. https://doi.org/10.1016/j.msea.2012.10.012.10.1016/j.msea.2012.10.012 ↗
44. L. Sanz, B. Pereda, and B. Lopez: Mater. Sci. Eng. A., 2017, vol. 685, pp. 377–90. https://doi.org/10.1016/j.msea.2017.01.014.10.1016/j.msea.2017.01.014 ↗
45. T. Gladman, in The Physical Metallurgy of Microalloyed Steels, Chapter: Microstructure-Property Relationships, The Institute of Materials, London, 1997, pp. 42–45.
46. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mat. Sci. Eng. A., 2010, vol. 527, pp. 2738–46. https://doi.org/10.1016/j.msea.2010.01.004.10.1016/j.msea.2010.01.004 ↗
47. S.S. Campos, H.J. Kestenbach, and E.V. Morales: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 1245–8. https://doi.org/10.1007/s11661-001-0133-7.10.1007/s11661-001-0133-7 ↗
48. M.E. Bush and P.M. Kelly: Acta Metall., 1971, vol. 19, pp. 1363–71. https://doi.org/10.1016/0001-6160(71)90074-5.10.1016/0001-6160(71)90074-5 ↗
49. D.N. Hanlon, J. Sietsma, and S. van der Zwaag: ISIJ Int., 2001, vol. 41, pp. 1028–36. https://doi.org/10.2355/isijinternational.41.1028.10.2355/isijinternational.41.1028 ↗
50. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, pp. 197–206. https://doi.org/10.1179/mst.1987.3.3.197.10.1179/mst.1987.3.3.197 ↗
51. T. Gladman: Mater. Sci. Technol., 1999, vol. 15, pp. 30–6. https://doi.org/10.1179/026708399773002782.10.1179/026708399773002782 ↗