Defining the Role of Hot Band Annealing in High-Permeability Grain-Oriented (GO) Electrical Steel
Source abstract
Abstract
Pilot plant trials first established that prior hot band annealing (HBA) provided significant improvements to Goss {110}〈001〉 texture and magnetic properties of fully processed high-permeability (Hi-BTM) grain-orientated (GO) electrical steel. The mechanism(s) responsible for such improvements were then explored through laboratory trials on industrially produced hot band (HB) GO. In particular, simulated HBA was shown to generate recrystallized grains with ‘minor’ remnant plastic deformation, but slightly weaker Goss texture in the subsurface. HBA followed by the cold rolling, on the other hand, accelerated the primary recrystallization kinetics and enhanced the presence of through thickness Goss grains. These were related to the more grain interior strain localizations, which dominated post-HBA cold rolled GO microstructures. The most significant effect of the HBA, on the cold rolled plus primary recrystallized microstructure, appeared in the form of noticeably different grain boundary character distribution. Post-HBA cold rolled plus recrystallized Goss grains had a noticeably higher fraction of growth-favorable special boundaries with their immediate neighbor(s). It is hence proposed that a micro-growth advantage or selection, during the early stages of normal grain coarsening, brought out the growth advantage for Goss during the final secondary recrystallization of the HBA specimens.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-mechanical Processing of Metallic Materials, 1st ed. Elsevier, Oxford, 2007, pp. 429–42.
2. A.J. Moses: IEEE Proc., 1990, vol. 137, pp. 233–45.
3. G. Lyudkovsky, P.K. Rastogi, and M. Bala: J. Met., 1986, vol. 38, pp. 18–26.
4. N.P. Goss: US Patent 1965559, 1934.
5. N. Takahashi and J. Harase: Mater. Sci. Forum., 1996, vol. 204–206, pp. 143–54.10.4028/www.scientific.net/MSF.204-206.143 ↗
6. M. Matsuo: ISIJ int., 1989, vol. 29, pp. 809–27.10.2355/isijinternational.29.809 ↗
7. H. Kobayashi, K. Kuroki, M. Minakuchi, and K. Yakashiro: European Patent, EP 0339474 B1, 1988.
8. S. Fortunati, S. Cicale, and G. Abbruzzese: European Patent, EP0950118B1, 1996.
9. N. Takahashi, Y. Suga, and H. Kobayashi: J. Magn. Magn. Mater., 1996, vol. 160, pp. 98–101.10.1016/0304-8853(96)00126-6 ↗
10. T. Kubota, M. Fujikura, and Y. Ushigami: J. Magn. Magn. Mater., 2000, vol. 215–216, pp. 69–73.10.1016/S0304-8853(00)00069-X ↗
11. K. Günther, G. Abbruzzese, S. Fortunati, and G. Ligi: Steel Res. Int., 2005, vol. 76(6), pp. 413–21.10.1002/srin.200506030 ↗
12. S. Taguchi, and A. Sakakura: US patent 3159511, 1964.
13. S. Taguchi, A. Sakakura, and H. Takashima: US patent 3287183, 1966.
14. T. Fugakawa and H. Yashiki: ISIJ Int., 2000, vol. 40(4), pp. 402–08.10.2355/isijinternational.40.402 ↗
15. S.Y. Chang: Steel Res. Int., 2005, vol. 76, pp. 660–65.10.1002/srin.200506072 ↗
16. J.K. Kim, J.S. Woo, and S.K. Chang: JMMM, 2000, vol. 215–216, pp. 162–64.10.1016/S0304-8853(00)00103-7 ↗
17. B.D. Hong, K.S. Han, J.K. Kim, and K.M. Cho: Steel Res. Int., 2005, vol. 76(6), pp. 448–50.10.1002/srin.200506036 ↗
18. S.M. Shin, S. Birosca, S.K. Chang, and B.C. De Cooman: J. Microsc., 2008, vol. 230, pp. 414–23.10.1111/j.1365-2818.2008.02001.x ↗
19. F.J. Humphreys and H. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, 2012.
20. S.K. Giri, A. Durgaprasad, K. Thool, S. Kundu, and I. Samajdar: Mater. Sci. Technol., 2019, vol. 9, pp. 1095–106.10.1080/02670836.2019.1612594 ↗
21. S.K. Giri, A. Durgaprasad, H. Mehtani, S. Kundu, and I. Samajdar: Metall. Trans. A, 2020, vol. 51A, pp. 5268–84.10.1007/s11661-020-05920-z ↗
22. I. Samajdar, B. Verlinden, and P. Van Houtte: Acta Mater., 1998, vol. 46(8), pp. 2751–63.10.1016/S1359-6454(97)00466-7 ↗
23. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
24. S. Raveendra, A.K. Kanjarla, H. Paranjape, S.K. Mishra, S. Mishra, L. Delannay, I. Samajdar, and P. Van Houtte: Metall. Trans. A., 2011, vol. 42A, pp. 2113–24.10.1007/s11661-010-0580-0 ↗
25. J. Singh, S. Mahesh, and G. Kumar: Metall. Trans. A., 2015, vol. 46A, pp. 1927–47.10.1007/s11661-015-2807-6 ↗
26. P. van Houtte and L.D. Buyser: Acta Metall. Mater., 1993, vol. 41(2), pp. 323–36.10.1016/0956-7151(93)90063-X ↗
27. D. Mukherjee, U. Tewary, S. Kumar, S. Karagadde, R.K. Verma, M. Sambandam, and I. Samajdar: Mater. Sci. Technol., 2020, vol. 36(10), pp. 1020–36.10.1080/02670836.2020.1746537 ↗
28. I. Groma: Phys. Rev. B, 1998, vol. 57, pp. 7535–42.10.1103/PhysRevB.57.7535 ↗
29. A. Lodh, T. Nasir, A. Prakash, P.J. Guruprasad, S.M. Keralavarma, A.A. Benzerga, C. Hutchinson, and I. Samajdar: Met. Trans. A., 2019, vol. 50A, pp. 5038–55.10.1007/s11661-019-05421-8 ↗
30. M.H. Alvi, S.W. Cheong, J.P. Suni, H. Weiland, and A.D. Rollett: Acta Mater., 2008, vol. 56(13), pp. 3098–108.10.1016/j.actamat.2008.02.037 ↗
31. S. Raveendra, S. Mishra, K.V. Mani Krishna, H. Weiland, and I. Samajdar: Metall Mater. Trans. A, 2008, vol. 39A(11), pp. 2760–71.10.1007/s11661-008-9620-4 ↗
32. I. Samajdar, B. Verlinden, P. Van Houtte, and D. Vanderschueren: Scripta Mater., 1997, vol. 37(6), pp. 869–74.10.1016/S1359-6462(97)00185-1 ↗
33. W.C. Leslie, R.L. Rickett, C.P. Stroble, and G. Konoval: Tran. ASM, 1961, vol. 53, pp. 715–34.
34. Y. Iida, H. Shimizu, Y. Ito, and H. Simanaka: Tetsu-to-Hagane, 1981, vol. 67, p. S1217.
35. J. Harase, K. Takashima, Y. Matsumara, T. Haratani, T. Hayami, and H. Matsumara: Tetsu-to-Hagane, 1981, vol. 67, p. S1200.10.2355/tetsutohagane1955.67.8_1200 ↗
36. P. Van Houtte: Text. Microstruct., 1991, vol. 13, pp. 199–212.10.1155/TSM.13.199 ↗
37. M. Dahms: Text. Microstruct., 1993, vol. 21, pp. 61–69.10.1155/TSM.21.61 ↗
38. S. Cicalè, I. Samajdar, B. Verlinden, G. Abbruzzese, and P. Van Houtte: ISIJ Int., 2002, vol. 42(7), pp. 770–78.10.2355/isijinternational.42.770 ↗
39. R. Khatirkar, L.A.I. Kestens, R. Petrov, and I. Samajdar: ISIJ Int., 2009, vol. 49, pp. 78–85.10.2355/isijinternational.49.78 ↗
40. K. Ushioda and B. Hutchinson: ISIJ Int., 1989, vol. 29(10), pp. 862–67.10.2355/isijinternational.29.862 ↗
41. I. Samajdar, S. Cicale, B. Verlinden, P. Van Houtte, and G. Abbruzzesse: Scripta Mater., 1998, vol. 39(8), pp. 1083–89.10.1016/S1359-6462(98)00288-7 ↗
42. I. Samajdar, B. Verlinden, and L. Rabet: Mater. Sci. Eng., 1999, vol. A266, pp. 146–54.10.1016/S0921-5093(99)00022-2 ↗
43. P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay: Int. J. Plast., 2005, vol. 21, pp. 589–624.10.1016/j.ijplas.2004.04.011 ↗
44. R.K. Ray and J. Jonas: Int. Mater. Rev., 1990, vol. 35(1), pp. 1–36.10.1179/095066090790324046 ↗
45. J. Pospiecht, K. Sztwiertniat, and F. Haessner: Text. Microstruct., 1986, vol. 6, pp. 201–15.10.1155/TSM.6.201 ↗
46. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
47. Y. Inokuti and C. Maeda: Trans. ISIJ, 1984, vol. 24, pp. 655–62.10.2355/isijinternational1966.24.655 ↗
48. A.L. Etter, T. Baudin, and R. Penelle: Scripta Mater., 2002, vol. 47, pp. 725–30.10.1016/S1359-6462(02)00189-6 ↗
49. J. Harase, R. Shimizu, and N. Takahashi: Acta Metall. Mater., 1990, vol. 38(10), pp. 1849–56.10.1016/0956-7151(90)90296-S ↗
50. N. Chen, S. Zaefferer, and L. Lahn: Acta Mater., 2003, vol. 51, pp. 1755–65.10.1016/S1359-6454(02)00574-8 ↗
51. Y. Hayakawa: Sci. Technol. Adv. Mater., 2017, vol. 18(1), pp. 480–97.10.1080/14686996.2017.1341277 ↗
52. Y. Hayakawa and J.A. Szpunar: Acta Mater., 1997, vol. 3, pp. 1285–95.10.1016/S1359-6454(96)00251-0 ↗
53. I. Samajdar and R.D. Doherty: Acta Mater., 1998, vol. 46(9), pp. 3145–58.10.1016/S1359-6454(97)00492-8 ↗
54. W.B. Huthinson: Int. Mater. Rev., 1984, vol. 29, pp. 25–42.
55. I. Samajdar, B. Verlinden, L. Kestens, and P. Van Houtte: Acta Mater., 1999, vol. 47(1), pp. 55–65.10.1016/S1359-6454(98)00337-1 ↗
56. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng., 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
57. R.D. Doherty: Scripta Mater., 1985, vol. 19, pp. 927–30.10.1016/0036-9748(85)90284-4 ↗
58. B.J. Duggan, K. Lucke, G. Kuhloff, and C.S. Lee: Acta Metall. Mater., 1993, vol. 41(6), pp. 1921–27.10.1016/0956-7151(93)90211-A ↗
59. S.S. Ferrera de Dafe, S.D.C. Paolinelli, and A.B. Cota: JMMM, 2011, vol. 323, pp. 3234–38.10.1016/j.jmmm.2011.07.015 ↗
60. T. Haratani, W.B. Hutchinson, I.L. Dillamore, and P. Bate: Met. Sci., 1984, vol. 18, pp. 57–65.10.1179/030634584790420258 ↗
61. V.M. Nandedkar, I. Samajdar, and K. Narashiman: ISIJ Int., 2001, vol. 41(12), pp. 1517–23.10.2355/isijinternational.41.1517 ↗
62. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40(2), pp. 205–19.10.1016/0956-7151(92)90296-Q ↗