journal article·2022-04Open access

Synthesis and Characterization of an Fe/Co Ferrite Spinel Oxide Film Produced by Using N2/Steam Heat Treatment on Two Maraging Steels

Mauro Andres Cerra Florez, Gemma Fargas Ribas, Joan Josep Roa Rovira, Antonio Manuel Mateo García, Stephany Aparecida Santos da Mata, Enrique Rodríguez-Castellón, Marcelo José Gomes da Silva

Abstract

An experimental procedure was developed to obtain an oxide layer formed mainly by spinel on maraging steels. It consists of different stages with specific conditions, such as atmospheres rich in nitrogen and water vapor, and different steps of temperatures and times. Tests were performed on grade 300 and 350 maraging steels. Oxide layer characterization was done using optical and electron microscopy, spectroscopy, X-ray diffraction, and nanoscratch tests in order to determine the adhesion force as well as to observe the main deformation mechanism induced under sliding tests. In both steels, oxide layers are formed by the spinel’s Fe3O4 and CoFe2O4 in amounts close to ca. 85 pct, whereas TiO2 and MoO3 represent the other 15 pct. No hematite was found. The low oxygen availability during the heat treatment was fundamental for avoiding hematite formation. A nickel-rich austenitic phase formed at the metal-oxide interface due the kinetics of the oxidation process of the cobalt, iron, and molybdenum. The particular conditions of the heat treatments induced the formation of a mixture of iron, nickel, and cobalt spinel ferrites, thereby contradicting previous studies that said that only magnetite would be formed. The sliding tests at the nanometric length scale highlight that the layer formed on maraging 300 grade presents a better adhesion than the other investigated material due to the fact that it requires more load in order to induce cracks located at the edge of the sliding track and, subsequently, the chipping of the formed layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Magnetic Properties and Synthesis of Ferrites · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. A. Magnée, J.M. Drapier, J. Dumont, D. Coutsouradis, and L. Habraken: Cobalt Containing High Strength Steels, Centre d’Information du Cobalt, Brussels, 1974, p. 128, http://refhub.elsevier.com/S0360-3199(19)31930-5/sref1
2. M. Schmidt and K. Rohrbach: ASM Handbook, ASM International, Materials Park, OH, 1991, vol. 4, pp. 219–28, https://doi.org/10.31399/asm.hb.v04d.a000594810.31399/asm.hb.v04d.a0005948 ↗
3. H.J. Rack and D. Kalish: Metall. Trans., 1971, vol. 2, pp. 2011–20. https://doi.org/10.1007/BF02814948.10.1007/BF02814948 ↗
4. L.P.M. Santos, M. Bêres, I.N. Bastos, S.S.M. Tavares, H.F.G. Abreu, and M.J.G. Silva: Corros. Sci., 2015, vol. 101, pp. 12–18. https://doi.org/10.1016/j.corsci.2015.06.022.10.1016/j.corsci.2015.06.022 ↗
5. V. LimaFilho, I. Barrosa, and H. Gomes de Abreu: Mater. Res., 2017, vol. 20(1), pp. 10–14. https://doi.org/10.1590/1980-5373-mr-2016-0257.10.1590/1980-5373-mr-2016-0257 ↗
6. M. Masoumi, H.F.G. Abreu, L.F.G. Herculano, J.M. Pardal, S.S.M. Tavares, and M.J.G. Silva: Eng. Fail. Anal., 2019, vol. 104, pp. 379–87. https://doi.org/10.1016/j.engfailanal.2019.05.031.10.1016/j.engfailanal.2019.05.031 ↗
7. U.K. Viswanathan, G.K. Dey, and M.K. Asundi: Metall. Trans. A., 1993, vol. 24A, pp. 2429–42. https://doi.org/10.1007/BF02646522.10.1007/BF02646522 ↗
8. “18 Per Cent Nickel Maraging Steels: Engineering Properties.” Nickel Development Institute Report No. 4419, Nickel Institute, 1976, https://nickelinstitute.org/media/1598/18_nickelmaragingsteel_engineeringproperties_4419_.pdf
9. M.A. Cerra Florez, U.C. Pereira, J.L. Cardoso, F.J.S. Oliveira, W.S. Araújo, G.F. Ribas, H.F.G. De Abreu, and M.J.G. Da Silva: J. Fluor. Chem., 2021, vol. 243, p. 109738. https://doi.org/10.1016/j.jfluchem.2021.109738.10.1016/j.jfluchem.2021.109738 ↗
10. M.J.G. Silva, J.L. Cardoso, D.S. Carvalho, L.P.M. Santos, L.F.H. Herculano, H.F.G. Abreu, and J.M. Pardal: Int. J. Hydrog. Energy., 2019, vol. 44, pp. 18606–15. https://doi.org/10.1016/j.ijhydene.2019.05.074.10.1016/j.ijhydene.2019.05.074 ↗
11. A. Glaser: Sci. Glob. Secur., 2008, vol. 16, pp. 1–25. https://doi.org/10.1080/08929880802335998.10.1080/08929880802335998 ↗
12. I. Barzashka and I. Oelrich: Engineering Considerations for Gas Centrifuges, Federation of American Scientists, https://fas.org/programs/ssp/nukes/fuelcycle/centrifuges/engineering.html#14. Accessed 14 March 2020.
13. D.B. Bradhurst and P.M. Heuer: Corrosion., 1981, vol. 37(2), pp. 63–70. https://doi.org/10.5006/1.3593847.10.5006/1.3593847 ↗
14. I. Klein, J. Sharon, and A. Yaniv: Scripta Metall., 1981, vol. 15, pp. 141–44. https://doi.org/10.1007/BF00666721.10.1007/BF00666721 ↗
15. I. Klein, A. Yaniv, and J. Sharon: Oxid. Met., 1981, vol. 16, pp. 1–2. https://doi.org/10.1007/BF00603746.10.1007/BF00603746 ↗
16. I. Klein, A. Yaniv, and J. Sharon: Appl. Surf. Sci., 1983, vol. 14(3–4), pp. 351–58. https://doi.org/10.1016/0378-5963(83)90048-X.10.1016/0378-5963(83)90048-X ↗
17. J. Rezek, I. Klein, and J. Yahalom: Appl. Surf. Sci., 1997, vol. 108, pp. 159–65. https://doi.org/10.1016/S0169-4332(96)00587-9.10.1016/S0169-4332(96)00587-9 ↗
18. M.A.C. Florez, G. Fargasribas, J.J.R. Rovira, E. Vilarrassa-García, E. Rodríguez-Castellón, A.B.F. Souza, J.L. Cardoso, and M.J. Gomes da Silva: Metals., 2021, vol. 11(5), p. 746. https://doi.org/10.3390/met11050746.10.3390/met11050746 ↗
19. I. Horcas and R. Fernández: Rev. Sci. Instrum., 2007, vol. 78, p. 013705. https://doi.org/10.1063/1.2432410.10.1063/1.2432410 ↗
20. Y. Zhang, K. Cui, Q. Gao, S. Hussain, and Y. Lv: Surf. Coat. Technol., 2020, vol. 396, p. 125966. https://doi.org/10.1016/j.surfcoat.2020.125966.10.1016/j.surfcoat.2020.125966 ↗
21. U.C. Nwaogu, N.S. Tiedje, and H.N. Hansen: J. Mater. Process. Technol., 2013, vol. 213, pp. 59–68. https://doi.org/10.1016/j.jmatprotec.2012.08.008.10.1016/j.jmatprotec.2012.08.008 ↗
22. E.S. Gadelmawla, M.M. Koura, T.M.A. Maksoud, I.M. Elewa, and H.H. Soliman: J. Mater. Process. Technol., 2002, vol. 123, pp. 133–45. https://doi.org/10.1016/S0924-0136(02)00060-2.10.1016/S0924-0136(02)00060-2 ↗
23. F. Chung: J. Appl. Cryst., 1974, vol. 7, p. 519. https://doi.org/10.1107/S0021889874010375.10.1107/S0021889874010375 ↗
24. X. Zhou, D. Liu, H. Bu, L. Deng, H. Liu, P. Yuan, P. Du, and H. Song: Solid. Earth Sci., 2018, vol. 3, pp. 16–29. https://doi.org/10.1016/j.sesci.2017.12.002.10.1016/j.sesci.2017.12.002 ↗
25. N.F. Viana, N.C. Dos Santos, and H.F.G. De Abreu: J. Mater. Res. Technol., 2013, vol. 2, pp. 298–302. https://doi.org/10.1016/j.jmrt.2013.03.017.10.1016/j.jmrt.2013.03.017 ↗
26. F.F. Conde, J.D. Escobar, J.P. Oliveira, M. Béreš, A.L. Jardini, W.W. Bose, and J.A. Avila: Mater. Sci. Eng. A., 2019, vol. 758, pp. 192–201. https://doi.org/10.1016/j.msea.2019.03.129.10.1016/j.msea.2019.03.129 ↗
27. JCPDS: “X-ray Diffraction Data Cards of the Joint Committee on Powder Diffraction Standards,” International Center for Diffraction Data, Swarthmore, PA, 1975.
28. J. Dąbrowa, M. Stygar, A. Mikuła, A. Knapik, K. Mroczka, W. Tejchman, and M. Martin: Mater. Lett., 2018, vol. 216, pp. 32–36. https://doi.org/10.1016/j.matchar.2007.03.011.10.1016/j.matchar.2007.03.011 ↗
29. N. Zhao, H. Fan, M. Zhang, J. Ma, Z. Du, B. Yan, and H. Li: Chem. Eng. J., 2020, vol. 390, p. 124477. https://doi.org/10.1016/j.cej.2020.124477.10.1016/j.cej.2020.124477 ↗
30. C. Capurro and C. Cicutti: J. Mater. Res. Technol., 2018, vol. 7(3), pp. 342–49. https://doi.org/10.1016/j.jmrt.2018.04.010.10.1016/j.jmrt.2018.04.010 ↗
31. C.C. Silva, J.P. Farias, H.C. Miranda, R.F. Guimarães, J.W.A. Menezes, and A.M. Neto: Mater. Charact., 2008, vol. 59, pp. 528–33. https://doi.org/10.1016/j.matchar.2007.03.011.10.1016/j.matchar.2007.03.011 ↗
32. E.R. Petty: J. Appl. Cryst., 1970, vol. 4, pp. 402–03. https://doi.org/10.1107/S0021889871007349.10.1107/S0021889871007349 ↗
33. A.C. Rodrigues, H.H. Bernardi, and J. Otubo: J. Aerosp. Technol. Manag., 2014, vol. 6(4), pp. 389–94. https://doi.org/10.5028/jatm.v6i4.400.10.5028/jatm.v6i4.400 ↗
34. O. Moshka, M. Pinkas, E. Brosh, V. Ezersky, and L. Meshi: Mater. Sci. Eng. A., 2015, vol. 638, pp. 232–39. https://doi.org/10.1016/j.msea.2015.04.067.10.1016/j.msea.2015.04.067 ↗
35. P.R. Kumar, Y.H. Jung, K.K. Bharathi, C.H. Lim, and D.K. Kim: Electrochim. Acta., 2014, vol. 146, pp. 503–10. https://doi.org/10.1016/j.electacta.2014.09.081.10.1016/j.electacta.2014.09.081 ↗
36. M.R. Robinson, M. Abdelmoula, M. Mallet, and R. Coustel: J. Solid State Chem., 2019, vol. 277, pp. 587–93. https://doi.org/10.1016/j.jssc.2019.06.033.10.1016/j.jssc.2019.06.033 ↗
37. W. Wang, Z. Ding, and X. Zhao: J. Appl. Phys., 2015, vol. 117, p. 17A328. https://doi.org/10.1063/1.4917463.10.1063/1.4917463 ↗
38. K.L. Routray, S. Saha, and D. Behera: Mater. Sci. Eng. B., 2020, vol. 257, p. 114548. https://doi.org/10.1016/j.mseb.2020.114548.10.1016/j.mseb.2020.114548 ↗
39. J. De La Figuera, A. Quesada, L. Martín-García, M. Sanz, M. Oujja, E. Rebollar, M. Castillejo, P. Prieto, A. Muñoz-Martín, L. Aballe, and J.F. Marco: Appl. Surf. Sci., 2015, vol. 359, pp. 480–85. https://doi.org/10.1016/j.apsusc.2015.10.104.10.1016/j.apsusc.2015.10.104 ↗
40. F. Genuzio, A. Sala, Th. Schmidt, D. Menzel, and H.-J. Freund: Surf. Sci., 2016, vol. 648, pp. 177–87. https://doi.org/10.1016/j.susc.2015.11.016.10.1016/j.susc.2015.11.016 ↗
41. R. Subbaraman, S.A. Deshmukh, and S.K. Sankaranarayanan: J. Phys. Chem. C., 2013, vol. 117, pp. 5195–5207. https://doi.org/10.1021/jp312514m.10.1021/jp312514m ↗
42. X. Zhang, S. Yang, Z. Yang, and X. Xu: J. Appl. Phys., 2016, vol. 120, p. 085313. https://doi.org/10.1063/1.4961607.10.1063/1.4961607 ↗
43. P. Kaspar, D. Sobola, R. Dallaev, S. Ramazanov, A. Nebojsa, S. Rezaee, and L. Grmela: Appl. Surf. Sci., 2019, vol. 493, pp. 673–78. https://doi.org/10.1016/j.apsusc.2019.07.058.10.1016/j.apsusc.2019.07.058 ↗
44. D. Barreca, G.A. Battiston, D. Berto, R. Gerbasi, and E. Tondello: Surf. Sci. Spectra., 2001, vol. 8, p. 240. https://doi.org/10.1116/11.20020302.10.1116/11.20020302 ↗
45. A. Galtayries, R. Sporken, J. Riga, G. Blanchard, and R. Caudano: J. Electron Spectrosc., 1998, vol. 88, pp. 951–56. https://doi.org/10.1016/S0368-2048(97)00134-5.10.1016/S0368-2048(97)00134-5 ↗
46. T.L. Barr: J. Phys. Chem., 1978, vol. 82, pp. 1801–10. https://doi.org/10.1021/j100505a006.10.1021/j100505a006 ↗
47. A.P. Grosvenor, B.A. Kobe, M.C. Biesinger, and N.S. McIntyre: Surf. Interface Anal., 2004, vol. 36, pp. 1564–74. https://doi.org/10.1002/sia.1984.10.1002/sia.1984 ↗
48. T.C. Lin, G. Seshadri, and J.A. Kelber: Appl. Surf. Sci., 1997, vol. 119, pp. 83–92. https://doi.org/10.1016/S0169-4332(97)00167-0.10.1016/S0169-4332(97)00167-0 ↗
49. R. Sanchis, D. Alonso-Domínguez, A. Dejoz, M.P. Picom, I. Álvarez-Serrano, T. García, M.L. López, and B. Solsona: Materials., 2018, vol. 11, p. 1387. https://doi.org/10.3390/ma11081387.10.3390/ma11081387 ↗
50. L. Lu, Z. Ai, J. Li, Z. Zheng, Q. Li, and L. Zhang: Cryst. Growth Des., 2007, vol. 7, pp. 459–64. https://doi.org/10.1021/cg060633a.10.1021/cg060633a ↗
51. T. Zhang, Z. Li, L. Wang, Z. Zhang, and S. Wang: Int. J. Hydrog. Energy., 2019, vol. 44, pp. 1610–19. https://doi.org/10.1016/j.ijhydene.2018.11.120.10.1016/j.ijhydene.2018.11.120 ↗
52. W. Yan, X. Cao, J. Tian, C. Jin, K. Ke, and R. Yang: Carbon., 2016, vol. 99, pp. 195–202. https://doi.org/10.1016/j.carbon.2015.12.011.10.1016/j.carbon.2015.12.011 ↗
53. W. Yan, W. Bian, C. Jin, J.H. Tian, and R. Yang: Electrochim. Acta., 2015, vol. 177, pp. 65–72. https://doi.org/10.1016/j.electacta.2015.02.044.10.1016/j.electacta.2015.02.044 ↗
54. Y. Zhao, G. Nie, X. Ma, P. Xu, and X. Zhao: Environ. Pollut., 2019, vol. 249, pp. 868–77. https://doi.org/10.1016/j.envpol.2019.03.103.10.1016/j.envpol.2019.03.103 ↗
55. M. Fantauzzi, F. Secci, M.S. Angotzi, C. Passiu, C. Cannas, and A. Rossi: RSC Adv., 2019, vol. 9, pp. 19171–79. https://doi.org/10.1039/c9ra03488a.10.1039/c9ra03488a ↗
56. G.B. Ji, S.L. Tang, S.K. Ren, F.M. Zhang, B.X. Gu, and Y.W. Du: J. Cryst. Growth., 2004, vol. 270, pp. 156–61. https://doi.org/10.1016/j.jcrysgro.2004.06.025.10.1016/j.jcrysgro.2004.06.025 ↗
57. K. Tsukimura, S. Sasaki, and N. Kimizuka: Jpn. J. Appl. Phys., 1997, vol. 36, p. 3609. https://doi.org/10.1143/JJAP.36.3609.10.1143/JJAP.36.3609 ↗
58. A.P.G. Rodrigues, D.K.S. Gomes, J.H. Araújo, D.M.A. Melo, N.A.S. Oliveira, and R.M. Braga: J. Magn. Magn. Mater., 2015, vol. 374, pp. 748–54. https://doi.org/10.1016/j.jmmm.2014.09.045.10.1016/j.jmmm.2014.09.045 ↗
59. R. Bliem, J. Pavelec, O. Gamba, E. McDermott, Z. Wang, S. Gerhold, M. Wagner, J. Osiecki, K. Schulte, M. Schmid, P. Blaha, U. Diebold, and G.S. Parkinson: Phys. Rev. B., 2015, vol. 92, p. 75440. https://doi.org/10.1103/PhysRevB.92.075440.10.1103/PhysRevB.92.075440 ↗
60. M. Pardavi-Horvath: J. Magn. Magn. Mater., 2000, vol. 171–183, pp. 215–56. https://doi.org/10.1016/S0304-8853(00)00106-2.10.1016/S0304-8853(00)00106-2 ↗
61. P.L. Surman: Corros. Sci., 1973, vol. 13, pp. 113–24. https://doi.org/10.1016/0010-938X(73)90023-1.10.1016/0010-938X(73)90023-1 ↗
62. D.W. Luo and Z.S. Shen: Acta Metall. Sin., 2008, vol. 21, pp. 409–18. https://doi.org/10.1016/S1006-7191(09)60003-X.10.1016/S1006-7191(09)60003-X ↗
63. B. Jeon, Q. Van Overmeere, A.C. Van Duin, and S. Ramanthan: Phys. Chem. Chem. Phys., 2013, vol. 15, pp. 1821–30. https://doi.org/10.1039/C2CP43490C.10.1039/C2CP43490C ↗
64. C. Greyling, A. Kotzi, and P. Viljoen: Surf. Interface Anal., 1990, vol. 16, pp. 293–98. https://doi.org/10.1002/sia.740160161.10.1002/sia.740160161 ↗
65. H. Hong, N.K. Memon, Z. Dong, B.H. Kear, and S. Tse: Proc. Combust. Inst., 2019, vol. 37, pp. 1249–56. https://doi.org/10.1016/j.proci.2018.06.098.10.1016/j.proci.2018.06.098 ↗
66. F. Genuzio, A. Sala, T. Schmidt, D. Menzel, and H.-J. Freund: J. Phys. Chem. C., 2014, vol. 118, pp. 29068–76. https://doi.org/10.1021/jp504020a.10.1021/jp504020a ↗