Cavitation During Creep Deformation in AA7075-T76: Cellular Automata Simulation and Experiments
Source abstract
Abstract
In this work, cavitation during creep in AA7075-T76 was simulated employing a probabilistic cellular automata scheme. Two-dimensional cellular automata coupled with the governing equations for cavity growth were utilized to define the size and distribution of cavities during creep. Both diffusion and strain-controlled mechanisms were taken into account while the first and second neighboring cells were considered for determination of the cavity growth as well as to generate the initial microstructure. Moreover, uni-axial creep experiments on AA7075-T76 were carried out under different temperatures and applied stresses including 170 MPa at 150 °C and 150 MPa at 160 °C. The microstructural changes during creep were detected, and formation and growth of cavities were evaluated after different creep durations. Accordingly, microstructural evolution including optical metallography and scanning electron microscopy were performed to characterize the microstructural changes and the size of the cavities. The achieved results were then employed to determine the material constants as well as to validate the simulation results. A reasonable agreement was found between the simulation and the experimental data, which shows that the proposed model can be used under real conditions while the impact of significant aspects including the coalescence of the cavities can be properly considered by the model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. [1] M.R. Rokni, A. Zarei-Hanzaki, A.A. Roostaei and H.R. Abedi: Mater. Des., 2011, vol. 32, pp. 2339-2344.10.1016/j.matdes.2010.12.047 ↗
2. [2] G.Z. Quan, Y.P. Mao, G.S. Li, W.Q. Lv, Y. Wang and J. Zhou: Comput. Mater. Sci., 2012, vol. 55, pp. 65-72.10.1016/j.commatsci.2011.11.031 ↗
3. G. Fribourg, Y. Brechet, J.L. Chemin and A. Deschamps: Metall. Mater. Trans. A, 2011, 42A, 3934-3940.10.1007/s11661-011-0786-9 ↗
4. [4] Y.C. Lin, Y.Q. Jiang, H.M. Zhou and G. Liu: J. Mater. Eng. Perform., 2014, vol. 23, pp. 4350-4357.10.1007/s11665-014-1191-5 ↗
5. [5] L.T. Li, Y.C. Lin, H.M. Zhou and Y.Q. Jiang: Comput. Mater. Sci., 2013, vol. 73, pp. 72-78.10.1016/j.commatsci.2013.02.022 ↗
6. [6] N. Mahathaninwong, Y. Zhou, S.E. Babcock, T. Plookphol, J. Wannasin and S. Wisutmethangoon: Mater. Sci. Eng. A, 2012, vol. 556, pp. 107-113.10.1016/j.msea.2012.06.064 ↗
7. [7] A. Das, N. Roy and A. Ray: Mater. Sci. Eng. A, 2014, vol. 598, pp. 28-33.10.1016/j.msea.2013.12.097 ↗
8. [8] Y.C. Lin, Y.Q. Jiang, X.M. Chen, D.X. Wen and H.M. Zhou: Mater. Sci. Eng. A, 2013, vol. 588, pp. 347-356.10.1016/j.msea.2013.09.045 ↗
9. [9] R.A. Jeshvaghani, H.R. Shahverdi, and S.M.M. Hadavi: Mater. Sci. Eng. A, 2012, vol. 552, pp. 172-178.10.1016/j.msea.2012.05.027 ↗
10. [10] F. Shahriyari, M.H. Shaeri, F. Bavarsiha and M.T. Noghani: Mater. Sci. Eng. A, 2019, vol. 765, pp. 138225.10.1016/j.msea.2019.138225 ↗
11. M.M. Mostafa, G.S. Al-Ganainy, A.M. AbdEl-Khalek and R.H. Nada: Physica B, 2003, 336, 402-409.10.1016/S0921-4526(03)00318-1 ↗
12. [12] L.C. Lim: Acta Metall., 1987, vol. 35, pp. 1663-1673.10.1016/0001-6160(87)90114-3 ↗
13. [13] Z. Tong, J. Jiao, W. Zhou, Y. Yang, L. Chen, H. Liu, Y. Sun and X. Ren: Surf. Coat. Technol., 2019, vol. 377, pp. 124799.10.1016/j.surfcoat.2019.07.023 ↗
14. [14] M. F. Ashby and D.R.H. Jones: Engineering materials 1: an introduction to properties, applications and design, 5th ed., Elsevier, Oxford, 2012, pp.351-366.10.1016/B978-0-08-096665-6.00023-4 ↗
15. [15] E. Vaghefi and S. Serajzadeh: Met.Mater. Int., 2020, DOI: https://doi.org/10.1007/s12540-020-00755-0.10.1007/s12540-020-00755-0 ↗
16. [16] J. Llorca, A. Needleman and S. Suresh: Acta Metal. Mater., 1991, vol. 39, pp. 2317-2335.10.1016/0956-7151(91)90014-R ↗
17. [17] A.C.F. Cocks and M.F. Ashby: Mater. Sci., 1982, vol. 21, pp. 189-244.
18. [18] J. He and R.Sandstrom: Procedia Structural Integrity, 2016, vol. 2, pp. 863-870.
19. [19] E. Maire, O. Bouaziz, M. Di Michiel and C. Verdu: Acta Mater., 2008, vol. 56, pp. 4954-4964.10.1016/j.actamat.2008.06.015 ↗
20. [20] Q. Zhang, W. Zhang and Y. Liu: Mater. Sci. Eng. A, 2015, vol. 628, pp. 340-349.10.1016/j.msea.2015.01.032 ↗
21. [21] R. Kumar, J. Villanova, P. Lhuissier and L. Salvo: Acta Mater., 2019, vol. 166, pp. 18-27.10.1016/j.actamat.2018.12.020 ↗
22. [22] Q. Xu, X. Yang and Z. Lu: Mater. High Temp., 2017, vol. 34, pp. 323-332.10.1080/09603409.2017.1388603 ↗
23. [23] X. Zheng, Q. Xu, Z. Lu, X. Wang and X.Q. Feng: Mater. High Temp., 2020, vol. 37, pp. 129-138.10.1080/09603409.2020.1716145 ↗
24. Q. Xu and Z. Lu: Strength Mater., 2019, 11: 373-409, https://doi.org/10.5772/intechopen.89009.10.5772/intechopen.89009 ↗
25. [25] D. Raabe: Annu. Rev. Mater. Res., 2002, vol. 32, pp. 53-76.10.1146/annurev.matsci.32.090601.152855 ↗
26. [26] K. Nowak: Key Eng. Mater., 2012, vol. 488-489, pp. 339-342.
27. [27] K. Nowak: Int. J. Damage Mech., 2019, vol. 29, pp. 780-797.10.1177/1056789519883668 ↗
28. [28] G.S. Dahen: Acta Mater., 2001. vol. 49, pp. 2017-2026.10.1016/S1359-6454(01)00089-1 ↗
29. [29] K. Kremeyer: J. Comput. Phys., 1998, vol. 142, pp. 243-263.10.1006/jcph.1998.5926 ↗
30. [30] Y.J. Lan, D.Z. Li and Y.Y. Li: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 119-129.10.1007/s11663-006-0091-y ↗
31. [31] A.F. Whitehouse and T.W. Clyne: Acta Metall. Mater., 1993, vol. 41, pp. 1701-1711.10.1016/0956-7151(93)90189-Y ↗
32. [32] R. Raj and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 653-666.10.1016/0001-6160(75)90047-4 ↗
33. [33] E. Kassner and T.A. Hayes: Int. J. Plast., 2003, vol. 19, pp. 1715-1748.10.1016/S0749-6419(02)00111-0 ↗
34. [34] J.W. Hancock: Met. Sci., 1976, vol. 10, pp. 319-325.10.1179/msc.1976.10.9.319 ↗
35. [35] S. Li, S. Jin and Z. Huang: Met., 2018, vol. 8, pp. 1065.
36. [36] H. Iwasaki, M. Mabuchi and K. Higashi: Acta Mater., 2001, vol. 49, pp. 2269-2275.10.1016/S1359-6454(01)00124-0 ↗
37. [37] M. Abo-Elkhier and M.S. Soliman: J. Mater. Eng. and Perform., 2006, vol. 15, pp. 76-80.10.1361/105994906X83394 ↗
38. [38] C.C. Kammerer, N.S. Kulkarni, R.J. Warmack and Y.H. Sohn: J. Alloys Compd., 2014, vol. 617, pp. 968-974.10.1016/j.jallcom.2014.07.193 ↗
39. [39] A. Rudawska: J. Adhes. Sci. Technol., 2012, vol. 26, pp. 1233-1247.10.1163/156856111X593577 ↗