journal article·2020-02

Growth and Properties of TiN/Al2O3/Ti(C, N)/TiN Multilayer CVD Coatings on Ti (C, N)-Based Cermet Substrates with Ni, Co and Fe Binders

Junbo Liu, Ji Xiong, Zhixing Guo, Chengtao Qin, Ya Xiao, Qianbing You

Publisher page

Abstract

In this article, Ti (C, N)-based cermets with Ni, Co and Fe binder phase were manufactured by traditional powder metallurgical techniques. The multilayer TiN/Al2O3/Ti (C, N)/TiN CVD (chemical vapor deposition) coatings were deposited on the three kind of cermets, and the growth and properties of the coatings were studied. The results show that massive cores-incomplete rims are found in the cermet-Ni (cermets with Ni binder) and cermet-Fe (cermets with Fe binder), while in the cermet-Co (cermets with Co binder), the small black cores are surrounded by a complete and well-developed rim phase. When the TiN coating is deposited on the cermets with cores-incomplete rims, the Ti and N atoms stack on the face-centered cubic structure of Ti (C, N) first, and epitaxial growth of the TiN crystals takes place. The epitaxial growth is attributed to the same preferred orientation (2 0 0) of the TiN layers to the Ti (C, N) of the substrate. While on the cermets with cores-complete rims, (Mo, Ti) (C, N) solid solution and binder phase (Ni/Co/Fe), which has a distinct crystal structure or lattice parameters, TiN grains nucleate first and then grow. In this case, the TiN coatings show a (1 1 1)-oriented structure. Dense and thin coatings grow on the cermets-Co. The adhesion of the multilayer coatings to the substrate increases in the order cermets-Fe, cermets-Ni and cermets-Co. In addition, the coating on the cermets-Co has the lowest COF (coefficient of friction) as the thin TiN layer (0.7 μm) is propitious to diffusion of Al and O, and a protective transfer layer is formed by AlOx.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. C. Park, J. Kim, S. Kang, J. Alloys Compd. 2018, vol. 766, pp. 564-571.10.1016/j.jallcom.2018.06.367 ↗
2. H. Chien, M.C. Gao, H.M. Miller, G.S. Rohrer, Z. Ban, P. Prichard, Y. Liu, Int. J. Refract. Met. Hard Mater. 2009, vol. 27, pp. 458–464.10.1016/j.ijrmhm.2008.09.010 ↗
3. [3]Y.S. Tian, C.Z. Chen, S.T. Li, Q.H. Huo, Appl. Surf. Sci. 2005, vol. 242, pp. 177–184.10.1016/j.apsusc.2004.08.011 ↗
4. [4]D.M. Devia, E.R. Parra, P.J. Arango, Appl. Surf. Sci. 2011, vol. 258, pp. 1164–1174.10.1016/j.apsusc.2011.09.061 ↗
5. X.M. Li, Y. Han, Appl. Surf. Sci. 2008, vol. 254, pp. 6350–6357.10.1016/j.apsusc.2008.03.172 ↗
6. S. Ruppi, Int. J. Refract. Metals Hard Mater. 2005, vol. 23, pp. 306–316.10.1016/j.ijrmhm.2005.05.004 ↗
7. S. Acharya, M. Debata, T.S. Acharya, P.P. Acharya, S.K. Singh, J. Alloys Compd. 2016, vol. 685, pp. 905-912.10.1016/j.jallcom.2016.06.122 ↗
8. M. Chen, Q. Zhuang, N. Lin, Y.H. He, J. Alloys Compd. 2017, vol. 701, pp. 408-415.10.1016/j.jallcom.2017.01.119 ↗
9. M.K. Lee, J.H. Kim, J. Alloys Compd. 2017, vol. 698, pp. 39-43.10.1016/j.jallcom.2016.12.138 ↗
10. H Yu, Y Liu, Y Jin, J Ye, Int. J.Refract. Met. Hard Mater. 2011, vol. 29, pp. 586-590.10.1016/j.ijrmhm.2011.03.013 ↗
11. P. Alvaredo, C. Abajo, S.A. Tsipas, E. Gordo, J. Alloys Compd. 2014, vol. 591, pp. 72-79.10.1016/j.jallcom.2013.12.009 ↗
12. J.M. Córdoba, E. Chicardi, F.J. Gotor, J. Alloys Comp. 2013, vol. 559, pp. 34–38.10.1016/j.jallcom.2013.01.046 ↗
13. A. Demoly, W. Lengauer, C. Veitsch, K. Rabitsch, Int. J. Refract. Met. Hard Mater. 2011, vol. 29, pp. 716–723.10.1016/j.ijrmhm.2011.05.007 ↗
14. Q.Q. Yang, W.H. Xiong, M. Zhang, B. Huang, S. Chen, J. Alloys Comp. 2015, vol. 636, pp. 270–274.10.1016/j.jallcom.2014.11.236 ↗
15. E. Chicardi, Y. Torres, M.J. Sayagues, V. Medri, C. Melandri, J.M. Cordoba, F.J. Gotor, Chem. Eng. J. 2015, vol. 267, pp. 297–305.10.1016/j.cej.2015.01.022 ↗
16. M. Naidoo, O. Johnson, I. Sigalas, M. Herrmann, Int. J. Refract. Met. Hard Mater. 2014, vol. 42, pp. 97–102.10.1016/j.ijrmhm.2013.08.008 ↗
17. S.G. Huang, L. Li, O. Vander-Biest, J. Vleugels, J. Alloys Compd. 2008, vol. 464, pp. 205-211.10.1016/j.jallcom.2007.10.038 ↗
18. Q.Z. Xu, X. Ai, J. Zhao, F. Gong, J.M. Pang, Y.T. Wang, J. Alloy Compd. 2015, vol. 644, pp. 633-672.
19. L.V. Fieandt, M. Fallqvist, T. Larsson, E. Lindahl, M. Boman, Tribol, Int. 2018, vol. 119, pp. 593-599.10.1016/j.triboint.2017.11.040 ↗
20. L. von Fieandt, K. Johansson, T. Larsson, M. Boman, E. Lindahl, Thin Solid Film 2018, vol. 645, pp. 19-26.10.1016/j.tsf.2017.10.037 ↗
21. H. Du, J. Xiong, H.B. Zhao, Y.M. Wu, W.C. Wan, L.L. Wang, Appl. Surf. Sci. 2014, vol. 292, pp. 699-694.
22. S. Sveen, J.M. Andersson, R. M. Saoubi, M. Olsson, Wear. 2013, vol. 308, pp. 133–141.10.1016/j.wear.2013.08.025 ↗