journal article·2019-08-15

Simulation Analysis on Martempering in Salt Bath Technology for Carburized Distortion Sample

Xin Wang, Baokui Li, Min Gu

Publisher page

Abstract

An analysis model of the martempering in salt bath technology (MISBT) is established, which incorporates temperature field, phase transformation kinetics, and a strain field. The heat transfer coefficient is estimated by the inverse heat transfer method for the calculation of temperature. The effect of carbon content on the martensite transformation is then determined. On the strain calculation, the interaction between the thermal and the phase transformation strain is considered. Then the model is applied to the C-shaped carburized distortion sample for the 17CrNiMo6 steel by DEFORM. The temperature and martensitic transformation results of the MISBT are quantitatively analyzed and calculated. In contrast to the oil-quenching process (OQP), the smaller thermal stress of the MISBT is a result of the smaller temperature difference between the surface and the core. The lower transformation stress of the MISBT is a result of the slow cooling rate below 400 °C and the martensitic grade transformation. Therefore, the stress and distortion of the MISBT is less than that of the OQP, and the distortion results are consistent with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. ZC Li, BL Ferguson (2011) J Univ, 16(2):152-15610.1007/s12204-011-1117-4 ↗
2. HL Kyung, H Jeongho, SK Gyeong, DY Sang, Y-K Lee (2015) J Korean Soc Heat Treat, 28(6) 300-309.10.12656/jksht.2015.28.6.300 ↗
3. G.P. Dubal: International Quenching & Control of Distortion Conference American Society for Metals, Chicago, IL, February 2012.
4. S. Raygan, J. Rassizadehghani, and M. Askar: J. Mater. Eng. Perform., 2009, vol.18, no. 2, pp. 168-73.10.1007/s11665-008-9273-x ↗
5. X. Gu,L. Lü,and J. Liu: Heat Treatment Met., 2017, vol. 42, no. 5, pp. 184-8.
6. G.Q. Chao and G.P. Hua: Heat Treatment Technol. Equip., 2010, vol. 25, no. 5, pp. 48-51.
7. J. Gu, J. Wang, and J. Pan: Mater. Perform. Characterization, 2012, vol. 1, no. 1, pp. 1-16.
8. A. Sugianto, M. Narazaki, and M. Kogawara: J. Mater. Eng. Perform., 2010, vol. 19, no. 2, pp. 194-206.10.1007/s11665-009-9476-9 ↗
9. S.H. Kang and Y.T. Im: J. Mater. Process. Technol., 2007, vol. 183, no. 2, pp. 241-8.10.1016/j.jmatprotec.2006.10.018 ↗
10. D.W. Kim, Y.G. Cho, and H.H. Cho: Met. Mater. Int., 2011, vol. 17, no. 6, pp. 885-90.10.1007/s12540-011-6004-x ↗
11. T. Inoue, K. Funatani, and G.E. ToRen: in Proc. 1st Int. Conf. Thermal Process Modeling and Computer Simulation, Shanghai, P.R. China, 2000.
12. C.L. Magee: ASM International, Metals Park, OH, 1970, pp. 115–16.
13. M. Nushen: Recent Researches in Metallurgical Engineering-Form Extraction to Forming, IOP Publishing PhysicsWeb, 2012, www.intechopen.com. Accessed 12 September 2012.10.5772/2362 ↗
14. A. Sugianto, M. Narazaki, A. Kogawara, S.Y. Shirayori, and K. Satoshi: J. Mater. Process. Technol., 2009, vol. 209, no. 7, pp. 3597-609.10.1016/j.jmatprotec.2008.08.017 ↗