journal article·2019-02-15Open access

Thermal Stability of Rolled Metastable Austenitic Stainless Steel 1.4307 Studied Using Positron Annihilation

E. Dryzek, M. Sarnek, M. Wróbel

Abstract

Abstract Positron annihilation spectroscopy (PAS) was used in the study of cumulative isochronal and isothermal annealing of rolled 1.4307 (EN) stainless steel (SS). Due to different rolling temperatures, the SS samples varied in the α′-martensite volume fraction from 0.09 to 0.91. The measurements of positron annihilation characteristics, i.e., Doppler broadening (DB) of the annihilation line, showed a gradual annealing of vacancies in the temperature range between 200 °C and 400 °C, which indicated the first stage of recovery. This first stage of recovery did not change the microhardness. In the temperature range from 475 °C to 600 °C, a decrease in the microhardness and generation of new open volume defects accompanying the reversion of α′-martensite to austenite was observed. The amount of these defects correlated with the initial α′-martensite volume fraction. Their formation could be related to the volume contraction occurring during bcc/fcc transformation. The different chemical surroundings suggested that the positron trapping defects were associated with the metal carbide precipitates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Muon and positron interactions and applications · Copper Interconnects and Reliability · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. R. Fawley, M.A. Quader, and R.A. Dodd: Trans. TMS-AIME, 1968, vol. 242, pp. 771–76.
2. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–51.10.1007/BF02641927 ↗
3. P.L. Mangonon, Jr. and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577–86.10.1007/BF02642003 ↗
4. V. Seetharaman and R. Krishnan: J. Mater. Sci., 1981, vol. 16, pp. 523–30.10.1007/BF00738646 ↗
5. J. Singh: J. Mater. Sci., 1985, vol. 20, pp. 3157–66.10.1007/BF00545181 ↗
6. A.F. Padilha, R.L. Plaut, and P.R. Rios: ISIJ Int., 2003, vol. 43, pp. 135–43.10.2355/isijinternational.43.135 ↗
7. R Krause-Rehberg and HS Leipner: Solid-State Sciences, Springer, Berlin 1999, vol. 127.
8. E. Dryzek, M. Sarnek, and K. Siemek: Nukleonika, 2013, vol. 58, pp. 213–17.
9. E. Dryzek and M. Sarnek: Acta Phys. Polon. A, 2014, vol. 125, pp. 710–13.10.12693/APhysPolA.125.710 ↗
10. E. Dryzek, M. Sarnek, and M. Wróbel: J. Mater. Sci., 2014, vol. 49, pp. 8449–58.10.1007/s10853-014-8555-y ↗
11. S HariBabu, G Amarendra, R Rajaraman, CS Sundar: (2013) J. Phys.: Conf. Ser. 443:012010.
12. A.S. Lima and A.M. Nascimento: J. Mater. Sci., 2005, vol. 40, pp. 139–44.10.1007/s10853-005-5699-9 ↗
13. M. Shirdel, H. Mirzadeh, and M.H. Parsa: Mater. Sci. Eng. A, 2015, vol. 624, pp. 256–60.10.1016/j.msea.2014.11.087 ↗
14. ISO 4545:1:2017: “Metallic Materials –Knoop Hardness Test – Part 1: Test Method.”
15. http://www.ifj.edu.pl/private/jdryzek/page_r18.html. Accessed Feb. 20, 2018.
16. J. Kansy: Nucl. Instr. Meth. A, 1996, vol. 374, pp. 235–44.10.1016/0168-9002(96)00075-7 ↗
17. J. Dryzek, C. Wesseling, E. Dryzek, and B. Cleff: Mater. Lett., 1994, vol. 21, pp. 209–14.10.1016/0167-577X(94)90220-8 ↗
18. U. Holzwarth, A. Barbieri, S. Hansen-Ilzhöfer, P. Schaaff, and M. Haaks: Appl. Phys. A, 2001, vol. 73, pp. 467–75.10.1007/s003390100781 ↗
19. A. Yabuuchi, M. Maekawa, and A. Kawasuso: J. Nucl. Mater., 2011, vol. 419, pp. 9–14.10.1016/j.jnucmat.2011.08.012 ↗
20. M.F. McGuire: Stainless Steels for Design Engineers, ASM International, Materials Park, OH, 2008.10.31399/asm.tb.ssde.9781627082860 ↗
21. L.F.M. Martins, R.L. Plaut, and A.F. Padilha: ISIJ Int., 1998, vol. 38, pp. 572–79.10.2355/isijinternational.38.572 ↗
22. G. Cios, T. Tokarski, A. Żywczak, R. Dziurka, M. Stępień, Ł. Gondek, M. Marciszko, B. Pawłowski, K. Wieczerzak, and P. Bała: Metall. Mater. Trans. A, 2018, vol. 48A, pp. 4999–5008.
23. C.G. Schmidt, R.D. Caligiuri, L.E. Eiselstein, S.S. Wing, and D. Cubicciotti: Metall. Trans. A, 1987, vol. 18A, pp. 1483–93.10.1007/BF02646660 ↗
24. F Gauzzi, R Montanari, G Principi, ME Tata (2006) Mater. Sci. Eng. A, 438–440:202–06.10.1016/j.msea.2006.02.116 ↗
25. S.S.M. Tavares, D. Fruchart, and S. Miraglia: J. Alloys Compd., 2000, vol. 307, pp. 311–17.10.1016/S0925-8388(00)00874-4 ↗
26. J Arunkumar, S Abhaya, R Rajaraman, G Amarendra, KGM Nair, CS Sundar, R Baldev(2009) J. Nucl. Mater. 384:245–48.10.1016/j.jnucmat.2008.11.014 ↗
27. R. Rajaraman, G. Amarendra, and C.S. Sundar: Phys. Status Solidi C, 2009, vol. 6, pp. 2285–90.10.1002/pssc.200982112 ↗
28. E.A. Trillo, R. Beltran, J.G. Maldonado, R.J. Romero, L.E. Murr, W.W. Fisher, and A.H. Advani: Mater. Charact., 1995 vol. 35, pp. 99–112.10.1016/1044-5803(95)00072-0 ↗
29. Y.J. Oh and J.H. Hong: J. Nucl. Mater., 2000, vol. 278, pp. 242–50.10.1016/S0022-3115(99)00255-X ↗