journal article·2017-10

Enhanced Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt-Spinning Technique

Sultan Öztürk, Kürşat İcin, Bülent Öztürk, Uğur Topal, Hülya Kaftelen Odabaşı, Metin Göbülük, Ömer Necati Cora

Publisher page

Abstract

Rapidly solidified Nd15Fe77B8 alloy powders were produced by means of melt-spinning method in high-vacuum atmosphere to achieve improved magnetic and thermal properties. To this goal, a vacuum milling apparatus was designed and constructed to ball-mill the melt-spun powders in a surfactant active atmosphere. Various milling times were experimented to reveal the effect of the milling time on the mean particle size and other size-dependent properties such as magnetism and Curie temperature. Grain structure, cooling rate, and phase structure of the produced powders were also investigated. The Curie points shifted to higher temperatures from the ingot condition to surfactant active ball-milling and the values for Nd15Fe77B8 ingot alloy, melt-spun powders, and surfactant active ball-milled powders were 552 K, 595 K, and 604 K (279 °C, 322 °C, and 331 °C), respectively. It was noted that the surfactant active ball-milling process improved the magnetic and thermal properties of melt-spun Nd15Fe77B8 alloy powders. Compared to relevant literature, the coercivity of powders increased significantly with increasing milling time and decreasing in powder size. The coercivity value as high as 3427 kA m−1 was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Metallic Glasses and Amorphous Alloys · Rare-earth and actinide compounds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. G.H. Yan, R.J. Chen, Y. Ding, S. Guo, D. Lee and A.R. Yan, J. Phys. Conf. Ser., 2011, vol. 266, pp. 012052.10.1088/1742-6596/266/1/012052 ↗
2. G. Ding, S. Guo, L. Cai, L. Chen, C. Yan, D. Lee and A. Yan, IEEE Trans. Magn., 2015,vol. 51, pp. 1-4.
3. J. Gao, T. Volkmann, S. Roth, W. Löser and D. Herlach, J. Magn. Magn. Mater., 2001, vol. 234, pp. 313-319.10.1016/S0304-8853(01)00388-2 ↗
4. Y. Kaneko, F. Kuniyoshi and N. Ishigaki, J. Alloys Compd., 2006,vol. 408-412, pp. 1344-1349.10.1016/j.jallcom.2005.04.169 ↗
5. Y. Li, H. Evans, I. Harris and I. Jones, Oxid. Met., 2003,vol. 59, pp.167-182.10.1023/A:1023078218047 ↗
6. M. Yamamoto, A. Inoue and T. Masumoto, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 1989,vol. 20A, pp. 5-11.10.1007/BF02647488 ↗
7. J. Buh, P.J. McGuiness, N. Daneu and D. Arčon, Intermetallics, 2012, vol. 31, pp. 152-156.10.1016/j.intermet.2012.06.019 ↗
8. W.F. Brown, Rev.Modn. Phys., 1945, vol. 17, pp. 15-19.10.1103/RevModPhys.17.15 ↗
9. W.F. Brown, Phys. Rev., 1957, vol. 105, pp. 1479-1482.10.1103/PhysRev.105.1479 ↗
10. Aharoni, Rev. Modn. Phys., 1962, vol. 34, pp. 227-238.10.1103/RevModPhys.34.227 ↗
11. R.R. Wang, G. Jia, Z.-H. Fang, W. Wang, X.-F. Meng, Z.-Y. Xie and F. Zhang, Chinese Phys. B, 2014, vol. 23, pp. 113201.10.1088/1674-1056/23/11/113201 ↗
12. H. Kronmüller, Phys. Status Solidi B, 1987, vol. 144, pp. 385-396.10.1002/pssb.2221440134 ↗
13. H. Kronmüller and D. Goll, Scripta Mat., 2002, vol. 47, pp. 551-556.10.1016/S1359-6462(02)00176-8 ↗
14. T. Harada and T. Kuji, J.Matt. Res., 1994, vol. 9, pp. 372-376.10.1557/JMR.1994.0372 ↗
15. M. Abuin, Z. Turgut, N. Aronhime, V. Keylin, A. Leary, V. DeGeorge, J. Horwath, S.L. Semiatin, D.E. Laughlin and M.E. McHenry, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2015, vol. 46A, pp. 5002-5010.10.1007/s11661-015-3120-0 ↗
16. S. Ozawa, T. Saito and T. Motegi, J. Alloys Compd., 2004, vol. 363, pp. 268-275.10.1016/S0925-8388(03)00461-4 ↗
17. K.D. Durst and H. Kronmüller, J. Magn. Magn. Mater., 1987, vol. 68, pp. 63-75.10.1016/0304-8853(87)90097-7 ↗
18. J. Gao, T. Volkmann and D. Herlach, Acta Mater., 2002, vol. 50, pp. 3003-3012.10.1016/S1359-6454(02)00128-3 ↗
19. J. Chapman, L. Heyderman, S. Young, D. Donnet, P. Zhang and H. Davies, Scripta Metall. Mater., 1995, vol. 33, pp. 1807-1816.10.1016/0956-716X(95)00418-U ↗
20. Z. Tian, S. Li, K. Peng, B. Gu, J. Zhang, M. Lu and Y. Du, Mater. Sci. Eng. A, 2004, vol. 380, pp. 143-146.10.1016/j.msea.2004.03.077 ↗
21. D.N. Brown, Z. Wu, F. He, D.J. Miller and J.W. Herchenroeder, J. Phys. Condens. Matter., 2014, vol. 26, pp. 064202.10.1088/0953-8984/26/6/064202 ↗
22. E.A. Theisen, M.J. Davis, S.J. Weinstein and P.H. Steen, Chem. Eng. Sci., 2010, vol. 65, pp. 3249-3259.10.1016/j.ces.2010.02.018 ↗
23. E.M. Ahmed and M.R. Ebrahim, Eur. Phys. J. Plus, 2014, vol. 129, pp. 2.10.1140/epjp/i2014-14060-0 ↗
24. N.G. Akdogan, G.C. Hadjipanayis and D.J. Sellmyer, J. Appl. Phys., 2009, vol. 105, 07A710.10.1063/1.3067851 ↗
25. K. Simeonidis, C. Sarafidis, E. Papastergiadis, M. Angelakeris, I. Tsiaoussis and O. Kalogirou, Intermetallics, 2011, vol. 19, pp. 589-595.10.1016/j.intermet.2010.12.012 ↗
26. P. Saravanan, R. Gopalan, N.V.R. Rao, M.M. Raja and V. Chandrasekaran, J. Phys. D: Appl. Phys., 2007, vol. 40, pp. 5021-5026.10.1088/0022-3727/40/17/002 ↗
27. H.G. Cha, Y.H. Kim, C.W. Kim, H.W. Kwon and Y.S. Kang, J. Phys. Chem. C, 2007, vol. 111, pp. 1219-122.10.1021/jp065997s ↗
28. V.M. Chakka, B. Altuncevahir, Z.Q. Jin, Y. Li and J.P. Liu, J. Appl. Phys., 2006, vol. 99, pp. 08E912.10.1063/1.2170593 ↗
29. W. Yiping, L. Yang, R. Chuanbing and J.P. Liu, Nanotechnology, 2007, vol. 18, pp. 465701.10.1088/0957-4484/18/46/465701 ↗
30. V. Neu and L. Schultz, J. Appl. Phys., 2001, vol. 90, pp. 1540-1544,.10.1063/1.1380223 ↗
31. P. Sungkhaphaitoon, S. Wisutmethangoon and T. Plookphol, Mater. Res., 2017, pp. 1-7.
32. P.H. Shingu, K. Kobayashi, R. Suzuki, K. Takeshita: Proc. 4th Int. Conf. on Rapidly Quenched Metals, 1982, vol. 57.
33. S.P.H. Marashi, A. Abedi, S. Kaviani, S.H. Aboutalebi, M. Rainforth and H.A. Davies, J. Phys. D: Appl. Phys., 2009, vol. 42, pp. 115410.10.1088/0022-3727/42/11/115410 ↗
34. M. H. Saleh, F. Ismail, P. Hussain and M. Mohammad, Solid State Sci. Techn., 2005, vol. 13, pp. 268-275.
35. H. Jones, Ultrarapid Quenching of Liquid Alloys, Academic Press, New York, 1981.
36. W.S. Sun, S.D. Li and M.X. Quan, J. Magn. Magn. Mater., 1997, vol. 176, pp. 307-312.10.1016/S0304-8853(97)00429-0 ↗
37. P. Nothnagel, K.H. Müller, D. Eckert and A. Handstein, J. Magn. Magn. Mater., 1991, vol. 101, pp. 379-381.10.1016/0304-8853(91)90786-A ↗
38. H. Kronmüller, K.D. Durst and M. Sagawa, J. Magn. Magn. Mater., 1988, vol. 74, pp. 291-302.10.1016/0304-8853(88)90202-8 ↗
39. S. Ozawa, H. Sato, T. Saito, T. Motegi and J. Yu, J. Appl. Phys., 2002, vol. 91, pp. 8831.10.1063/1.1456409 ↗
40. K.P. Su, Z.W. Liu, D.C. Zeng, D.X. Huo, L.W. Li and G.Q. Zhang, J. Phys. D. Appl. Phys., 2013, 46, pp. 245003.10.1088/0022-3727/46/24/245003 ↗
41. B.Z. Cui, W.F. Li and G.C. Hadjipanayis, Acta Mater., 2011, vol. 59, pp. 563-571.10.1016/j.actamat.2010.09.060 ↗
42. N. Poudyal, C.B. Rong and J.P. Liu, J. Appl. Phys., 2011, vol. 109, pp. 07B526.10.1063/1.3561157 ↗
43. M. Ullah, M.E. Ali and S.B.A. Hamid, Rev. Adv. Mater. Sci., 2014, vol. 37, pp. 1-14.
44. G.L. Chen, IEEE Trans. Magn., 1998, vol. 34, pp. 366-371.10.1109/20.667765 ↗
45. B.Z. Cui, L.Y. Zheng, W.F. Li, J.F. Liu and G.C. Hadjipanayis, Acta Mater., 2012, vol. 60, pp. 1721-1730.10.1016/j.actamat.2011.11.062 ↗
46. L. Schultz, J. Wecker and E. Hellstern, J. Appl. Phys., 1987, vol. 61, pp. 3583-3585.10.1063/1.338708 ↗