Metal-Matrix Composites Prepared by Paper-Manufacturing Technology
Source abstract
Abstract
In this work, metal-matrix composites were prepared via paper-manufacturing technology using metastable austenitic steel powder of type 16-7-3 (Cr-Mn-Ni in wt pct) and magnesia partially stabilized zirconia reinforcing particles. The influence of the process parameters on the paper web formation and the resulting properties of the MMCs were studied and solids retention of >90 wt pct was achieved. During filtration of the aqueous fiber-filler suspension, the steel particles were incorporated in the fiber network, and steel clusters were formed. Calendering had a positive influence on the porosity, bulk density, and tensile strength of the green paper sheets. Within this contribution, the debinding process for the metal-matrix paper sheets was in focus. A debinding rate of 0.5 K/min to 733 K (460 °C) with a dwell time of 90 minutes was sufficient to completely remove cellulose fibers. The sintered composites attained a tensile strength of up to 177 N/mm2 at a total porosity of 66 pct.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · Material Properties and Processing · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. N. Travitzky, H. Windsheimer, T. Fey and P. Greil: J. Amer. Cer. Soc. 2008, vol. 91, pp. 3477-3492.10.1111/j.1551-2916.2008.02752.x ↗
2. B. Gutbrod, D. Haas, N. Travitzky and P. Greil: Adv. Eng. Mater. 2011, vol. 13, pp. 494-501.10.1002/adem.201100017 ↗
3. T. Schlordt, B. Dermeik, V. Beil, M. Freihart, A. Hofenauer, N. Travitzky and P. Greil: Ceram. Int., 2013, vol. 40, pp. 4917-4926.10.1016/j.ceramint.2013.10.080 ↗
4. H. Windsheimer, N. Travitzky, A. Hofenauer and P. Greil: Adv. Mater., 2007, vol. 19, pp. 4515-4519.10.1002/adma.200700789 ↗
5. S.L. Stares, M.C. Fredel, P. Greil and N. Travitzky: Mater. Lett., 2013, vol. 98, pp. 161-163.10.1016/j.matlet.2013.02.021 ↗
6. M. Köth: In Fachbereich Chemie, (Technische Universität Darmstadt: Darmstadt, 2001), pp. 1-166.
7. C. Kluthe, B. Dermeik, W. Kollenberg, P. Greil and N. Travitzky: J. Ceram. Sci. Tech., 2012, vol. 03, pp. 111-118.
8. D. Nikolay, A. Hofenauer and C. Sorg: Keramische Zeitschrift 2010, vol. 62, pp. 191-196.
9. C.G. Aneziris, W. Schärfl, H. Biermann and U. Martin, Int. J. Appl. Ceram. Technol. 2009, vol. 6, pp. 727-735.10.1111/j.1744-7402.2008.02321.x ↗
10. H. Berek, C.G. Aneziris, M. Hasterok, H. Biermann, S. Wolf, and L. Krüger: In PTM2010 Solid-Solid Phase Transformations in Inorganic Materials, (Avignon, France, 2010).
11. A. Weiß, H. Gutte and P. R. Scheller, Steel Res. Int. 2006, vol. 77, pp. 727-732.10.1002/srin.200606454 ↗
12. C.G. Aneziris, H. Berek, M. Hasterok, H. Biermann, S. Wolf and L. Krüger, Adv. Eng. Mater. 2010, vol. 12, pp. 197-204.10.1002/adem.200900273 ↗
13. C. Weigelt, C. G. Aneziris, H. Berek, D. Ehinger and U. Martin, Adv. Eng. Mater. 2012, vol. 14, pp. 53-61.10.1002/adem.201100126 ↗
14. C. Weigelt: In Fakultät für Maschinenbau, Verfahrens- und Energietechnik, (Technische Universität Bergakademie Freiberg: Freiberg : TU Bergakademie, 2012), pp. 1-195.
15. A. Weiß, A. Jahn and P. R. Scheller, Mat.-wiss. u. Werkstofftech., 2009, vol. 40, p. 606-611.10.1002/mawe.200800361 ↗
16. M. Dadfar, M.H. Fathi, F. Karimzadeh, M.R. Dadfar and A. Saatchi, Mater. Lett., 2007, vol. 61, pp. 2343-2346.10.1016/j.matlet.2006.09.008 ↗
17. B.T. Lu, Z.K. Chen, J.L. Luo, B.M. Patchett and Z.H. Xu, Electrochim. Acta, 2005, vol. 50, pp. 1391-1403.10.1016/j.electacta.2004.08.036 ↗
18. E. Pagounis and V.K. Lindroos, Mater. Sci. Eng., 1998, vol. A246, pp. 221-234.10.1016/S0921-5093(97)00710-7 ↗
19. C. Weigelt, S. Giersberg, C. Wenzel and C.G. Aneziris, Adv. Eng. Mater., 2010, vol. 12, pp. 486-492.10.1002/adem.200900303 ↗