journal article·2015-12

Visualization of Microstructural Factor Resisting the Cleavage-Crack Propagation in the Simulated Heat-Affected Zone of Bainitic Steel

Hidenori Terasaki, Yu Miyahara, Mitsuru Ohata, Koji Moriguchi, Yusaku Tomio, Kotaro Hayashi

Publisher page

Abstract

Cleavage-crack propagation behavior was investigated in the simulated coarse-grained heat-affected zone (CGHAZ) of bainitic steel using electron backscattering diffraction (EBSD) pattern analysis when a low heat input welding was simulated. From viewpoint of crystallographic analysis, it was the condition in which the Bain zone was smaller than the close-packed plane (CP) group. It was clarified that the Bain zone and CP group boundaries provided crack-propagation resistance. The results revealed that when the Bain zone was smaller than the CP group, crack length was about one quarter the size of that measured when the CP group was smaller than the Bain zone because of the increasing Bain-zone boundaries. Furthermore, it was clarified that the plastic work associated with crack opening and resistance at the Bain and CP boundaries could be visualized by the kernel average misorientation maps.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. P. Brozzo, G. Buzzichelli, A. Mascanzoni, M. Mirablile, Metal Science, 1977, vol. 11, pp. 123-130.10.1179/msc.1977.11.4.123 ↗
2. H. Terasaki, Y. Komizo, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2013, vol. 44A, pp. 2683-2689.10.1007/s11661-013-1610-5 ↗
3. A.F. Gourgues, H.M. Flower, T.C. Lindley, Mater Sci Tech Ser, 2000, vol. 16, pp. 26-40.10.1179/026708300773002636 ↗
4. A.F. Gourgues, Mater Sci Tech Ser, 2002, vol. 18, pp. 119-133.10.1179/026708301125000320 ↗
5. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, T. Maki, Acta Materialia, 2003, vol. 51, pp. 1789-1799.10.1016/S1359-6454(02)00577-3 ↗
6. N. Takayama, G. Miyamoto, T. Furuhara, Acta Materialia,2012, vol. 60, pp. 2387-2396.10.1016/j.actamat.2011.12.018 ↗
7. L.Y. Lan, X.W. Kong, C.L. Qiu, Materials Characterization, 2015, vol. 105, pp. 95-103.10.1016/j.matchar.2015.05.010 ↗
8. A. Lambert, X. Garat, T. Sturel, A.F. Gourgues, A. Gingell, Scripta Materialia, 2000, vol. 43, pp. 161-166.10.1016/S1359-6462(00)00386-9 ↗
9. J. Nohava, P. Hausild, M. Karlik, P. Bompard, Materials Characterization, 2002, vol. 49, pp. 211-217.10.1016/S1044-5803(02)00360-1 ↗
10. A. Lambert-Perlade, A.F. Gourgues, J. Besson, T. Sturel, A. Pineau, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2004, 35A, pp. 1039-53.10.1007/s11661-004-1007-6 ↗
11. A. Lambert-Perlade, A.F. Gourgues, A. Pineau, Acta Materialia, 2004, vol. 52, pp. 2337-48.10.1016/j.actamat.2004.01.025 ↗
12. Y. Li, T.N. Baker, Mater Sci Tech Ser, 2010, vol. 26, pp. 1029-1040.10.1179/026708309X12512744154360 ↗
13. [13] L. Rancel, M. Gomez, S.F. Medina, I. Gutierrez, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2011, vol. 530, pp. 21-27.10.1016/j.msea.2011.09.001 ↗
14. X.D. Li, X.P. Ma, S.V. Subramanian, C.J. Shang, International Journal of Fracture, 2015, vol. 193, pp. 131-139.10.1007/s10704-015-0024-3 ↗
15. H. Terasaki, Y. Shintome, Y.I. Komizo, M. Ohata, K. Moriguchi, Y. Tomio, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2015, vol. 46A, pp. 2035-2039.10.1007/s11661-015-2817-4 ↗
16. A. Stormvinter, G. Miyamoto, T. Furuhara, P. Hedstrom, A. Borgenstam, Acta Materialia, 2012, vol. 60, pp. 7265-7274.10.1016/j.actamat.2012.09.046 ↗
17. S.I. Wright, M.M. Nowell, D.P. Field, Microsc Microanal, 2011, vol. 17, pp. 316-329.10.1017/S1431927611000055 ↗
18. A.A. Griffith, Metall Mater Trans A, 1921, vol. 221, pp. 163-198.