journal article·2024-08Open access

A Comparison of Sigma Phase Formation in Solubilized Hyper Duplex Stainless Steel and Super Duplex Stainless Steel Filler Metals

Andres Acuna, Kaue Correa Riffel, Antonio Ramirez

Abstract

Abstract This study focuses on the kinetic analysis of sigma phase formation in filler metal wires on Super Duplex Stainless Steel (SDSS) and Hyper Duplex Stainless Steel (HDSS). Precipitation data reveal that in the solubilized microstructure, sigma phase kinetics are more prominent in SDSS. This increased susceptibility is attributed to the greater number of nucleation sites, which is facilitated by the larger interface area/volume and the higher chromium content in the ferrite. The difference in interface area/volume is significantly more influential in determining kinetics than the composition difference, with nucleation sites playing a central role. The sigma phase transformation in both materials was modeled using the JMAK kinetic law. The JMAK plots exhibit a transition in kinetic mechanisms, evolving from discontinuous precipitation to diffusion-controlled growth. In SDSS, the JMAK values indicate “grain boundary nucleation after saturation,” followed by “thickening of large plates.” In contrast, HDSS values point to “grain edge nucleation after saturation,” followed by “thickening of large needles.” The higher kinetics in SDSS are characterized by a smaller nucleation activation energy of 56.4 kJ/mol, in contrast to HDSS's 490.0 kJ/mol. CALPHAD-based data support the JMAK results, aligning with the maximum kinetics temperature of SDSS (875 °C to 925 °C) and HDSS (900 °C to 925 °C). Therefore, the JMAK sigma phase kinetics effectively describe the experimental data and its dual kinetics behavior, even though CALPHAD-based TTT calculations often overestimate sigma formation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. M. Knyazeva and M. Pohl: Metallogr. Microstruct. Anal., 2013, vol. 2, pp. 113–21. https://doi.org/10.1007/s13632-013-0066-8.10.1007/s13632-013-0066-8 ↗
2. API RP 582 - Welding Guidelines for the Chemical, Oil, and Gas Industries, A. P. I. API, 1220 L Street, NW, Washington, DC, 2016.
3. J.W. Elmer, T.A. Palmer, and E.D. Specht: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 464–75. https://doi.org/10.1007/s11661-006-9076-3.10.1007/s11661-006-9076-3 ↗
4. J.O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700. https://doi.org/10.1179/mst.1992.8.8.685.10.1179/mst.1992.8.8.685 ↗
5. E.O. Hall and S.H. Algie: SIGMA PHASE. J. Inst. Met., 1966, vol. 94, pp. 61.
6. J.O. Nilsson, P. Kangas, T. Karlsson, and A. Wilson: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 35–45. https://doi.org/10.1007/s11661-000-0050-1.10.1007/s11661-000-0050-1 ↗
7. C.-C. Hsieh: ISRN Metall., 2012, vol. 2012, pp. 1–6.10.5402/2012/732471 ↗
8. S.K. Bonagani, K. Chandra, K.V. Ravikanth, H. Donthula, S. Roychowdhury, and V. Kain: Mater. Sci. Eng. A, 2023, https://doi.org/10.1016/j.msea.2023.145763.10.1016/j.msea.2023.145763 ↗
9. V.I. Kopylov, et al.: Metals, 2023, https://doi.org/10.3390/met13010045.10.3390/met13010045 ↗
10. H.H. Lu, X.Q. Shen, and W. Liang: Acta Metall. Sin., 2021, vol. 34, pp. 1285–95. https://doi.org/10.1007/s40195-021-01227-z.10.1007/s40195-021-01227-z ↗
11. H.H. Lu, H.K. Guo, and W. Liang: Mater Charact, 2022, https://doi.org/10.1016/j.matchar.2022.112050.10.1016/j.matchar.2022.112050 ↗
12. C.P. Lu, X.S. Shen, X.J. Cheng, C.W. Du, and H.C. Ma: J. Mater. Eng. Perform., 2023, https://doi.org/10.1007/s11665-023-08949-4.10.1007/s11665-023-08949-4 ↗
13. Z.Q. Zhang, H.Y. Jing, L.Y. Xu, Y.D. Han, and L. Zhao: Investigation on microstructure evolution and properties of duplex stainless steel joint multi-pass welded by using different methods. Mater. Des., 2016, vol. 109, pp. 670–85. https://doi.org/10.1016/j.matdes.2016.07.110.10.1016/j.matdes.2016.07.110 ↗
14. Y.X. Han, R.T. Chi, Q.C. Chen, B. Wang, W. Liu, and Y.L. He: J. Mater. Res. Technol., 2023, vol. 26, pp. 2560–74. https://doi.org/10.1016/j.jmrt.2023.08.034.10.1016/j.jmrt.2023.08.034 ↗
15. Y. Han, et al.: Tungsten, 2023, vol. 5, pp. 419–39. https://doi.org/10.1007/s42864-022-00168-z.10.1007/s42864-022-00168-z ↗
16. L.K.D. Inácio, W. Wolf, B.C.B. de Leucas, G.C. Stumpf, and D.B. Santos: Mater Charact, 2021, https://doi.org/10.1016/j.matchar.2020.110802.10.1016/j.matchar.2020.110802 ↗
17. T.R. Dandekar, R.K. Khatirkar, D. Mahadule, J. Chavhan, and D. Kumar: Mater. Today Commun., 2022, https://doi.org/10.1016/j.mtcomm.2022.104913.10.1016/j.mtcomm.2022.104913 ↗
18. I.J. Marques, F.J. Silva, and T.F.A. Santos: J. Alloys Compd., 2020, https://doi.org/10.1016/j.jallcom.2019.153170.10.1016/j.jallcom.2019.153170 ↗
19. M.T.G. de Sampaio, et al.: J. Mater. Res. Technol., 2023, vol. 26, pp. 8149–64. https://doi.org/10.1016/j.jmrt.2023.09.106.10.1016/j.jmrt.2023.09.106 ↗
20. Z.X. Liu, Y. Xie, L.X. Zhang, W.Z. Zhao, C.Z. Zhao, and H. He: Mater. Today Commun., 2023, https://doi.org/10.1016/j.mtcomm.2023.106215.10.1016/j.mtcomm.2023.106215 ↗
21. A.K. Maurya, C. Pandey, and R. Chhibber: Int. J. Pressure Vessels Piping, 2021, https://doi.org/10.1016/j.ijpvp.2021.104439.10.1016/j.ijpvp.2021.104439 ↗
22. E.M. Cojocaru, D. Raducanu, A. Nocivin, and V.D. Cojocaru: Adv. Res., 2021, vol. 30, pp. 53–61. https://doi.org/10.1016/j.jare.2020.11.005.10.1016/j.jare.2020.11.005 ↗
23. A.G.C. dos Santos, et al.: J. Mater. Res. Technol, 2021, vol. 15, pp. 2625–32. https://doi.org/10.1016/j.jmrt.2021.09.051.10.1016/j.jmrt.2021.09.051 ↗
24. A.S. Fedorov, A.I. Zhitenev, D.A. Strekalovskaya, A.A. Kur, and A.A. Alkhimenko: Metals, 2021, https://doi.org/10.3390/met11111750.10.3390/met11111750 ↗
25. G.S. da Fonseca, P.S.N. Mendes, and A.C.M. Silva: Metals, 2019, https://doi.org/10.3390/met9010034.10.3390/met9010034 ↗
26. G.S. da Fonseca, P.M. de Oliveira, M.G. Diniz, D.V. Bubnoff, and J.A. de Castro: Mater. Res. Ibero Am J. Mater., 2017, vol. 20, pp. 249–55. https://doi.org/10.1590/1980-5373-mr-2016-0436.10.1590/1980-5373-mr-2016-0436 ↗
27. L. O. P. da Silva, T. N. Lima, F. M. dos Santo, Jr., B. Callegari, L. F. Folle, and R. S. Coelho, Crystals, vol. 14, no. 3, 204, 2024. https://doi.org/10.3390/cryst1403020410.3390/cryst14030204 ↗
28. B.B. Zhang, Z.H. Jiang, H.B. Li, S.C. Zhang, H. Feng, and H. Li: Mater Charact, 2017, vol. 129, pp. 31–39. https://doi.org/10.1016/j.matchar.2017.04.018.10.1016/j.matchar.2017.04.018 ↗
29. D.H. Kim, N.H. Kim, and H.W. Lee: Mater. Sci. Technol., 2020, vol. 36, pp. 783–92. https://doi.org/10.1080/02670836.2020.1743575.10.1080/02670836.2020.1743575 ↗
30. B.B. Zhang, et al.: Mater Charact, 2021, https://doi.org/10.1016/j.matchar.2021.111096.10.1016/j.matchar.2021.111096 ↗
31. J. Wang, W.L. Chen, H.J. Meng, Y.S. Cui, C.L. Zhang, and P.D. Han: J. Iron. Steel Res. Int., 2019, vol. 26, pp. 452–61. https://doi.org/10.1007/s42243-018-0175-3.10.1007/s42243-018-0175-3 ↗
32. A. Acuna, A. Ramirez, R. Menon, P.-Å. Björnstedt, and L. Carvalho, in ASME 2021 Pressure Vessels & Piping Conference, 2021, vol. 4, V004T06A042. https://doi.org/10.1115/PVP2021-6204210.1115/PVP2021-62042 ↗
33. A. Acuna and A.J. Ramirez: Mater Charact, 2023, vol. 200, p. 112832. https://doi.org/10.1016/j.matchar.2023.112832.10.1016/j.matchar.2023.112832 ↗
34. A. Acuna, A. Ramirez, and K.C. Riffel: Sci. Technol. Weld. Join., 2023, https://doi.org/10.1080/13621718.2023.2246719.10.1080/13621718.2023.2246719 ↗
35. A. Acuna, K.C. Riffel, and A. Ramirez: Mater Charact, 2023, https://doi.org/10.1016/j.matchar.2023.113433.10.1016/j.matchar.2023.113433 ↗
36. G. Chai and P. Kangas, Super and hyper duplex stainless steels: structures, properties and applications. 21st European Conference on Fracture, (Ecf21), vol. 2, pp. 1755–62, 2016. https://doi.org/10.1016/j.prostr.2016.06.221.10.1016/j.prostr.2016.06.221 ↗
37. M.L. Stein: Interpolation of spatial data: some theory for kriging, Springer, Berlin, 1999.10.1007/978-1-4612-1494-6 ↗
38. A.J. Ramirez, J.C. Lippold, and S.D. Brandi: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1575–97. https://doi.org/10.1007/s11661-003-0304-9.10.1007/s11661-003-0304-9 ↗
39. A. Acuna, A. Ramirez, and K.C. Riffel: Sci. Technol. Weld. Join., 2023, vol. 28, pp. 885–93. https://doi.org/10.1080/13621718.2023.2246719.10.1080/13621718.2023.2246719 ↗
40. W.A. Johnson and R.F. Mehl: Trans. Am. Inst. Min. Metall. Eng., 1939, vol. 135, pp. 416–42.
41. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103–12. https://doi.org/10.1063/1.1750380.10.1063/1.1750380 ↗
42. M. Avrami: J. Chem. Phys., 1941, vol. 9, pp. 177–84. https://doi.org/10.1063/1.1750872.10.1063/1.1750872 ↗
43. H.S. Ray and S. Ray: Kinetics of metallurgical processes, Springer, Berlin, 2018.10.1007/978-981-13-0686-0 ↗
44. J.W. Christian: The theory of transformations in metals and alloys, 3rd ed. Pergamon, Amsterdam, 2002, p. 2.
45. B. Josefsson, J.-O. Nillson, and A. Wilson, Phase transformations in duplex steels and the relation between continuous cooling and isothermal heat treatment, presented at the Duplex Stainless Steels '91, France, 1991.
46. S. Hertzman, W. Roberts, and M. Lindenmo, Microstructure and Properties of Nitrogen Alloyed Duplex Stainless Steel After Welding Treatments, presented at the Duplex Stainless Steel '86, The Netherlands, 1986.
47. S. Bernhardsson, The Corrosion Resistance of Duplex Stainless Steels, presented at the Duplex Stainless Steels '91, France, 1991.
48. Y. Yang, B. Yan, J. Li, and J. Wang: Corros. Sci., 2011, vol. 53, pp. 3756–63. https://doi.org/10.1016/j.corsci.2011.07.022.10.1016/j.corsci.2011.07.022 ↗
49. K.C. Russell: Adv. Coll. Interface. Sci., 1980, vol. 13, pp. 205–318. https://doi.org/10.1016/0001-8686(80)80003-0.10.1016/0001-8686(80)80003-0 ↗
50. R. Wagner, R. Kampmann, and P. W. Voorhees, in Phase Transformations in Materials, 2001, pp. 309–407.10.1002/352760264X.ch5 ↗
51. R. Kampmann and R. Wagner, Kinetics of precipitation in metastable binary alloys - theory and application to Cu-1.9 at pct Ti and Ni-14 at pct Al, First edition. ed. (Acta-scripta metallurgica proceedings series, no. 2). Oxford Oxfordshire ; New York: Pergamon Press, 1984, pp. 91-103.10.1016/B978-0-08-031651-2.50018-5 ↗
52. D.C. Dos Santos and R. Magnabosco: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1554–65. https://doi.org/10.1007/s11661-016-3323-z.10.1007/s11661-016-3323-z ↗
53. I.J. Marques, A.D.A. Vicente, J.A.S. Tenorio, and T.F.D. Santos: Mater. Res. Ibero Am. J. Mater., 2017, vol. 20, pp. 152–58. https://doi.org/10.1590/1980-5373-mr-2016-1060.10.1590/1980-5373-mr-2016-1060 ↗
54. M. Pohl and O. Storz: Int. J. Mater. Res., 2004, vol. 95, pp. 631–38.10.1515/ijmr-2004-0120 ↗
55. K.N. Tu and D. Turnbull: Acta Metall., 1967, vol. 15, pp. 1317–2000. https://doi.org/10.1016/0001-6160(67)90007-7.10.1016/0001-6160(67)90007-7 ↗
56. K.N. Tu and D. Turnbull: Acta Metall., 1967, vol. 15, p. 369. https://doi.org/10.1016/0001-6160(67)90214-3.10.1016/0001-6160(67)90214-3 ↗
57. R.A. Fournelle and J.B. Clark: Metall. Trans., 1972, vol. 3, pp. 2757–67. https://doi.org/10.1007/BF02652842.10.1007/BF02652842 ↗
58. D. Duly and Y. Brechet: Acta Metall. Mater., 1994, vol. 42, pp. 3035–43. https://doi.org/10.1016/0956-7151(94)90400-6.10.1016/0956-7151(94)90400-6 ↗
59. I. Machado: Transformações de fase no estado sólido em alguns aços inoxidáveis austeníticos e ferríticos-austeníticos (dúplex) contendo altos fatores de nitrogênio, Universidade de São Paulo, São Paulo, Escola Politécnica, 1999.10.11606/T.3.1999.tde-23052022-145343 ↗
60. M. Pohl and O. Storz: Zeitsch. Metall., 2004, vol. 95, pp. 631–38. https://doi.org/10.3139/146.017999.10.3139/146.017999 ↗
61. A.J. Ramirez, S.D. Brandi, and J.C. Lippold: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 301–13. https://doi.org/10.1179/136217104225021715.10.1179/136217104225021715 ↗
62. P. Ferro, F. Bonollo, and G. Timelli: Metall. Ital., 2012, vol. 5, pp. 7–12.
63. S.M. Kim, J.S. Kim, K.T. Kim, K.-T. Park, and C.S. Lee: Mater. Sci. Eng. A, 2013, vol. 573, pp. 27–36. https://doi.org/10.1016/j.msea.2013.02.044.10.1016/j.msea.2013.02.044 ↗
64. R. Magnabosco: Mater. Res. Ibero Am J. Mater., 2009, vol. 12, pp. 321–27. https://doi.org/10.1590/s1516-14392009000300012.10.1590/s1516-14392009000300012 ↗
65. A. Wilson and J.O. Nilsson: Scand. J. Metall., 1996, vol. 25, pp. 178–85.
66. T. A. Palmer, J. W. Elmer, J. Wong, S. S. Babu, and J. M. Vitek, Investigation of the kinetics of the ferrite/austenite phase transformation in the HAZ of a 2205 duplex stainless steel weldment (Trends in Welding Research, Proceedings). 2003, pp. 23–28.
67. P. Ferro, A. Fabrizi, and F. Bonollo: Acta Metall. Sin., 2016, vol. 29, pp. 859–68. https://doi.org/10.1007/s40195-016-0462-6.10.1007/s40195-016-0462-6 ↗
68. P. Ferro, F. Bonollo, A. Fabrizi, G. Timelli, and G. Mazzacavallo: Metall. Ital., 2013, vol. 5, pp. 25–29.
69. P. Ferro and F. Bonollo: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1109–16. https://doi.org/10.1007/s11661-011-0966-7.10.1007/s11661-011-0966-7 ↗
70. A.W. Bowen and G.M. Leak: Metall. Trans., 1970, vol. 1, p. 1695. https://doi.org/10.1007/bf02642019.10.1007/bf02642019 ↗