journal article·2024-05Open access

Comparative Plasma Nitrocarburizing of AISI 316L and AISI 304 Steels Using a Solid Carbon Active Screen: Differences in the Developing Microstructures

S. M. Jafarpour, S. Martin, C. Schimpf, A. Dalke, H. Biermann, A. Leineweber

Abstract

Abstract This paper features a direct comparison of the response of AISI 316L and AISI 304 austenitic stainless steels to active screen plasma nitrocarburizing applied for a wide range of treatment temperatures from 380 °C to 480 °C (653 K to 753 K). Thereby, an active screen made of solid carbon was used without applying bias plasma to the treated steel samples. Since it is believed that the result of treatment strongly depends on the concentration of in-situ generated hydrogen cyanide, the conditions of the treatments were adapted to keep this concentration constant. Under such treatment conditions, it was shown that AISI 316L has a lower tendency to form CrN than AISI 304 at comparable treatment temperatures, where the threshold temperature was found below 480 °C (753 K) for the former and below 440 °C (713 K) for the latter. In addition, the decomposition of expanded austenite generated on the treated AISI 316L at high temperatures leads to CrN and (mainly) Cr-depleted austenite phase, which is possibly accompanied by minor amounts of $$\alpha$$-ferrite. Instead, for the treated AISI 304, decomposition leads to CrN and transformed $$\alpha$$-ferrite phase. The modified layer thicknesses achieved after a given treatment duration and the kinetics of the layer growth showed a characteristic temperature dependence for each steel, which is discussed in accordance with the results of microstructure analysis.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. K.H. Lo, C.H. Shek, and J. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39–104. https://doi.org/10.1016/j.mser.2009.03.001.10.1016/j.mser.2009.03.001 ↗
2. K. Jaffré, B. Ter-Ovanessian, H. Abe, N. Mary, B. Normand, and Y. Watanabe: Metals, 2021, vol. 11, p. 135. https://doi.org/10.3390/met11010135.10.3390/met11010135 ↗
3. T. Ohmi, Y. Nakagawa, M. Nakamura, A. Ohki, and T. Koyama: J. Vac. Sci. Technol. A, 1996, vol. 14, pp. 2505–10. https://doi.org/10.1116/1.580010.10.1116/1.580010 ↗
4. T. Bell: Surf. Eng., 2002, vol. 18, pp. 415–22. https://doi.org/10.1179/026708402225006268.10.1179/026708402225006268 ↗
5. M.A.J. Somers and T.L. Christiansen: Thermochemical Surface Engineering of Steels, Woodhead Publishing, Oxford, 2015, pp. 581–614.10.1533/9780857096524.4.581 ↗
6. C. Blawert, B.L. Mordike, G.A. Collins, K.T. Short, Y. Jirásková, O. Schneeweiss, and V. Perina: Surf. Coat. Technol., 2000, vol. 128–129, pp. 219–25. https://doi.org/10.1016/S0257-8972(00)00651-4.10.1016/S0257-8972(00)00651-4 ↗
7. H.-J. Spies: J. Heat Treat. Mater., 2013, vol. 68, pp. 86–96. https://doi.org/10.3139/105.110182.10.3139/105.110182 ↗
8. F. Borgioli: Metals, 2020, vol. 10, p. 98. https://doi.org/10.3390/coatings10020098.10.3390/coatings10020098 ↗
9. H. Dong: Int. Mater. Rev., 2010, vol. 55, pp. 65–98. https://doi.org/10.1179/095066009X12572530170589.10.1179/095066009X12572530170589 ↗
10. Y. Sun and E. Haruman: Solid State Phenom., 2006, vol. 118, pp. 85–90. https://doi.org/10.4028/www.scientific.net/SSP.118.85.10.4028/www.scientific.net/SSP.118.85 ↗
11. T. Christiansen and M.A.J. Somers: Surf. Eng., 2005, vol. 21, pp. 445–55. https://doi.org/10.1179/174329405X68597.10.1179/174329405X68597 ↗
12. Z. Cheng, C.X. Li, H. Dong, and T. Bell: Surf. Coat. Technol., 2005, vol. 191, pp. 195–200. https://doi.org/10.1016/j.surfcoat.2004.03.004.10.1016/j.surfcoat.2004.03.004 ↗
13. Y. Sun, T. Bell, Z. Kolosvary, and J. Flis: Heat Treat. Met., 1999, vol. 26, pp. 9–16. https://doi.org/10.1201/9780367814151-8.10.1201/9780367814151-8 ↗
14. J. Georges, US patent, 1999, US5989363A.
15. C.X. Li, J. Georges, and X.Y. Li: Surf. Eng., 2002, vol. 18, pp. 453–57. https://doi.org/10.1179/026708402225006240.10.1179/026708402225006240 ↗
16. S.C. Gallo and H. Dong: Surf. Coat. Technol., 2009, vol. 203, pp. 3669–75. https://doi.org/10.1016/j.surfcoat.2009.05.045.10.1016/j.surfcoat.2009.05.045 ↗
17. S.M. Jafarpour, A.V. Pipa, A. Puth, A. Dalke, J. Röpcke, J.-P.H. van Helden, and H. Biermann: Metals, 2021, https://doi.org/10.3390/met11091411.10.3390/met11091411 ↗
18. I. Burlacov, S. Hamann, H.-J. Spies, A. Dalke, J. Röpcke, and H. Biermann: J. Heat Treat. Mater., 2017, vol. 72, pp. 254–59. https://doi.org/10.3139/105.110334.10.3139/105.110334 ↗
19. C. Hopf and W. Jacob: J. Nucl. Mater., 2005, vol. 342, pp. 141–47. https://doi.org/10.1016/j.jnucmat.2005.04.003.10.1016/j.jnucmat.2005.04.003 ↗
20. W. Jacob, C. Hopf, and M. Schlüter: Appl. Phys. Lett., 2005, vol. 86, 204103. https://doi.org/10.1063/1.1931820.10.1063/1.1931820 ↗
21. S.M. Jafarpour, A. Puth, A. Dalke, J. Böcker, A. Pipa, J. Röpcke, J.-P.H. van Helden, and H. Biermann: J. Mater. Res. Technol., 2020, vol. 9, pp. 9195–9205. https://doi.org/10.1016/j.jmrt.2020.06.041.10.1016/j.jmrt.2020.06.041 ↗
22. J. Böcker, A. Puth, A. Dalke, J. Röpcke, J.-P.H. van Helden, and H. Biermann: Coatings, 2020, vol. 10, p. 1112. https://doi.org/10.3390/coatings10111112.10.3390/coatings10111112 ↗
23. S. Jafarpour, A. Dalke, and H. Biermann: J. Heat Treat. Mater., 2020, vol. 75, pp. 95–112. https://doi.org/10.3139/105.110421.10.3139/105.110421 ↗
24. L. Lutterotti, S. Matthies, and H. R. Wenk, MAUD: a friendly Java program for material analysis using diffraction. https://api.semanticscholar.org/CorpusID:136186256. 1999
25. R.E. Dinnebier, A. Leineweber, and J. Evans: Rietveld Refinement, De Gruyter. Boston, 2018, https://doi.org/10.1515/9783110461381.10.1515/9783110461381 ↗
26. G. Petzow: Metallographisches, Keramographisches, Plastographisches Ätzen, Gebrüder Borntraeger, Stuttgart, Germany, 1994.
27. T. Czerwiec, H. He, G. Marcos, T. Thiriet, S. Weber, and H. Michel: Plasma Process. Polym., 2009, vol. 6, pp. 401–409. https://doi.org/10.1002/ppap.200930003.10.1002/ppap.200930003 ↗
28. S.M. Jafarpour, A.V. Pipa, A. Puth, A. Dalke, J. Röpcke, J.-P.H. van Helden, and H. Biermann: Coatings, 2023, vol. 13, p. 1103. https://doi.org/10.3390/coatings13061103.10.3390/coatings13061103 ↗
29. A. Dalke, I. Burlacov, S. Hamann, A. Puth, J. Böcker, H.-J. Spies, J. Röpcke, and H. Biermann: Surf. Coat. Technol., 2019, vol. 357, pp. 1060–68. https://doi.org/10.1016/j.surfcoat.2018.10.095.10.1016/j.surfcoat.2018.10.095 ↗
30. J. Dash and H. Otte: Acta Metall., 1963, vol. 11, pp. 1169–78. https://doi.org/10.1016/0001-6160(63)90044-0.10.1016/0001-6160(63)90044-0 ↗
31. J.A. Venables: Philos. Mag., 1962, vol. 7, pp. 35–44. https://doi.org/10.1080/14786436208201856.10.1080/14786436208201856 ↗
32. J.C. Stinville, P. Villechaise, C. Templier, J.P. Rivière, and M. Drouet: Acta Mater., 2010, vol. 58, pp. 2814–21. https://doi.org/10.1016/j.actamat.2010.01.002.10.1016/j.actamat.2010.01.002 ↗
33. C. Templier, J.C. Stinville, P. Villechaise, P.O. Renault, G. Abrasonis, J.P. Rivière, A. Martinavičius, and M. Drouet: Surf. Coat. Technol., 2010, vol. 204, pp. 2551–58. https://doi.org/10.1016/j.surfcoat.2010.01.041.10.1016/j.surfcoat.2010.01.041 ↗
34. T. Christiansen and M.A.J. Somers: Z. Metallkd., 2006, vol. 97, pp. 79–88. https://doi.org/10.1515/ijmr-2006-0012.10.1515/ijmr-2006-0012 ↗
35. D. Manova, A. Lotnyk, S. Mändl, H. Neumann, and B. Rauschenbach: Mater. Res. Express, 2016, vol. 3, p. 66502. https://doi.org/10.1088/2053-1591/3/6/066502.10.1088/2053-1591/3/6/066502 ↗
36. X.-Y. Li, Y. Sun, and T. Bell: Z. Metallkd., 1999, vol. 90, pp. 901–907. https://doi.org/10.1515/ijmr-1999-901111.10.1515/ijmr-1999-901111 ↗
37. F.C. Nascimento, C.M. Lepienski, C.E. Foerster, A. Assmann, S.L.R. Da Silva, C.J. de M. Siqueira, and A.L. Chinelatto: J. Mater. Sci., 2009, vol. 44, pp. 1045–53. https://doi.org/10.1007/s10853-008-3211-z.10.1007/s10853-008-3211-z ↗
38. T.L. Christiansen, T.S. Hummelshøj, and M.A.J. Somers: Surf. Eng., 2010, vol. 26, pp. 242–47. https://doi.org/10.1179/026708410X12506870724316.10.1179/026708410X12506870724316 ↗
39. B.E. Warren: X-Ray Diffraction, Addison-Wesley Publishing Company, Boston, 1969.
40. Z. Yu, X. Xu, L. Wang, J. Qiang, and Z. Hei: Surf. Coat. Technol., 2002, vol. 153, pp. 125–30. https://doi.org/10.1016/S0257-8972(01)01670-X.10.1016/S0257-8972(01)01670-X ↗
41. F. Borgioli: Metals, 2022, vol. 12, p. 331. https://doi.org/10.3390/met12020331.10.3390/met12020331 ↗
42. M. Fonović, A. Leineweber, O. Robach, E.A. Jägle, and E.J. Mittemeijer: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 4115–31.10.1007/s11661-015-2999-9 ↗
43. M.A.J. Somers and T.L. Christiansen: Thermochemical Surface Engineering of Steels, Woodhead Publishing, Oxford, 2015, pp. 557–79.10.1533/9780857096524.4.557 ↗
44. J. Crank: The Mathematics of Diffusion, Clarendon Press, Oxford, 1975.
45. D.L. Williamson, O. Ozturk, R. Wei, and P.J. Wilbur: Surf. Coat. Technol., 1994, vol. 65, pp. 15–23. https://doi.org/10.1016/S0257-8972(94)80003-0.10.1016/S0257-8972(94)80003-0 ↗
46. Y. Sun: J. Mater. Process. Technol., 2005, vol. 168, pp. 189–94. https://doi.org/10.1016/j.jmatprotec.2004.10.005.10.1016/j.jmatprotec.2004.10.005 ↗
47. M. Tsujikawa, S. Noguchi, N. Yamauchi, N. Ueda, and T. Sone: Surf. Coat. Technol., 2007, vol. 201, pp. 5102–5107. https://doi.org/10.1016/j.surfcoat.2006.07.127.10.1016/j.surfcoat.2006.07.127 ↗
48. C.J. Scheuer, R.P. Cardoso, M. Mafra, and S.F. Brunatto: Surf. Coat. Technol., 2013, vol. 214, pp. 30–37. https://doi.org/10.1016/j.surfcoat.2012.10.060.10.1016/j.surfcoat.2012.10.060 ↗
49. W. Xie, Y. Chen, D. Chen, Y. Yang, C. Zhang, G. Cui, and Y. Wang: Mater. Res. Express, 2020, vol. 7, p. 66406. https://doi.org/10.1088/2053-1591/ab9bef.10.1088/2053-1591/ab9bef ↗
50. D. Manova, C. Günther, A. Bergmann, S. Mändl, H. Neumann, and B. Rauschenbach: Nucl. Instrum. Methods Phys. Res. Sect. B, 2013, vol. 307, pp. 310–14. https://doi.org/10.1016/j.nimb.2012.11.056.10.1016/j.nimb.2012.11.056 ↗
51. J. Wang, J. Xiong, Q. Peng, H. Fan, Y. Wang, G. Li, and B. Shen: Mater Charact, 2009, vol. 60, pp. 197–203. https://doi.org/10.1016/j.matchar.2008.08.011.10.1016/j.matchar.2008.08.011 ↗
52. E. Menthe and K.-T. Rie: Surf. Coat. Technol., 1999, vol. 116–119, pp. 199–204. https://doi.org/10.1016/S0257-8972(99)00085-7.10.1016/S0257-8972(99)00085-7 ↗
53. R.P. Cardoso, C.J. Scheuer, and S.F. Brunatto: Encyclopedia of Iron, Steel, and Their Alloys, Stainless Steel: Low-Temperature Nitriding Kinetics. CRC Press, 2016. https://doi.org/10.1081/E-EISA.10.1081/E-EISA ↗
54. H. Mehrer: Diffusion in Solids: Fundamentals Methods Materials, Diffusion-Controlled Processes, Springer, Berlin, 2007.10.1007/978-3-540-71488-0 ↗
55. I. Lee: Curr. Appl. Phys., 2009, vol. 9, pp. S257–261. https://doi.org/10.1016/j.cap.2009.01.030.10.1016/j.cap.2009.01.030 ↗
56. M. Egawa, N. Ueda, K. Nakata, M. Tsujikawa, and M. Tanaka: Surf. Coat. Technol., 2010, vol. 205, pp. S246–S251. https://doi.org/10.1016/j.surfcoat.2010.07.093.10.1016/j.surfcoat.2010.07.093 ↗