journal article·2024-02

Microstructure Evolution and Austenitic Grain Refinement of Ti-Modified High Mn Steels During Solution Annealing Heat Treatment

Abhinav Karanam, Arnab Sarkar, Erik Nenzen, Viraj Ashok Athavale, Mark Watson, Laura Nicole Bartlett, Lukas Bichler

Publisher page

Abstract

Austenitic high manganese (Mn) steels are often used in harsh environments due to their high toughness and wear resistance. Heat treatments are performed to engineer the microstructure of the steels and optimize their performance for the desired service conditions. This study investigated the effect of titanium (Ti) and heat treatment on the microstructure of cast high Mn steel (HMS) alloys. The results reveal that Ti addition contributed to grain refinement in the as-cast and heat-treated conditions. In-situ observation of microstructure evolution up to 1125 °C confirmed the stability of precipitated TiC particles, while revealing a new mechanism of grain refinement during a solution annealing heat treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. D. Havel: Steel Founders Society of America Technical and Operating, Columbia Steel Inc., 2017, pp. 1–19, https://www.scribd.com/document/394855437/2017-4-1-Columbia-Havel
2. D.K. Subramanyam, A.E. Swansiger, and H.S. Avery: ASM Handbook, Volume 01 - Properties and Selection: Irons, Steels, and High-Performance Alloys, ASM International, Materials Park, 1990, pp. 822–40.10.31399/asm.hb.v01.a0001045 ↗
3. J. Tasker: Encyclopedia of Materials: Science and Technology, Elsevier, Amsterdam, 2011, pp. 411–15.
4. U. Gürol and K. Can: J. Min. Metall. Sect. B Metallurgy, 2020, vol. 56, pp. 171–82.10.2298/JMMB191111009G ↗
5. Y.K. Lee, S.J. Lee, and J. Han: Mater. Sci. Technol., 2016, vol. 32, pp. 1–8.10.1080/02670836.2015.1114252 ↗
6. J. Lee, S.S. Sohn, S. Hong, B.-C. Suh, S.-K. Kim, B.-J. Lee, N.J. Kim, and S. Lee: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, vol. 45, pp. 5419–30.10.1007/s11661-014-2513-9 ↗
7. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
8. E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
9. Society Metals, Metallurgy Metals Society. Applied, and Group Metals Technology: Proceedings of an International Conference Organized by the Applied Metallurgy and Metals Technology Group of the Metals Society, The Metals Society, The University of Warwick, London.
10. K. Selcuk: ASM Handbook, Vol. 9: Metallography and Microstructures, ASM International, Materials Park, 2004.
11. M. Sabzi, S.M. Far, and S.M. Dezfuli: Int. J. Miner. Metall. Mater., 2018, vol. 25, pp. 1431–38.10.1007/s12613-018-1697-1 ↗
12. M. Sabzi and M. Farzam: Mater. Res. Express, 2019, vol. 6, p. 1065.10.1088/2053-1591/ab10ad ↗
13. P. Rama Rao and V.V. Kutumbarao: Int. Mater. Rev., 1989, vol. 34, pp. 69–86.10.1179/imr.1989.34.1.69 ↗
14. P. Zhang, W. Zhuang, W. Wan, and W. Peng: J. Phys: Conf. Ser., 2021, vol. 1948, p. 12204.
15. V.N. Najafabadi, K. Amini, and M.B. Alamdarlo: Metall. Res. Technol., 2014, vol. 111, pp. 375–82.10.1051/metal/2014044 ↗
16. E.R. Magdaluyo, M.S. Ausa, and R.J. Tinio: Transactions on Engineering Technologies, Springer, Singapore, 2016, pp. 73–81.10.1007/978-981-10-1088-0_6 ↗
17. Mohammad Bagher Limooei and Shabnam Hosseini: Proceedings of Conference of Metal, 2012, pp. 1–6.
18. Z. Meng, W. Liu, X. Lv, and C. Zhou: AIP Adv., 2021, vol. 11, pp. 35101-1–35101-7.
19. A.K. Srivastava and K. Das: J. Mater. Sci., 2008, vol. 43, pp. 5654–58.10.1007/s10853-008-2759-y ↗
20. S. Kuyucak, R. Zavadil, and V. Gertsman: Revista de Turnatorie (Roman. Found. J.), 2004, vol. 10, pp. 11–14.
21. S. Ayadi and A. Hadji: Int. J. Metalcast., 2021, vol. 15, pp. 510–19.10.1007/s40962-020-00479-2 ↗
22. F. Haakonsen: Norges teknisk-naturvitenskapelige universitet, Fakultet for naturvitenskap og teknologi, Institutt for materialteknologi, 2009.
23. K.I. Parashivamurthy, M.N. Chandrasekharaiah, P. Sampathkumaran, and S. Seetharamu: Mater. Manuf. Processes, 2006, vol. 21, pp. 473–78.10.1080/10426910500471474 ↗
24. Xu. Zhenming, L. Gaofei, G. Qingfeng, and J. Qichuan: Mater. Res. Bull., 2004, vol. 39, pp. 457–63.10.1016/j.materresbull.2003.10.014 ↗
25. K.I. Parashivamurthy, P. Sampathkumaran, and S. Seetharamu: Cryst. Res. Technol. (1979), 2008, vol. 43, pp. 674–78.10.1002/crat.200711103 ↗
26. Du. Gang and F. Liu: ISIJ Int., 2020, vol. 60, pp. 509–18.10.2355/isijinternational.ISIJINT-2019-535 ↗
27. L. Gui, M. Long, H. Zhang, D. Chen, S. Liu, Q. Wang, and H. Duan: J. Market. Res., 2020, vol. 9, pp. 5499–5514.
28. J. Roger, B. Gardiola, J. Andrieux, J.-C. Viala, and O. Dezellus: J. Mater. Sci., 2017, vol. 52, pp. 4129–41.10.1007/s10853-016-0677-y ↗
29. David A. Porter, K. E. Easterling, Mohamed Y. Sherif, and Corporation Ebooks: Phase Transformations in Metals and Alloys, 3rd ed., CRC Press, Boca Raton, 2009, pp. 189–256.
30. S.-M. Lee, Y.-W. Jun, S.-N. Cho, and J. Cheon: J. Am. Chem. Soc., 2002, vol. 124, pp. 11244–45.10.1021/ja026805j ↗
31. B.S. Murty, S.A. Kori, and M. Chakraborty: Int. Mater. Rev., 2002, vol. 47, pp. 3–29.10.1179/095066001225001049 ↗
32. D. Siafakas: On Deoxidation Practice and Grain Size of Austenitic Manganese Steel, Jönköping University, 2017.10.3390/met7060186 ↗
33. T.K. Bandyopadhyay, S. Chatterjee, and K. Das: J. Mater. Sci., 2004, vol. 39, pp. 5735–42.10.1023/B:JMSC.0000040083.98097.c3 ↗
34. K. Feng, Yi. Yang, B. Shen, and L. Guo: Mater. Des., 2005, vol. 26, pp. 37–40.10.1016/j.matdes.2004.03.014 ↗
35. Y. Liang, Q. Zhao, Z. Zhang, X. Li, and L. Ren: J. Asian Ceram. Soc., 2014, vol. 2, pp. 281–88.10.1016/j.jascer.2014.06.001 ↗
36. W. Ma, F. Tao, C. Jia, and X. Men: AIP Adv., 2019, vol. 9, pp. 75004-1–75004-7.
37. L. Zhong, Xu. Yunhua, M. Hojamberdiev, J. Wang, and J. Wang: Mater. Des., 2011, vol. 32, pp. 3790–95.10.1016/j.matdes.2011.03.031 ↗
38. J. Nie, Wu. Yuying, P. Li, H. Li, and X. Liu: CrystEngComm, 2012, vol. 14, pp. 2213–21.10.1039/c1ce06205k ↗
39. D. Siafakas, T. Matsushita, Å. Lauenstein, J. Ekengård, and A.E.W. Jarfors: Metals, 2017, vol. 7, Art. no. 186. https://doi.org/10.3390/met7060186.10.3390/met7060186 ↗
40. D.A. Porter, K.E. Easterling, and M. Sherif: Phase Transformations in Metals and Alloys (Revised Reprint), Taylor & Francis Group, Boca Raton, 2009, pp. 115–75.10.1201/9781439883570 ↗
41. B.L. Bramfitt: Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 1970, vol. 1, p. 2958.
42. Du. Gang: Mater. Sci. Technol., 2021, vol. 37, pp. 702–10.10.1080/02670836.2020.1738059 ↗
43. L. Saraf: Microsc. Microanal., 2011, vol. 17, pp. 424–25.10.1017/S1431927611002996 ↗
44. H. Li, E. Hsu, J. Szpunar, H. Utsunomiya, and T. Sakai: J. Mater. Sci., 2008, vol. 43, pp. 7148–56.10.1007/s10853-008-3021-3 ↗
45. D. Raabe: Physical Metallurgy, Elsevier, Amsterdam, 2014, pp. 2291–2397.10.1016/B978-0-444-53770-6.00023-X ↗
46. P.J. Apps, J.R. Bowen, and P.B. Prangnell: Acta Mater., 2003, vol. 51, pp. 2811–22.10.1016/S1359-6454(03)00086-7 ↗
47. M.F. Ashby, J. Harper, and J. Lewis: Trans. Metall. Soc. AIME, 1969, vol. 245, p. 413.
48. N. Wang, Y. Ji, Y. Wang, Y. Wen, L.-Q. Chen, Pittsburgh P. A. National Energy Technology Lab, and W. V. In-house Research Morgantown: Acta Mater., 2017, vol. 135, pp. 226–32.