journal article·2023-10

Investigation of Microstructural Characteristics of Cobalt Chromium Molybdenum Additively Manufactured Using Laser Directed Energy Deposition Technology

Theresa Grabowski, Ismat Ara, Joncy Thorpe, Fardad Azarmi

Publisher page

Abstract

The present work conducted a comprehensive microstructural characterization of the cobalt chromium (CoCr) alloy manufactured via laser direct energy deposition (L-DED) technology. High-resolution microscopy using both optical and electron microscopy were carried out for the identification of the grain morphology, pores, and grain boundaries. In addition, the crystal structures of the major phases, lattice parameter, interplanar atomic distances, and crystallite size were calculated from X-ray diffraction (XRD) analysis and the transmission electron microscopy (TEM). All characterization experiments were conducted on the conventionally processed CoCr sample as well for the reason of comparison. While the ε-HCP and γ-FCC cobalt phases were detected in both samples, the lower volume fraction of the ε-HCP structure was measured in the L-DED sample. A slight difference was found between the values of the calculated lattice parameters of the two CoCr alloys. Finally, the TEM confirmed the existence of the planes and the crystal structures as detected by the XRD experiment. This is preliminary work; future studies on the microstructural characteristics as well as the mechanical properties of the different alloys will help to establish a relationship between the process-microstructure-properties for the L-DED processed metallic materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. M. Liu and M. Kuttolamadom: in 2021 16th International Manufacturing Science and Engineering Conference, vol. 1, ASME, 2021.
2. C. Song, M. Zhang, Y. Yang, D. Wang, and Y. Jia-kuo: Mater. Sci. Eng. A, 2018, vol. 713, pp. 206–13.10.1016/j.msea.2017.12.035 ↗
3. J.V. Giacchi, C.N. Morando, O. Fornaro, and H.A. Palacio: Mater. Charact., 2011, vol. 62(1), pp. 53–61.10.1016/j.matchar.2010.10.011 ↗
4. R.H. Oskouei, M.R. Barati, H. Farhoudi, M. Taylor, and L.B. Solomon: Mater. Sci. Eng. C, 2017, vol. 79, pp. 390–98.10.1016/j.msec.2017.05.086 ↗
5. A. Chiba, K. Kumagai, N. Nomura, and S. Miyakawa: Acta Mater., 2007, vol. 55(4), pp. 1309–18.10.1016/j.actamat.2006.10.005 ↗
6. Y. Chen, Y. Li, S. Kurosu, K. Yamanaka, N. Tang, and A. Chiba: Wear, 2014, vol. 319(1), pp. 200–10.10.1016/j.wear.2014.07.022 ↗
7. M. Szala, K. Beer-Lech, K. Gancarczyk, O.B. Kilic, P. Pędrak, A. Özer, and A. Skic: Adv. Sci. Technol. Res. J., 2017, vol. 11(4), pp. 76–82.10.12913/22998624/80901 ↗
8. M. Roudnicka, J. Bigas, O. Molnarova, D. Palousek, and D. Vojtech: Metals, 2021, vol. 11(5), p. 687.10.3390/met11050687 ↗
9. P. Panigrahi, Y. Liao, M.T. Mathew, A. Fischer, M.A. Wimmer, L.J. Jacobs, and L.D. Marks: J. Biomed. Mater. Res. Part B Appl. Biomater., 2014, vol. 102(4), pp. 850–59.10.1002/jbm.b.33067 ↗
10. B. Stucker, C. Esplin, and D. Justin: International Solid Freeform Fabrication Symposium, 2004, pp. 68–79.
11. G.D. Janaki Ram, C.K. Esplin, and B.E. Stucker: J. Mater. Sci. Mater. Med., 2008, vol. 19(5), pp. 2105–11.10.1007/s10856-007-3078-6 ↗
12. F.A. España, V.K. Balla, S. Bose, and A. Bandyopadhyay: Mater. Sci. Eng. C, 2010, vol. 30(1), pp. 50–57.10.1016/j.msec.2009.08.006 ↗
13. S. Eshkabilov, I. Ara, and F. Azarmi: Int. J. Adv. Manuf. Technol., 2022, vol. 123, pp. 2733–56.10.1007/s00170-022-10331-y ↗
14. Ó. Barro, F. Arias-González, F. Lusquiños, R. Comesaña, J.D. Val, A. Riveiro, A. Badaoui, and F. Gómez-Baño: Metals, 2020, vol. 10(10), p. 1291.10.3390/met10101291 ↗
15. S. Mazumder, M.V. Pantawane, S.M. Patil, M. Radhakrishnan, S. Sharma, M. McKinstry, and N.B. Dahotre: Adv. Eng. Mater., 2022, vol. 24(11), p. 2200352.10.1002/adem.202200352 ↗
16. K.M. Mantrala, M. Das, V.K. Balla, C. Srinivasa Rao, and V.V.S. Kesava Rao: J. Mater. Res., 2014, vol. 29(17), pp. 2021–27.10.1557/jmr.2014.163 ↗
17. D. Narayanan, M. Liu, M. Kuttolamadom, and H. Castaneda: Corros. Sci., 2022, vol. 207, 110599.10.1016/j.corsci.2022.110599 ↗
18. M. Chimmat and D. Srinivasan: Procedia Struct. Integr., 2019, vol. 14, pp. 746–57.10.1016/j.prostr.2019.05.093 ↗
19. K. Darvish, Z.W. Chen, and T. Pasan: Mater. Des., 2016, vol. 112, pp. 357–66.10.1016/j.matdes.2016.09.086 ↗
20. ASTM International Standard F3187-16: Standard Guide for Directed Energy Deposition of Metals, ASTM International, West Conshohocken, 2016.
21. D.G. Ahn: Int. J. Precis. Eng. Manuf. Technol., 2021, vol. 8(2), pp. 703–42.10.1007/s40684-020-00302-7 ↗
22. ASTM International Standard E112-13: Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, 2021.
23. M. Sage and C. Guillaud: Rev. Métall., 1950, vol. 47(2), pp. 139–45.10.1051/metal/195047020139 ↗
24. B.D. Cullity: Elements of X-ray Diffraction, Addison-Wesley, Reading, 1956.
25. A. Saboori, A. Aversa, F. Bosio, E. Bassini, E. Librera, M. DeChirico, S. Biamino, D. Ugues, P. Fino, and M. Lombardi: Mater. Sci. Eng. A, 2019, vol. 766, 138360.10.1016/j.msea.2019.138360 ↗
26. M.S. Pham, B. Dovgyy, P.A. Hooper, C.M. Gourlay, and A. Piglione: Nat. Commun., 2020, vol. 11(1), pp. 1–2.10.1038/s41467-020-14453-3 ↗
27. D. Kong, C. Dong, S. Wei, X. Ni, L. Zhang, R. Li, L. Wang, C. Man, and X. Li: Addit. Manuf., 2021, vol. 38, 101804.
28. I. Ara, F. Azarmi, and X.W. Tangpong: Metallogr. Microstruct. Anal., 2021, vol. 10(6), pp. 754–67.10.1007/s13632-021-00798-8 ↗
29. A. Piglione, B. Dovgyy, C. Liu, C.M. Gourlay, P.A. Hooper, and M.S. Pham: Mater. Lett., 2018, vol. 224, pp. 22–25.10.1016/j.matlet.2018.04.052 ↗
30. Z. Wang, S.Y. Tang, S. Scudino, Yu.P. Ivanov, R.T. Qu, D. Wang, C. Yang, W.W. Zhang, A.L. Greer, J. Eckert, and K.G. Prashanth: Addit. Manuf., 2021, vol. 37, 101725.
31. R. Casati, M.H. Nasab, M. Coduri, V. Tirelli, and M. Vedani: Metals, 2018, vol. 8, p. 954.10.3390/met8110954 ↗
32. E. Girardin, G. Barucca, P. Mengucci, F. Fiori, E. Bassoli, A. Gatto, L. Iuliano, and B. Rutkowski: Mater. Today Proc., 2016, vol. 3(3), pp. 889–97.10.1016/j.matpr.2016.02.022 ↗
33. D. Srinivasan and K. Ananth: J. Indian Inst. Sci., 2022, vol. 102(1), pp. 311–49.10.1007/s41745-022-00290-4 ↗
34. C. Cui, M. Wu, R. He, Y. Gong, and X. Miao: Mater. Chem. Phys., 2022, vol. 291, 126681.10.1016/j.matchemphys.2022.126681 ↗
35. J.A. Spittle: Int. Mater. Rev., 2006, vol. 51(4), pp. 247–69.10.1179/174328006X102493 ↗
36. E. Ahearne and S. Baron: CIRP J. Manuf. Sci. Technol., 2017, vol. 19, pp. 1–6.10.1016/j.cirpj.2017.02.001 ↗
37. C. Balagna, S. Spriano, and M.G. Faga: Mater. Sci. Eng. C, 2012, vol. 32(7), pp. 1868–77.10.1016/j.msec.2012.05.003 ↗
38. A. Łukaszczyk and J. Augustyn-Pieniązek: Arch. Metall. Mater., 2015, vol. 60(1), pp. 523–28.10.1515/amm-2015-0084 ↗
39. S.M.J. Razavi, A. Avanzini, G. Cornacchia, L. Giorleo, and F. Berto: Int. J. Fatigue, 2020, vol. 142, 105926.10.1016/j.ijfatigue.2020.105926 ↗
40. B. Qian, K. Saeidi, L. Kvetková, F. Lofaj, C. Xiao, and Z. Shen: Dent. Mater., 2015, vol. 31(12), pp. 1435–44.10.1016/j.dental.2015.09.003 ↗
41. K. Kumagai, N. Nomura, T. Ono, M. Hotta, and A. Chiba: Mater. Trans., 2006, vol. 46(7), pp. 1578–87.10.2320/matertrans.46.1578 ↗
42. A. Bordin, A. Ghiotti, S. Bruschi, L. Facchini, and F. Bucciotti: Procedia CIRP, 2014, vol. 14, pp. 89–94.10.1016/j.procir.2014.03.082 ↗
43. R. Goodall: Data Br., 2019, vol. 26, 104515.10.1016/j.dib.2019.104515 ↗
44. J.D. Robson: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, vol. 45(8), pp. 3205–12.10.1007/s11661-013-1950-1 ↗
45. M.M. Gong, F. Liu, and Y.Z. Chen: J. Alloys Compd., 2016, vol. 682, pp. 89–97.10.1016/j.jallcom.2016.04.284 ↗
46. B. AlMangour, M. Luqman, D. Grzesiak, H. Al-Harbi, and F. Ijaz: Mater. Sci. Eng. A, 2020, vol. 792, 139456.10.1016/j.msea.2020.139456 ↗
47. H.T. Im, D.H. Kim, Y. Do Kim, J.O. Fadonougbo, C.B. Mo, J.Y. Park, K.B. Park, J.W. Kang, H.S. Kang, and H.K. Park: Mater. Charact., 2022, vol. 186, p. 111767.10.1016/j.matchar.2022.111767 ↗
48. S. Mazumder, S. Palaniappan, M.V. Radhakrishnan, M. Patil, S.M. Dowden, S. Mahajan, C. Mukherjee, and N.B. Dahotre: Appl. Phys. A, 2023, vol. 129, p. 332.10.1007/s00339-023-06589-y ↗
49. T. Suszko, W. Gulbiński, E. Dobruchowska, G. Greczynski, L. Hultman, and J. Morgiel: Surf. Coat. Technol., 2019, vol. 378, p. 124910.10.1016/j.surfcoat.2019.124910 ↗
50. W.J. Wang, K.C. Yung, H.S. Choy, T.Y. Xiao, and Z.X. Cai: Appl. Surf. Sci., 2018, vol. 443, pp. 167–75.10.1016/j.apsusc.2018.02.246 ↗
51. N.C. Dahn, D. Morphy, and K. Rajan: Acta Metall., 1984, vol. 32(9), pp. 1317–22.10.1016/0001-6160(84)90077-4 ↗