journal article·2023-08Open access

Experimental Investigation and Thermodynamic Description of the Co–Nb–Zr System

Jiaxing Sun, Cuiping Guo, Changrong Li, Zhenmin Du

Abstract

The liquidus surface projection and isothermal sections at 1100 and 1000 °C of the Co–Nb–Zr system were constructed by analyzing the solidification morphology of as-cast alloys and annealed microstructure of the equilibrated alloys and diffusion couples. Six primary solidification areas were obtained in the liquidus surface projection, and four primary solidification areas were deduced from the binary phase diagram. Additionally, three three-phase regions at 1100 °C and five three-phase regions at 1000 °C were determined in the isothermal sections. Based on the experimental information, a thermodynamic description of the Co–Nb–Zr system was established using the CALPHAD (CALculation of PHAse Diagram) method. The thermodynamic models of intermetallic phases Co11Zr2, Co23Zr6, CoZr2, Co7Nb2, λ1, λ2 and λ3, were described as (Co)11(Nb,Zr)2, (Co)23(Nb,Zr)6, (Co,Zr)(Nb,Zr)2, Co7Nb2, (Co,Nb)2(Co,Nb), (Co,Nb,Zr)2(Co,Nb,Zr) and (Co,Nb)2(Co,Nb), respectively. CoZr3 and μ were modeled as (Co,Zr)(Co,Zr)Zr2 and (Co,Nb,Zr)1(Nb,Zr)4(Co,Nb,Zr)2(Co,Nb,Zr)6. Moreso, CoZr with the structure of B2 was described as an ordered phase of bcc_A2. Thus, a reasonable thermodynamic description of the Co–Nb–Zr system was obtained, and the experimental information was well reproduced.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. J. Zhao, F. Ma, P. Liu, X. Liu, W. Li, and D. He: J. Mater. Eng. Perform., 2020, vol. 29, pp. 3736–44.10.1007/s11665-020-04874-y ↗
2. T. Nagase, Y. Iijima, A. Matsugaki, K. Ameyama, and T. Nakano: Mater. Sci. Eng. C, 2020, vol. 107, p. 110322.10.1016/j.msec.2019.110322 ↗
3. Z. Han, X. Liu, S. Zhao, Y. Shao, J. Li, and K. Yao: Prog. Nat. Sci. Mater., 2015, vol. 25, pp. 365–69.10.1016/j.pnsc.2015.09.001 ↗
4. T. Omori, K. Oikawa, J. Sato, I. Ohnuma, U.R. Kattner, R. Kainuma, and K. Ishida: Intermetallics, 2013, vol. 32, pp. 274–83.10.1016/j.intermet.2012.07.033 ↗
5. I. Povstugar, P.P. Choi, S. Neumeier, A. Bauer, C.H. Zenk, M. Göken, and D. Raabe: Acta Mater., 2014, vol. 78, pp. 78–85.10.1016/j.actamat.2014.06.020 ↗
6. X. Liu, Y. Pan, Y. Chen, J. Han, S. Yang, J. Ruan, C. Wang, Y. Yang, and Y. Li: Metals, 2018, vol. 8, p. 563.10.3390/met8070563 ↗
7. S.G. Huang, R.L. Liu, L. Li, O.V. Der Biset, and J. Vleugels: Int. J. Refract. Met. H Mater., 2008, vol. 26, pp. 389–95.10.1016/j.ijrmhm.2007.09.003 ↗
8. D.A. Sandoval, J.J. Roa, O. Ther, E. Tarrés, and L. Llanes: J. Alloys Compd., 2019, vol. 777, pp. 593–601.10.1016/j.jallcom.2018.11.001 ↗
9. X. Liu, C. Luo, M. Yang, S. Yang, J. Zhang, Y. Huang, J. Han, Y. Lu, and C. Wang: J. Phase Equilib. Diffus., 2020, vol. 41, pp. 3–14.10.1007/s11669-019-00773-5 ↗
10. W. Gui, H. Zhang, M. Yang, T. Jin, X. Sun, and Q. Zheng: J. Alloys Compd., 2017, vol. 695, pp. 1271–78.10.1016/j.jallcom.2016.10.256 ↗
11. Y. Liu, L. Zhang, T. Pan, D. Yu, and Y. Ge: CALPHAD, 2008, vol. 32, pp. 455–61.10.1016/j.calphad.2008.06.008 ↗
12. J. Ågren: Curr. Opin. Solid State Mater. Sci., 1996, vol. 1, pp. 355–60.10.1016/S1359-0286(96)80025-8 ↗
13. H. Okamoto: J. Phase. Equilib., 2000, vol. 21, p. 495.10.1361/105497100770339770 ↗
14. F. Stein, D. Jiang, M. Palm, G. Sauthoff, D. Grüner, and G. Kreiner: Intermetallics, 2008, vol. 16, pp. 785–92.10.1016/j.intermet.2008.02.017 ↗
15. K.C.H. Kumar, I. Ansara, P. Wollants, and L. Delaey: J. Alloys Compd., 1998, vol. 267, pp. 105–12.10.1016/S0925-8388(97)00465-9 ↗
16. C. He, F. Stein, and M. Palm: MRS Online Proceedings Library (OPL), 2008, p. 1128.10.1557/PROC-1128-U05-30 ↗
17. L. Zhou, C. Wang, Y. Yu, X. Liu, H. Chinen, T. Omori, R. Kainuma, and K. Ishida: J. Alloys Compd., 2011, vol. 509, pp. 1554–62.10.1016/j.jallcom.2010.10.058 ↗
18. C. He, F. Stein, and M. Palm: J. Alloys Compd., 2015, vol. 637, pp. 361–75.10.1016/j.jallcom.2015.02.182 ↗
19. D. Wei, X. Bai, C. Guo, R. Li, and Z. Du: J. Alloys Compd., 2022, vol. 924, 166516.10.1016/j.jallcom.2022.166516 ↗
20. W.H. Pechin, D.E. Williams, and W.L. Larsen: Am. Soc. Met. Trans. Q., 1964, vol. 57, p. 744.
21. S.K. Bataleva, V.V. Kuprina, V.V. Burnasheva, V.Y. Markiv, and G.N. Ronami: Moscow Univ. Chem. Bull., 1970, vol. 25, pp. 33–36.
22. X. Liu, H. Zhang, C. Wang, and K. Ishida: J. Alloys Compd., 2009, vol. 482, pp. 99–105.10.1016/j.jallcom.2009.04.032 ↗
23. A. Durga and K.C. Kumar: CALPHAD, 2010, vol. 34, pp. 200–05.10.1016/j.calphad.2010.02.006 ↗
24. A. Durga, K.C. Kumar, N. Moelans, and P. Wollants: J. Alloys Compd., 2010, vol. 334, pp. 173–81.
25. T. Kosorukova, P. Agraval, V. Ivanchenko, and M. Turchanin: in XI International Conference on Crystal Chemistry of Intermetallic Compounds, 2010, p. 52.
26. J.C. Gachon and J. Hertz: CALPHAD, 1983, vol. 7, pp. 1–2.10.1016/0364-5916(83)90024-X ↗
27. C. Zhou and H. Wang: J. Phase Equilib. Diffus., 2021, vol. 42, pp. 77–90.10.1007/s11669-020-00859-5 ↗
28. A.F. Guillermet: Int. J. Mater. Res., 1991, vol. 82, pp. 478–87.10.1515/ijmr-1991-820609 ↗
29. J. Li, Y. Guo, S. Yang, Z. Shi, C. Wang, and X. Liu: J. Alloys Compd., 2015, vol. 642, pp. 216–24.10.1016/j.jallcom.2015.01.204 ↗
30. A.A. Kodentsov, G.F. Bastin, and F.J.J. van Loo: J. Alloys Compd., 2001, vol. 320, pp. 207–17.10.1016/S0925-8388(00)01487-0 ↗
31. A.T. Dinsdale: SGTE Pure ELEMENTS (Unary) Database, version 4.5, 2006.
32. O. Redlich and A.T. Kister: Ind. Eng. Chem., 1948, vol. 40, pp. 345–48.10.1021/ie50458a036 ↗
33. J. Sun, C. Ming, B. Yang, C. Guo, C. Li, and Z. Du: J. Alloys Compd., 2023, vol. 939, 168696.10.1016/j.jallcom.2022.168696 ↗